Nova Valves Dealers in Wagle Estate, Thane

TYPE of Valves : 2 way, 3 way, 4 way, 5 way, 1 piece, 2 piece, 3 piece Design.Quarter turn, Half turn, Full turn i.e. L Port 900, T Port ( full turn ) A Ball Valve Is A Valve With A Spherical Disc, The Part Of The Valve Which Controls The Flow Through It. The Sphere Has A Hole, Or Port, Through The Middle So That When The Port Is In Line With Both Ends Of The Valve, Flow Will Occur. When The Valve Is Closed, The Hole Is Perpendicular To The Ends Of The Valve, And Flow Is Blocked. The Handle Or Lever Will Be Inline With The Port Position Letting You "See" The Valve's Position. The Ball Valve, Along With The Butterfly Valve And Plug Valve, Are Part Of The Family Of Quarter Turn Valves. Types of ball valveThere are five general body styles of ball valves: single body, three piece body, split body, top entry, and welded. The difference is based on how the pieces of the valve—especially the casing that contains the ball itself—are manufactured and assembled. The valve operation is the same in each case. Duplex ball valveIn addition, there are different styles related to the bore of the ball mechanism itself:A full port or more commonly known full bore ball valve has an over-sized ball so that the hole in the ball is the same size as the pipeline resulting in lower friction loss. Flow is unrestricted but the valve is larger and more expensive so this is only used where free flow is required, for example in pipelines which require pigging.In reduced port or more commonly known reduced bore ball valves, flow through the valve is one pipe size smaller than the valve's pipe size resulting in flow area being smaller than pipe. As the flow discharge remains constant and is equal to area of flow (A) times velocity (V), A1V1 = A2V2 the velocity increases with reduced area of flowThree-way and four-way ball valvesSchematic 3 way ball valve: L-shaped ball right, T-shaped leftThree-way ball valves have an L- or T-shaped hole through the middle. The different combinations of flow are shown in the figure. It is easy to see that a T valve can connect any pair of ports, or all three, together, but the 45 degree position which might disconnect all three leaves no margin for error. The L valve can connect the center port to either side port, or disconnect all three, but it cannot connect the side ports together.Multi-port ball valves with 4 ways, or more, are also commercially available, the inlet way often being orthogonal to the plane of the outlets. For special applications, such as driving air-powered motors from forward to reverse, the operation is performed by rotating a single lever four-way valve. The 4-way ball valve has two L-shaped ports in the ball that do not interconnect, sometimes referred to as an "×" port.Ball valves in sizes up to 2 inch generally come in single piece, two or three piece designs. One piece ball valves are almost always reduced bore, are relatively inexpensive and generally are throw-away. Two piece ball valves are generally slightly reduced (or standard) bore, they can be either throw-away or repairable. The 3 piece design allows for the center part of the valve containing the ball, stem & seats to be easily removed from the pipeline. This facilitates efficient cleaning of deposited sediments, replacement of seats and gland packings, polishing out of small scratches on the ball, all this without removing the pipes from the valve body. The design concept of a three piece valve is for it to be repairable.....

Steel strong trunnion mounted Ball valves are designed and tested in accordance with API SPEC Q1 and spec 6D. The complete split body & fully welded design offers maximum protection against line pressure and thermal distortion with long life and trouble-free performance.

steelstrong valves has extensive experience in manufacturing trunnion mounted, side & top entry ball valves, both soft and metal seated. size: 2” up to 56“ (dn 50 up to dn 1400) pressure rating: asme 150# to 2500# materials: carbon steels, low temperature carbon steel, martensitic steels, austenitic stainless steel, duplex stainless steels, super duplex stainless steels,alloys, nickel aluminum bronze, hastelloy, inconel, titanium alloy & carbon steel with internal corrosion resistant alloy (cra) overlay design standard: api 6d,api 608 pressure / temperature rating: asme b 16.34 test (inspection) standard: api 6d,iso 5208 api 6fa,iso 10497, api607, bs 6364 construction details: single / two / three piece design / side entry end connection: flanged,butt-weld operator / actuator: lever, gear, actuator (pneumatic, hydraulic, electro-hydraulic and electric motorised) special design feature also available: cryogenic design subsea design stem extension single & double piston seat design primary metal and secondary soft seat design emergency seat and stem sealant injection .

• Size: 300 mm
• Material: Stainless Steel
• Connector Type: Screwed
• Country of Origin: Made in India
• Pressure: High Pressure
• Way: 3 Way

Backed by a team of highly experienced professionals, we are involved in providing a wide range of ball valve.

We are offering ball valves. Our company presents an assortment of ball valves that are available at competitive prices.

• Material: Metal
• Application: Gas Fitting, Oil Fitting, Water Fitting
• Pattern: Plain
• Condition: New
• Feature: Easy Maintenance.
• Automation Grade: Manual
• Number Of Way: 2way

We are the main supplier of this product.

Mini Ball Valve, power cylinder

Bellow Sealed Valves, Lined Butterfly Valves, Check Valves

hydraulic pneumatic fittings, hydraulic pipe clamps, Hydraulic Hoses