PID Controllers Dealers in Thane

• Country of Origin: India
• Feature: Heat Resistance, Stable Performance
• Voltage: 220V
• Display Type: Digital
• Theory: Bimetal Thermometer, Temperature Controller
• Frequency: 60Hz
• Current Type: AC, DC

• Input: ONE UNIVERSAL Input Thermocouples : J,K,T,R,S RTD's : PT-100, PT-1000 DC mA : 0 – 20 mA, 4 – 20 mA (Maximum 12 Volts) DC mV : ± 50 mV, ± 100 mV, ± 200 mV, ± 250 mV DC Volts : ± 1V, ± 3.3V, ± 5V, ± 10V
• Range: Refer 'table A''
• Ambient: Compensation automatic, ambient 0-60°C
• Resolution: 1 or 0.1 or .01 or .001 programmable
• Display: Super bright in 4 + 4 format , with NO BLINK programming technique Upper 4 digits 0.5" red colour Lower 4 digits 0.39" green colour
• Ananciation L.E.D's: 7 L.E.D.'s , 3 mm , multi colour, 3 for O/P's, 1 each for A/M, Alarm, Profile, Soak Time
• Parameter Setting: By soft touch, Elegant, Sturdy membrane keys & User friendly menu driven software
• Outputs: THREE, Programmable outputs with modular attachments Relay module SSR module 4-20 mA module Retransmission module
• Note: Output modules are predefined All three outputs can be assigned as relay or SSR or 4-20 mA, this means at a time either 3 relays or 3 SSR's or 3 4-20 mAs outputs also available
• INPUT Control Outputs Rating: Relay SPST 230V / 3 Amp, 12 volts DC pulses for , 4-20 mA (Load 450 ohms)
• CONTROLS:  
• Control Action: PID / On-OFF / TP PID P = Propotional Band = 1.0 to 999.9 units adjustable I = Integral = 0 to 3600 ( 0-1200) seconds adjustable D = Derivative = 0 to 500 seconds adjustable CT = Cycle Time = 0.5 to100 seconds adjustable On-OFF Hys
• Control Action Assign: PID for O/P 1 and O/P 2 ON-OFF for O/P 1, O/P 2 , O/P 3 T/P for O/P 1, O/P 2 , O/P 3
• Control Modes: Heat / Cool / Heat-Cool
• Overshoot Control: Provided
• Soak Timer: Assigned for O/P 2 or O/P 3, Soak Timer programmable (HH-MM or MM-SEC) Set Point Start up or Power on start up
• Manual Output: Provided, 0 to 100%
• ALARMS: Assigned for O/P2 and O/P3 Alarm Types : Low / High /Band /Deviation / End of Profile Alarm Acknowledge : Latchable / Unlatchable Alarm Inhibit : Available
• Retransmission: 4-20 mA or 20-4 mA or 0-20 mA or 20-0 mA programmable, Non-isolated, Retransmission assign for O/P 2 and O/P 3 Provided on request
• Communication: RS485, 2-Wire, Half duplex RS485 MODBUS on request, MODBUS RTU or ASCII Baud Rate Programmable 1200/2400/4800/9600, contact factory for higher Baud Rates
• PROFILER: 2 Profile Programmes / 8 Segments Each Each segment programmable for either RAMP or SOAK Profiler can be configured as : - RAMP/SOAK - RAMP/RAMP - SOAK/SOAK - SOAK/COOL Soak Time programmable in HH-MM , MM-SEC Overshoot control during

Pid Temperature Controller, Liquid Level Controller, Level Sensor

pid controllers, Flow Nozzle, pH Meter, Industrial Stirrer, Water Bath

single loop pid controllers, Panel Pc, Industrial Pc

PID CONTROLLER, universal temperature controller, Temperature Controller

pid controllers, Data Loggers, directory listing services, Level Switches