Motor Pumps Dealers in Thane

• Brand Name: Airflow Pumps
• Processing Type: Mfgs
• Driven Type: Mechanical, Pneumatic
• Condition: New
• Pressure: 0-10Bar
• Automation Grade: Manual, Semi Automatic

• Application: Industrial
• Voltage: 220V
• Driven Type: Electric
• Pressure: High Pressure, Low Pressure, Medium Pressure
• Head: 2 meter
• Max Flow Rate: 1 lpm
• Model: G-m-01

Technical data  Motor single or three phase ( Normally all are taking single phase unit to avid overload problem ) Manifold block : 85 x 85 x 45 mm having relief valve inbuilt with one out let and one gauge port.we have made provision in same block for relief oil to get back in tank through pump itself. Gear Pump: 0.2/0.5 /1.0 lpm at 15 bar pressure. Tank ; 3 /5/8 lt  Oil window; standard 3 inch Suctions filter 1/4 bsp if needed following can be provided with extra cost Float switch  Pressure switch. Motor is mounted on manifold with 5x20 mm Allen screws from top end and pump is mounted with 5x45 Allen cap screws from bottom. This make assembly very easy and any one ca simply open the system to clean . assembly is mounted on tank from top by 5x20 Allen cap screws. This make unit most user friendly.   Price :  Single phase motorized pump 0.2  spm-02    Rs 7800/-  Single phase motorized pump 0.5  spm-05    Rs 7950/- Single phase motorized pump 1.0  spm- 10   Rs 8120/- Above all units are also available with three phase motor you have to specify tpm.  single phase lubrication unit   0.2/0.5 lpm      spm-0-00-05   Rs 10,800/- single phase lubrication unit   1.0 lpm            spm-0-00-10   Rs 11,800/- For float switch say f instated 0  ( spm-f-00-05) For .Pressure switch say P at 00  ( spm-0-p-10)

• Voltage: 415 V
• Brand Name: Lubrotech
• Head: 2 Mtrs
• Motor Phase: 3 Phase
• Automation Grade: Automatic
• Discharge: 3 LPM at 1500 RPM
• Frequency: 50 Hz
• Motor: 0.25 hp

We manufacture quality canned motor pumps that are extensively used in refienery and chemical plants for transportation of the fluid. These pumps are perfectly sealed and provides a model fluid transmission even in the most difficult environment. High in efficiency, our motor pumps are capable to withstand high pressure and are suitable for transmission of hot and cold liquids.

Dry running rotary vane pumps offer the ideal solution for a wide range of application, from paper handling and electronics to environmental technology. These rotary vane pumps are environmentally friendly, highly efficient, vibration free and extremely reliable. Service access is easy.   Features & Applications Features & benefits Applications Oil-less Long life Compact Low noise Pulsation free Low vibration Vacuum lifting Automation / Pick & Place Medical Printing Sewage Treatment Pond Aeration

Specifications of Canned Motor Pumps FLOWWELL with thirteen years experience in glandless pump design and manufacturing, ventured in canned motor pumps to cater the specific industrial needs. FLOWWELL Canned Motor pumps are compact in design, Vacuum tight, Centrifugal, Monobloc pumpsets suitable to operate in any atmospheric condition. Can be suited even for submerged operation. All the motors are helium leak tested to 10x -7 std. CC/sec.     SALIENT FEATURES :- Maintenance free Compact in size Seamless in construction Very low noise No misalignment Very Low vibration No rigid mounting Flame and explosion proof optional   Material of construction :- Casing, Impeller & Brg. Housings: SS Cans: SS 316L, Hastelloy C Bearings: Carbon graphite Winding Insulation: Class ‘H’   ADVANTAGES :- The mister protected motor Bearing monitor for bearing checks Very low vibration and noise Bearings and sleeves are easy replaceable Protected while handling under vacuum conditions Suitable for low NPSH requirements No lubrication required No mechanical seal, no leak. Monobloc in construction No alignment required. No rigid foundation required Pump and motor is single unit Ensures zero leak at all conditions     Bearing Monitor to check the life of bearings. Part of the pumping liquid is circulated through the air gap and bearings for cooling and lubrication.  

We are pleased to introduce HACO LUB motorized barrel pump, one of the best performing barrel and container pumps in the world. HACO LUB is manufactured in mild steel with a sealless construction making its use versatile for handling wide range of lubricants and chemicals.

Assembly is accomplished simply by hand-tight threading of the pump to the motor.Accurate alignment and ease of service. Simple Construction.Flameproof motor allow using pump in hazardous environment.

• Brand Name: SUTECH PUMPS
• Application: CHEMICAL,OIL,LUBRICANT TRANSFER FROM ONE BARREL TO ANOTHER BARREL OR DRUM
• Certification: MSME
• Application: PAINTS,CHEMICAL,PHARMACEUTICAL,TEXTILE,PETROCHEMICAL INDL.
• Processing Type: TRANSFER OF LIQUID
• Application: LIQUID TRANSFER BARREL PUMP
• Power: ELECTRICAL AND PNEUMATIC OPERATED
• Machine Type: MOTORIZED BARREL PUMP
• Pressure: 4 TO 5 BAR
• Structure: VERTICAL
• Max. Flow lpm: 110
• Max. Head mtrs.: 10
• Motor HP: 1 HP
• Temperature of liquid: 50 TO 60 DEGREE
• Max. Viscosity: 400 CP

Motorized Flame Proof Barrel Pumps

Electric Motor-Driven Pumps, Paper Roll Clamp Attachment

motorized barrel pump, Cleaning Tools, wet application tube cleaner

electric motor pump, Monoblock Pump, Pressure Booster Pump, two stage pump

motor driven pumps, bulldozer pumps, Reciprocating Piston Pump, Crate Washer

motor pumps, electrical control pumps, Submersible pumps, Water Pumps

External Motorized Pump, Networked Access Solutions services