Peneucon Balkum, Thane, Maharashtra

SPECIFICATION Valve Size: ½” (15 mm) to 2″ (50 mm). Rating: ANSI 150. Temperature: -10°C to 180°C. Max. Pressure : 16 BAR End Connection: Screwed, Flanged, Triclover (Special on Request) Body / Bonnet : Investment Casting ASTM A 351 Gr . CF8 / CF8M. Gland Packing: Self adjusting, spring loaded Teflon packing. T rim Materials: SS 316 Seat-Seal : PTFE / Metal Seated VITON / EPDM, Buna Nitrile Characteristics: On / Off Seat Leakage : As per FCI-70-2 Class IV, V and VI Metal to Soft Seating-Bubble tight (Zero Leakage) Actuator Type : Piston Actuator Action: Direct / Reverse / Double Acting Direct acting air failure “Opens” Reverse acting air failure “Closes” Double Acting air failure “Stayput”

Volume Booster is used for faster response in opening / closing of Actuator.

valve Positioner is used for modulating application.It can be provided with either integrated or a seperate position transmitter.

The stoppers are located in the end caps and allow the valve position to set anywhere between full closed to full open position.  

3 Way Ball Valve with Rotary Actuator Three Way Ball Valve is available in either “L” Port or “T” Port. “L” Port Three Way Ball Valve is used for pipelines to switch the flow direction of two-flow lines perpendicular with each other. “T” Port Three Way Ball Valve is used for diverting, mixing or switching the flow direction. Ball passage is able to switch on three flow lines or switch on two of the three flow lines. FEATURES Four Seats for equal seat loading. Gland Packing, Seals & Spring Washers for zero leakage from gland. MOUNTING Interface: ISO 5211. Body MOC : CS, CF8, CF8M. Trim MOC : CF8, CF8M. Seat MOC : PTFE, GFT, PEEK (Special on Request). Size: 1″ (25mm) to 8″ (200mm).

Actuator Body: Extruded Aluminium Alloy body is hard anodized to protect the internal and external components against corrosion, Special Honed Internal Surface reduces the friction on moving pistons and extends the life cycle of the actuators. Alternative coatings are available such as ENP (Electroless Nickle Plating), Fiber Powder Coated, PFA, ECTFE for more aggressive environments. End Caps: Diecasted aluminum end caps are primerely Alodine Chromatized coated which provides longer life cycles against corrosion and reduces wearing resistance. Secondary standard coating is powder polyester coating and also ENP, PFA, ECTFE etc coatings are offered alternatively for agressive environments. Pistons: Diecasted aluminum twin rack pistons are equipped with slide guides and seals in high engineered plastic. Alodine Chromatized coated pistons ensure longer life cycles against corrosion and wearing resistance. Pistons that are identical on both sides allow reverse rotation simply by inverting the pistons. Travel Adjustment: Bi-directional external travel stop adjustment bolts can adjust the position ± 5° between 85° to 95° at both opening and closing directions for accurate valve allignment. 0-90° full scale limit position adjustment can also be offered optionally. Pinion (Drive Shaft): Anti Blow Out proof alloy steel pinion is electroless nickel plated in order to reduce the friction, provide maximum wear resistance and protection against corrosion under severe conditions as it fully conforms to the latest standards of ISO5211, DIN3337,NAMUR. Double square, paralel or diagonal square or key way type shaft can be supplied in accordance with customer demands. Preloaded Springs: Modular Pre Loaded Spring Cartridge design in high grade coated steel springs provide great safety and corrosion resistance in fail safe and emergency shut down operations. Also these springs can be used for both high & Low Temperature applications. Position Indicator: All actuators are equipped with regular position indicator showing the current state of the actuators and valves. Top of Actuator has a NAMUR slot to engage with all popular sensors and positioners. Bearings: Low friction Bearing & guides provide high life cycle to ensure trouble free operations and stability during operation of actuators. Seals: NBR rubber O-rings provide trouble free operation at standard temperature ranges between -20 °C to +80 °C temperature ranges. For high and low temperature applications Viton (-20 °C ~ +150 °C) and Silicone (-35 °C ~ +80 °C) seals are available optionally. Fasteners: Stainless steel fasteners for long life corrosion resistant application. Traceability: Each Individual actuator is assigned an unique identification number allowing full traceability.

