Plastic Rods Dealers in Thane

• Color: White
• Material: Nylon
• Shape: Round
• Features: High strength, Durable, Sturdy construction, Lightweight, Accurate dimension, Elegant design

• Length: 2000 mm
• Tolerance: 5 mm
• Tensile strenght : ≥ 14.0  Mpa
• Ultimate elongation : ≥ 140 %
• Density : 2.1

• Country of Origin: India
• Size: All Size Available
• Color: White
• Shape: Round
• Material: PVDF
• Application: Chemical Industry

We make sure that the products that we deliver will remain completely damage free as we make use of the quality packaging material and have skilled personnel for the packing of the products. The range we offer to the customers are stringently packed and delivered as per the customers' requirement and convenience.   Approx. Price : Rs 50 / each   Product Details : Brand - As per Requriment Size/Diameter -1/2 inch Single Piece Length - 3 meter Application - As per Requriment

• Material: Polypropylene
• Length: 25 m
• Color: Grey
• Country of Origin: Made in India
• Size: 3 mm
• Packaging Type: Roll

• Feature: Low Density, High Strenght to weight ratio, Excellent chemical and corrosion resistance, Excellent Vacuum thermoforming properties.
• Length: 1500x10mtr, 2000x10mtr

• Density: 0.025 - 0.30 gm./ M.3
• Water absorption: 0.01 gm./cm.2
• Temperature range: -300C to 600C
• Elongation: 20 to 50%

Polyethylene foam rods provide backup to sealants, impart shape & optimize the sealant quantity. By using round section EPE rods, the side adhesion surface area of sealant is increased by approximately 30%, there by giving higher elongation at break.

• Country of Origin: Made in India
• Color: Ivory (Cream)
• Material: ABS
• Brand Name: Polestar Polymers
• Diameter: 25 mm
• Length: Upto 1000 mm
• Specific Gravity: 1.05 g/cm3
• Tensile yield strength: 50 Mpa
• Breaking elongation: 40 %
• Bending strength: 60 Mpa
• Flexural modulus: 1800 Mpa
• Shore hardness: 80 D
• Impact strength: 200 J/M
• Heat distortion temperature: 80 deg C
• Operating temperature: 75 deg C
• Maximum Operating temperature: 100 deg C
• Thermal conductivity: 0.17 W/(K-M)
• Coefficient of linear thermal expansion: 9 10-5-1/K
• Dielectric strength: 22 KV-mm
• Volume resistivity: 10 ohm cm
• Surface resistivity: 10 ohm
• Dielectric constant: 3.3
• Water absorption: 0.4 %
• Coefficient of friction: 0.5
• Shape: Cylindrical

Garflon Nylon Rods, Bushes and Machinery parts are characterized by a combination of high strength, toughness and abrasion resistances. Garflon  products replace metals in various engineering applications on account of their outstanding characteristics as:- Reduction in weight- Self lubricating - Economy- Shock Resistance- Improved Dimensional Stability- Vibration damping performance- Excellent chemical resistance- High wear and abrasion Resistance- Noise reduction- High tensile and compressive strength - Machining   APPLICATIONS Some commercial application of Garflon can be given industry wise, as under:ENGINEERING:Gears, cams, sprockets, nushes, bearings, gaskets, pulleys, liners.TEXTILELoom pivot bearings, gears for loo and knitting machines, shuttles, rollers, cams and cam followers.METALBearing, bearing cages, slipper pads, geras, bushes, wear strips, rollers, eccentric rollers, wobble box inserts.MATERIAL HANDLING EQUIPMENTSCranes / Fork / lifts / Conveyors, RopewaysAUTOMOBILEWear rings, pads, swivel bushes, throttle linkages, bushes, and Shackle pin bushes.MARINEBushes, gears, rings, trunnion bearings, rollers and roller bearings, stern tubes.PAPER / SUGAR MILLGears, bushes, pulleys, rollers, bearings.BOTTLING & FOOD PROCESSINGStar wheels, scrolls, guides, cams, cam followers, rollers, timing screws.RAILWAYSBushes, wear plates.CHEMICALBalls, gaskets, liners, nuts and bolts.Garflon Nylon Tubings

• Length: 450mm
• Material: HDPE
• Color: Black
• Application: Mechanical Workshop
• Shape: Round
• Country of Origin: Made in India
• Size: 2mm

