Paper Testing Equipments Dealers in Thane

The Tobias Paper-Chek, a hand-held device for reading paper brightness and cast, makes paper inspections at point-of-receipt quickly and accurately. Measure paper brightness, cast variation, and RGB reflectivities all on an easy-to-use meter that displays readings on a large, high-contrast LCD screen. Compare Paper-Chek brightness readings to a reference value for immediate QC decisions. Now printers can efficiently monitor paper supplies for compliance with specified tolerances, especially important in view of today's increasing use of recycled paper, paperboard and linerboard. Plainly worded, self-guiding prompts Simple directions in English appear on the display; no training necessary. Large, high-contrast display Easy-to-read LCD screen can be viewed from virtually any angle. Cordless portability Battery power allows use plantwide. Automatic shut-off Saves battery by turning off after 90 seconds of non-use. Also runs from AC/DC adapter/charger. Easy software calibration Eliminates trial-and-error screwdriver adjustments. RS-232 output port Use with a printer for reports, or a computer for analysis or data storage. 

• Brand Name: Mecmesin
• Place of Origin: United Kingdom

Adhesive strength is measured for many purposes. Some bonds are designed not to break in use (e.g. construction materials), some are designed to allow separation in normal use (e.g. a foil lid), and others are designed to be resealed a number of times (e.g. resealable bag tape). Some things peel without a separate adhesive layer, such as an induction-welded foil, or grip seal bags, and some adhesive joins for security come apart but must not reseal. Adhesive bonding can be measured by tensile testing, shear testing or compression testing, but where there is flexibility in a joined layer, a peel test is appropriate. A universal tester can be used for any peel test. It will capture high frequency data points, and produce a characteristic curve that will show the strength and evenness of the adhesion. The advantage of using a Mecmesin universal tester is that it can also be used for adhesive shear and compression tests, or coatings pull-off tests

MIT Folding Endurance Tester provides a specific load and in a angle of ±135° to fold the specimen. When achieve the specific times or specimen broken or short of electric power, this tester will auto stop and record the times. For testing the folding endurance for materials of circuit soft board, copper foil, paper etc., both sides (left and right) of folding testing angle can be set on 90~135 degree and testing speed 175 times per minute. The tester would stop automatically and record the folding times when specimen is cleavage. This tester also can open circuit to stop the machine working function by voltage loop detect. This tester is available to change folding R angle and clearance by different grip.

The endurance testing machine manufactured by h.k.machinery are of one station or multiple stations i.e. For testing one sample or multiple samples at a time. Endurance testing machine are custom build machines as per once requirements the springs manufactured are desired to have certain characteristics which are redetermined.

• Load Cell: 50 Kg with 1 grams resolution
• Cross Travel: 1000 mm
• Speed: 10 – 500 mm/min

Mechanism : Single column, System Status: Computerized + Digital, Software : AE- Embedded, Data Entry : All Data through software OR from Console, Reports : Graphical + Data through software, Units : KG; Newton; Pound; cm; mm; inch. Data Merging Facility : Available,

paper testing machine, corrugated board testing machines

Earth Bond Tester, MCB Thermal Calibration and Verification Test Bench

paper testing machines, paper testing chemicals, quantity machines

paper testing machine, top load tester, gsm tester

paper testing equipments, Pharma Testing Instruments