PFA/FEP Lined Ball Valve with Rotary Actuator Designed and Manufactured as per ANSI B 16.34, BS 5351 Pressure Testing: API 598, API 6D End Connection: ASME B 16.1 FEATURES 2 Piece Designed Ball Valve. Body & Single piece Ball with Stem with minimum 3.5 mm thermostatic lining of PFA or FEP, universally used for highly corrosive and chemical applications. Floating Ball Seat for Bubble Tight Shut Off. Life Seats to minimize downtime and maintenance. Easily replaceable PTFE seats & Packing. Minimum 20 Kv Spark Test. MOUNTING Interface: ISO 5211. Body MOC : Ductile Iron, CF8, CF8M (LINED). Trim MOC : CF8, CF8M (LINED). Seat MOC : PTFE. Size: ½” (15mm) to 8″ (200mm).

Pneucon Butterfly Valve, with integrally moulded elastomers body sleeve are designed for longer life and trouble free performance. Integrally moulded sleeve ensures perfect resistance against friction between the disc and the sleeve. SPECIFICATION Valve Size: 1 ½” (40 mm) to 36″ (900 mm) Rating: ANSI / BS 125# / 150# Design: Centric Disc, Single to Triple Offset Disc Fully Lined & Unlined Body End Connection: Wafer, Lugged & Double Flanged Operation: Wrench / Manual Gear Port Opening: Full Seat: Nitrile /EPDM / Neoprene / Silicon / Viton etc. Disc: Solid Dual Shaft / Single Shaft Design Code : API – 609 / BS – 5155 Testing : API 598

Pneucon valves are designed and manufactured as per ASME B16.34/ API 6D/ BS EN 17292. These Standards Cover Pressure – Temperature ratings, minimum shell thickness, bore diameter for each size/class. Castings inspection as per MSS-SP 53, 54, 55, 59, 93 & 94 Actuator mounting pad on the valve is as per ISO 5211. Other applicable standards Face to Face: ASME B 16.10 Flange Dimension: ASME B 16.5 Butt Welded: ASME B 16.25 / Valve Ends: B31.3 / B31.4 / API 6D Pressure Tests : API 598 / BS EN 12266 – I / API 6D. Fire Safety: API 607 / API 6FA / BS 6755 PART II

Pneucon Limit Switch are used for open & close feed back and are certified for Weatherproof IP 67, Explosion Proof IIC,T6 & Intrinsic Safe IIC,T6.

Designed and Manufactured as per BS 5351 End Connection: ASME B 16.5 FEATURES The Valves are designed to open directly in the tank,reactor for 100% Flushing or discharging the material. Easy Operation even under high pressure. Full circular passages Easily replaceable PTFE seats & Packing. The design is featured with inclined bonnet which allows the automation OR manual operation to be free form fouling with the reactor disc end. MOUNTING Interface: ISO 5211. Body MOC : WCB,CF8,CF8M,CF3,CF3M(Special on Request). Trim MOC : CF8, CF8M,CF3,CF3M(Special on Request). Seat MOC : PTFE,GET,PEK(Special on Request). Size: ½” (15mm) to 8″ (200mm).

De Clutchable MOR is used to operate the valve manually in the event of Air Failure.

Designed and manufactured as per BS 5155, API 609, MSS SP 67 & ISO 5752 FEATURES Bi Directional zero leakage Butterfly Valve An Extremely negligible backlash between Stem & disc due to square drive. Butterfly Valves (Lined) are designed to fit without gaskets between flanges drilled to ANSI 125 #, ANSI 150#,DIN., ND 10, 16, BS 10 Table D, E and F. 100% Factory tested under Water /Air / Vacuum before the valve is Packed and shipped. 360° Disc Rotation. SPECIFICATION Valve Size: 1 ½” (40 mm) to 36″ (900 mm) Rating: ANSI / BS 125# / 150#. Design: Centric Disc, Single to Triple Offset Disc Fully Lined & Unlined Body. End Connection: Wafer, Lugged & Double Flanged. Operation: Pneumatic. Port Opening: Full. Seat: Nitrile EPDM / Neoprene / Silicon /Viton etc. Disc: Solid Dual Shaft / Single Shaft. Design Code: API – 609 / BS – 5155. Testing: API 598

Designed and Manufactured as per ANSI B 16.34, BS 5351 Pressure Testing: API 598, API 6D End Connection: ASME B 16.1 FEATURES Compact and simple construction provides ease in maintenance without disturbing insulations and piping connections. Easy Operation even under high pressures. Full circular passages. Easily replaceable PTFE seats & Packing. Prolonged successful operation even under High Pressures. MOUNTING Interface: ISO 5211. Body MOC : WCB, CF8, CF3, CF8M, CF3M (Special on Request). Trim MOC : CF8, CF3, CF8M, CF3M (Special on Request). Seat MOC : PTFE, GFT, PEEK (Special on Request). Size: ½” (15mm) to 8″ (200mm).

Air Lock is used to keep Actuator in Stay Put condition in the event of loss of Air to Actuator.