Marine Equipment Dealers in Thane

• Country of Origin: India
• Type: Torches
• Application: Lighting
• Voltage: 0-12VDC
• Color: Blue
• Condition: New
• Power: Battery
• Certifications: CE Certified
• IP Rating: IP70
• Light Source: Led

• Color: Multicolor
• Driven Type: Electric
• Installation: Wall Mounted
• Blade Material: Iron, Steel
• Warranty: 1year
• Brand Name: Bajaj, Orient, Usha, Havells Etc.

Dock Bumpers These are rubber Bumpers for mounting in front of Dock to prevent truck damaging the Dock Leveler while reversing.

• Warranty: 1 Year
• Fabrication: Field-Assembled
• Air Flow: Induced Draft / Cross Type.
• Water Flow: 000 M3/Hr Per Cell
• Pressure Connection: 1/4
• Type of CT: Counter Flow / Cross Flow

OverviewThis engineering note has been prepared to educating the Cooling Tower user, this deals with a very specific subjects, which Aerotech Energy Pvt Ltd appeal our capabilities to do the CT Up-Gradation Projects.Aerotech prepared the documents so that the user engineers can easily understand the cooling tower theory and possibilities to upgrade on existing Cooling TowersWhat is a cooling tower?Cooled water is needed for, for example, air conditioners, manufacturing processes or power generation. A cooling tower is an equipment used to reduce the temperature of a water stream by extracting heat from water and emitting it to the atmosphere. Cooling towers make use of evaporation whereby some of the water is evaporated into a moving air stream and subsequently discharged into the atmosphere. As a result, the remainder of the water is cooled down significantly. Cooling towers are able to lower the water temperatures more than devices that use only air to reject heat, like the radiator in a car, and are therefore more cost-effective and energy efficient.Components of a cooling towerThe basic components of a cooling tower include the frame and casing, fill, cold-water basin, drift eliminators, air inlet, louvers, nozzles and fans. These are described below.Frame and casing. Most towers have structural frames that support the exterior enclosures (casings), motors, fans, and other components. With some smaller designs, such as some glass fiber units, the casing may essentially be the frame.   TYPES OF COOLING TOWERSThis section describes the two main types of cooling towers: the natural draft and mechanical draft cooling towers.Mechanical draft towers are available in a large range of capacities. Towers can be either factory built or field erected – for example concrete towers are only field erected.Many towers are constructed so that they can be grouped together to achieve the desired capacity. Thus, many cooling towers are assemblies of two or more individual cooling towers or “cells.” The number of cells they have, e.g., a eight-cell tower, often refers to such towers. Multiple-cell towers can be lineal, square, or round depending upon the shape of the individual cells and whether the air inlets are located on the sides or bottoms of the cells.The three types of mechanical draft towers Type of cooling tower Forced draft cooling tower: air is blown through the tower by a fan located in the air inlet Induced draft cross flow cooling tower water enters at top and passes over fill, air enters on one side (single-flow tower) or opposite sides (double-flow tower) , an induced draft fan draws air across fill towards exit at top of tower Induced draft counter flow cooling tower, hot water enters at the top, air enters bottom and exits at the top, uses forced and induced draft fans.

The International Convention for the safety of Life at Sea (SOLAS)of 1914 dictates that every ship needs to carry rescue boats. Since then the development of rescue vessels has seen a tremendous innovative growth. New developments in boat design and materials helped to improve speed and durability. Which in turn gave rescue services, as the police and coastguard, a powerful tool to perform their tasks. The rigid Fast Rescue Boats (FRB’s) are primarily used for SAR/MOB operations, because of their fast response time and big capacity. They can also be used for crew transfer, inspections, patrols and so on. Because of their deep V-shaped hulls they have excellent performance on sea, even at high speeds. The Fast Rescue Boats produced for Euro Offshore comply with the latest SOLAS requirements and LSA code. We produce FRB’s with a capacity from 8 to 16 persons and with top speeds from 22 knots to 30 knots. We offer a wide range of inflatable or semi-rigid boats for the emergency services, rescue agencies, commercial shipping companies and other organisations who need work / rescue / sports / safety boats. Available in a wide range of sizes and equipment-configurations, and with SOLAS/MED approval/compliance where appropriate. Manufactured in Germany by Deutsche Schlauchboot GmbH, one of the most experienced manufacturers in the world for life-saving equipment for civil and military use. In fire and rescue work, the emphasis is usually on the rescue part. More than 90% of calls are to get people out of trouble. That often means going out in water too rough for most small craft, in low visibility and high wind, which puts a premium on BCGP's Impacts and Whalers because of their superior lateral stability, sea keeping capabilities and flotation. Even if they take water over the bow, they drain and keep going - so a rescue operation doesn't end up with the rescuers in the water. Impact RHIBs are popular rescue boats because their inflatable collars reduce the risk of impact or injury in a recovery situation in high wind and waves. On the other hand, rescue doors on fiberglass Whaler hulls make it easy to get victims into the boat or divers in and out of the water. The deck is just four inches above the water, so personnel don't injure their backs trying to pull a couple of hundred pounds of weight over a two-foot gunnels. And rescue rails keep victims and divers in close contact with the vessel and out of danger of the props. When you actually have the task of fighting a fire, BCGP has you covered. We offer an extensive array of marine pumps, lights and electronics to get you to the scene so you can do your job. BCGP fire/rescue boats meet a wide range of requirements for coastal, inland lake or river applications. You can get a turnkey boat with all the options you need or a basic platform ready for you to add your own equipment.

