OCELFLEX INDUSTRIES Palghar, Maharashtra

Corrugated Metal Hose manufactured using 300 Series Stainless Steel thin walled sheets, which are rolled and butt welded to form Stainless Steel Tubing. Further, the Stainless Steel Tubing is either Hydraulically formed or Mechanically formed into corrugated Stainless Steel Tubing.

Length : 100 mtrs

Single Rectangular Expansion Joints consists of a single rectangular metallic bellow welded to end connections. Normally, the expansion bellow is capable to absorb � axial, lateral and angular movements. Since it is capable of carrying all the three movements, the connected piping system must be guided so as to allow the movement to occur without causing any damage. A single rectangular expansion joint is capable of carrying more axial compression and extension, and small amounts of angular and lateral movements.

Hinged metal expansion joint is capable of greater angular movement, and with some designs, it can absorb axial movement. The angular movement is provided by use of metal hinges. So, if two such metal expansion joints are used in unison, separated by a segment of piping, the arrangement can provide greater lateral movement, similar to a Universal Metallic Expansion Joint, in a single plane application. Hinged expansion joints are usually used in sets of two or three, to absorb lateral deflection in one or more directions in a single plane piping system

Exhaust Flexible Pipe with Outer braid Designed with relatively thin single or twin ply stainless steel sheets to produce maximum flexibility with longer cycle life. It’s the most basic form of an exhaust flexible pipe, with Stainless Steel wire braid for outer protection and movement limitation to avoid deformation.

Diameter : 1.5", 1.75",2",2.25",2.5",3"

Length : 4" to 20"

Ocelflex’s metal hoses are manufactured using 300 Series Stainless Steel thin walled sheets, which are rolled and butt welded to form Stainless Steel Tubing. Further, the Stainless Steel Tubing is either Hydraulically formed or Mechanically formed into corrugated Stainless Steel Tubing. This Stainless Steel convoluted hose is close pitched with Annular Corrugations or Parallel Convolutions, for maximum flexibility.

Although these are capable of absorbing all the three movements – axial, lateral and angular, however, it is mainly designed for greater lateral movement and angular rotation which a single axial expansion joint may not be able to provide. Because of the ability to provide greater lateral movement, Universal Expansion Joints should not be confused with Double Expansion joints, in which the centre pipe or spool piece is anchored to some rigid part of the installation by means of some anchor base. Instead the spool piece of the lateral metal expansion joints is not anchored, so that it can provide lateral movement when required by the system.

Single Circular Metal Expansion Joint Expansion Bellow consists of a single circular metallic bellow welded to end connections. The expansion bellow can absorb all three movements – axial, lateral and angular. Since it is capable of carrying all the three movements, it is necessary that the piping be controlledguided as to the direction of movements required by the applications.

The automotive exhaust system runs at very high temperature and is subjected to an extremely corrosive environment. In order to resist such high temperatures and corrosive environment, at Ocelflex we manufacture the exhaust flexible connector with various types of designs applicable keeping in mind the design parameters necessary and according to your requirement and cost. Read below and select from a wide range of metal exhaust flexible connector.