TEFLON Teflon Rods & Teflon Sheets (Virgin Grade) exhibit astonishing chemical resistance and ultra high-purity. Self-lubricating and with a low friction coefficient, Teflon PTFE (polytetrafluoroethylene) sheets and rods are ideally suited for the manufacture of high-temperature seals, insulators and bearings used in semiconductor, aerospace & chemical processing industries.   Features and benefits :   Lowest coefficient of friction of any known material.   Teflon PTFE operates up to 500F.   Tremendous chemical resistance.   Teflon is an excellent insulator.   Limitations: low compressive & tensile strength.   Masaf Engg trades in following Teflon products :   PTFE RODS UPTO 300 MM   BUSH : 100 MM LENGTH   SHEETS : 300 X 300, 450 X 450 , 600 X 600. 1000 X 1000, 1000 X 2000   SKIVED : 300, 450, 600, 1000, 1200, 1500, 2000   TAPE : CHAMPION, SPITMAN, UNIVERSAL ROPE, STYLE – 3, STYLE – 36, STYLE – 38, STYLE 1094   PTFR PURE WHITE TEFLON PACKING   TEFLON GLAND, TEFLON ASBESTOS GLAND   TEFLON WASHERS   TEFLON GEARS AND TEFLON PRODUCTS   WE ASLO DEVELOP TEFLON PRODUCTS AS PER CUSTOMERS SIZE AND DIMENSIONS   TEFLON PIPES   NYLON   Nylon is one of the most widely used engineering thermoplastics. It offers an excellent combination of mechanical performance and cost. There are many nylon grades available today, the most common being nylon 6/6 and nylon 6. The properties of both nylon products are very similar; and typically, they can be used interchangeably. However, there are some advantages and limitations to each material both nylon 6/6 and nylon 6.   Masaf Engg trades in following Nylon products :   RODS : UPTO 300 TO 1000 MM LONG   SHEETS : UPTO 50 MM THICK   BUSH : UPTO 1000 MM LONG   SQUARE BARS : UPTO 1000 MM LONG   NYLON GEARS   NYLON PIPES   WE ASLO DEVELOP NYLON ANY PRODUCTS AS PER CUSTOMERS SIZE AND DIMENSIONS.

• Length: 2mtr
• Diameter: 3mm to 250mm

The company is the foremost PTFE Rods Manufacturer and Supplier in Thane (India). The PTFE Rods, offered by us, are made up of the finest PTFE. The PTFE Rods are available in a comprehensive array, which is high in demand across the country. Our PTFE Rods are provided at the market leading prices. Availability Of PTFE Rods : In different dimensions

• Type: Plastic Welding Rod
• Material: ABS, Plastic, PP, PVC
• Shape: Round
• Thickness: 0.5-1mm, 1.5-2mm, 2.5-3mm, 3.5-4mm, 4.5-5mm, 5.5-6mm, 6.5-7mm, 7.5-8mm, 8.5-9mm, 9.5-10mm
• Length: 100-200mm, 200-300mm, 300-400mm, 400-500mm, 500-600mm, 600-700mm, 700-800mm, 800-900mm, 900-1000mm
• Application: Welding Purpose
• Color: Black, Green, Grey, Red, White, Yellow
• Power Source: Electric
• Feature: Crack Resistance, Fine Finished, High Performance, Premium Quality, Tensile Strength, Easy To Fit

We are the main supplier of this product.

Cast Nylon Rods, Cast Iron Roll, Cast Iron Fittings

EPE Foam Rods, Chemically Cross linked PE Foam, Sun Pack PP Sheets

Cast Nylon Rods, nylon plate

Ptfe Round Rod, Pneumatic Pumps, Pneumatic Tools, Pumps, pumping equipment

PTFE Teflon Peek Rods, Glass Filled PTFE Mechanical Seals, Rubber Tube

Peek Rod, PEEK Tube, direct selling service

Ptfe Teflon Rod

Polyurethane Rods, wheels castor, Trolleys, Pallet Truck

Pu Rod, aluminium ball cage, Tunnel Gate, Dies and Mould Polishing

teflon rods, DAS Seals, nylon wheel, PU Seals, bakelite components

pvdf rod, Peek Bushing, ptfe valve seat, Peek Union, polyimide tube

cast polyurethane rod, Finishing machine, Industrial Equipment, corncob

Polyacetal Rods, Delrin - Polyacetal Sheets

Epoxy rod, Fibre Polyster Sheet, Fiber Insulators, Fiberglass Epoxy Pipe