PH Meter Dealers in Charai, Thane

Laboratory meter in bench-top housing, powered with 12V power adapter. * Measures accurately - pH, redox potential (mV) and temperature. * Meter is equipped with a large, easy-to-read backlit LCD display with brightness control. * Depending on the kind of applied pH electrode it may be used for clean water, sewage,    soil measurements etc. * HOLD function to freeze the result on the display. * Signalisation of the result stabilisation “READY” with symbol and sound. * Possibility of sending to a PC a report of calibration - up to 10 last calibrations.   * Calibration of the pH electrode: 1 to 5 points. Automatic buffers detection, their value    may be changed by the user. * Automatic correction of the pH sample solution value changes, along with the    temperature changes for NIST standards. * Automatic or manual temperature compensation. * Memory of 3 electrodes’ characteristics makes changing them easy. * Automatic evaluation of the electrode’s condition.   * Precise redox potential measurement (accuracy 0.1 mV). * Possibility of automatic calculation of the redox reading in relation to the chloride / silver    electrode to the hydrogen electrode.   * Internal clock with date - Storing of the pH electrode calibration date. * Internal data-logger for up to 4000 sets of results collected in series or singly with    temperature, time and date. * The results and calibration data are stored in non-volatile memory. * USB output for a PC. * The meter meets the GLP requirements.

• Range: 0 To 14 PH
• Type of Electrode: Glass Tube type Electrode
• Process Connections: 3/8” BSP (M)
• Electrode Holder: PVC, PTFE or, SS
• Electrode Holder Mounting: ¾” BSP (M)
• Resolution: 0.1
• Max. Pressure: 6 bar
• Electrical connection: Five meters cable with BNC connector
• Approx. Length of the assembly: 120 mm
• Mounting: Panel mounted
• Display: 4 digit, 7 segment LED display
• Dimensions: 96 X 96 X 110 mm
• Relay: 1 nos. 5 A, 230 V AC (Optional)

In many of the Pharma and beverages industries, DM or, WFI water is used where pH has to be monitored. In Effluent and Sewage treatment also pH has to be maintained after its processing. We provide the glass tube type pH Electrode along with the protection housing.

• Resolution: 01 pH 0.1 mV Temp. 0.1 °C
• Calibration: Auto / Manual
• Power: Upto 100 samples
• Display: 16 x 2 alpha numeric LCD display
• Range: 0 to 14 pH 0 to + 1999.9 mV, Temp. 0 to 100°C
• Accuracy: + 0.01 pH + 1 digit mV, Temp + 0.10
• Storage: 230V + 50Hz
• Accessories: pH Electrode, Temperature probe, Electrode Stand, Buffer solution, Dust cover, Manual

pH Meter, electronic microcontroller, Rgb Controller, four digit counter

ph electrodes, Auto Conductivity Meter, Laminar Flow Bench, Water Still