Oil Pump Dealers in Dombivli, Thane

Oil Free Diaphragm Type Vacuum Pressure Pump these are 100 % oil free, where in not even a single drop of oil is used and are a boon for vacuum & pressure applications, where even slightest environment contamination through oil mist is forbidden. Also available with internal parts PTFE coated 7 complete polypropylene contact part  Features : » No Lubrication required» Practically maintenance-free» Diaphragms are made of special 2-Ply Nylon reinforced neophrene rubber» Special diaphragms available (TEFLON / VITON etc.)» Value made of SS 316 material» Pumps available with single as well as 3-phase motors» Pumps available with flame proof motor» Pumps available in 110 V AC motors Specifications : » Max. Vacuum: 650mmHg» Max. Flow Rate: 20L/min (100V,110V/60Hz), 17L/min (220V/50Hz)» Motor Rotation: 1700 RPM (110V,110V/60Hz), 1450RPM (220V/50Hz)» Horse Power: 1/8 HP» Pole: 4P» Gross Wt: 11.24lbs/5.1kg» Port Thread: 5/16"» Noise Level: ~50dB

• Application: Industrial
• Voltage: 220V
• Driven Type: Electric
• Pressure: High Pressure, Low Pressure, Medium Pressure
• Head: 2 meter
• Max Flow Rate: 1 lpm
• Model: G-m-01

Technical data  Motor single or three phase ( Normally all are taking single phase unit to avid overload problem ) Manifold block : 85 x 85 x 45 mm having relief valve inbuilt with one out let and one gauge port.we have made provision in same block for relief oil to get back in tank through pump itself. Gear Pump: 0.2/0.5 /1.0 lpm at 15 bar pressure. Tank ; 3 /5/8 lt  Oil window; standard 3 inch Suctions filter 1/4 bsp if needed following can be provided with extra cost Float switch  Pressure switch. Motor is mounted on manifold with 5x20 mm Allen screws from top end and pump is mounted with 5x45 Allen cap screws from bottom. This make assembly very easy and any one ca simply open the system to clean . assembly is mounted on tank from top by 5x20 Allen cap screws. This make unit most user friendly.   Price :  Single phase motorized pump 0.2  spm-02    Rs 7800/-  Single phase motorized pump 0.5  spm-05    Rs 7950/- Single phase motorized pump 1.0  spm- 10   Rs 8120/- Above all units are also available with three phase motor you have to specify tpm.  single phase lubrication unit   0.2/0.5 lpm      spm-0-00-05   Rs 10,800/- single phase lubrication unit   1.0 lpm            spm-0-00-10   Rs 11,800/- For float switch say f instated 0  ( spm-f-00-05) For .Pressure switch say P at 00  ( spm-0-p-10)

  Thermic Fluid Centerline Mounted High Temperature Pump     Leveraging on our sound quality control , good infrastructure and efficient workforce, we are able to serve our clients with a quality range of Thermic Fluid Centerline Mounted High Temperature Pump. Maxiumum pumping Temperature is 400 degree centigrade.This pump are offered in both water cooled and fan coolled design . It is Manufactured using high Temperature special alloy castings and is suitable for the circulation of High Temperature thermic fluid oil.This are also used for low vaccum and High Temperature distillation units. This product range is in compliance with ISO 2858 standards and finds extensive usage in textile, rubber , oil ,refinieries & chemical industries.   Thermic Fluid Centerline Mounted High Temperature Pump Series FCP - K1 ( HT) Leveraging on our sound quality control , good infrastructure and efficient workforce, we are able to serve our clients with a quality range of Thermic Fluid Centerline Mounted High Temperature Pump. Maxiumum pumping Temperature is 400 degree centigrade.This pump are offered in both water cooled and fan coolled design . It is Manufactured using high Temperature special alloy castings and is suitable for the circulation of High Temperature thermic fluid oil.This are also used for low vaccum and High Temperature distillation units. This product range is in compliance with ISO 2858 standards and finds extensive usage in textile, rubber , oil ,refinieries & chemical industries.  

oil rotary piston pump, Liquid Ring Vacuum Pumps