• Material: Stainless Steel Etc
• Application: Pharmaceutical And Other Process Industries.
• Series N0: 501
• Design: ASME B 16.34
• Size & Ratings: 15 mm to 150mm ANSI 150# to 300# .
• End Coneection: Flanged, Screwed.
• Trim Material: Stainless Steel
• Seat Leakage: As per Fci-70.02 (ansi B 16.104) Class Iv, V and Vi(standard Leakage Rates) Metal to Soft Seating –

Design Features : Simple and economic design Wide reduced pressure range Self actuating type, does not require any auxiliary energy Long trouble free service Valve Disc is reversible and can be changed quickly for renewed life Pressure balanced design, any fluctuations in the inlet pressures has negligible effect on the regulated pressure For Downstream or upstream pressure regulation. Pressure adjustment by single adjusting screw

Intact360 Manufacturers, Suppliers and Exporter of wide range mooring ropes for General Cargo, Tugboats and Mooring Systems. Benefits of Mooring Ropes:   Safe worksites   Low weight   Easy handling   Floats in water   Similar strength as steel wire rope of the same size   Hand-friendly   Resistant to most chemicals   Longer Life and No Rust like Steel Wire Ropes   No need for grease/lubrication   High Tension and Bending fatigue resistance

The company is primarily engaged in supplying the finest range of Pressure Reducing Valve in all over the country. These Pressure Reducing Valves are available with us in different materials and specifications to meet diverse requirements. The clients can avail these Pressure Reducing Valves from us in bulk quantities at reasonable prices.Details : Materials - Cast Steel, Forge Steel, Mild Steel, Alloy Steel, ASTM A216 WCB, A 105, WC9, WC6, WC5, WC12,F11, F-22, SS - 304, SS- 304L, SS - 316, SS - 316L and other also. Pressure Class Ratings - Socket weld, Screwed End, but weld, Flanged, 150, 300, 600, 800, 900, 1500 & 2500 with IBR Certificate. Size Of Valves - ½” to 36"

• Country of Origin: India
• Type: Indicator Lamps
• Shape: Square
• Application: Electricity
• Color: Red
• Feature: Low Consumption, Stable Performance, Suitable For Indoor Or Outdoor
• Voltage: 220V
• Feature: Blinking Diming, Bright And Shining

• Automation Grade: Manual
• Media: Water Fitting

We provide Forged Steel Globe Valves that are precision engineered using best quality raw material.

• Material: Metal
• Application: Gas Fitting
• Feature: Casting Approved, Durable
• Size: Standard
• Surface: Color Coated
• Packaging Details: Standard packing

The container pressure of chlorine varies between 8-10 Kg/Cm2, which is very high to either meter or doze accurately. Hence a pressure reducing valve is used in the system. This valve is capable of reducing the pressure of chlorine to manageable limit of approximately 2 Kg/Cm2. The pressure reducing valve is spring loaded with PTFE diaphragm. This valve prevents the reliquification in the system.

We are offer wide range of globe valve, e.g. Forged steel globe valve, cast steel globe valve, stainless steel globe valve, gun metal (bronze) globe valve, bellow seal globe valve, chlorine service globe valve, cryogenic globe valve, & more.

We are the exporter and supplier of this products.

• Material: Carbon Steeel, Cast Iron, Cast Steel, Gun Metal, Metal, Stainless Steel
• Certification: ISO 9001:2008 Certified
• Color: Blue, Sky Blue, White
• Size: 1.1/2inch, 1/2inch, 1inch, 2inch, 3/4inch, 4/5
• Type: Globe Valve
• Application: Gas Fitting, Oil Fitting, Water Fitting
• Pattern: Plain
• Power: Manual
• Pressure: High, Low, Medium
• Feature: Investment Casting
• Technic: Gear Operated
• Number Of Way: 2way

• Size: 10X100
• Type: PIN TYPE
• Material: GI
• Diameter: 10
• Length: 100