Process Pumps Dealers in Wagle Estate, Thane

• Brand Name: SUTECH PUMPS
• Material: PP
• Application: LIQUID TRANSFER
• Power: 4 BAR
• Pressure: 4 BAR
• FLOW RATE IN LPM: 25
• MAX HEAD IN METER: 30
• OUTLET AND INLET SIZE: 1/2 INCH

max flow rate :      23lpm (6gpm)port size :     inlet: 12.70mm (1/2" bsp)discharge: 12.70mm (1/2" bsp)air inlet: 6.35mm (1/4" bsp)air exhaust: 12.70mm (1/2" bsp)suction lift : dry: 1.45m (4.75') wet: 2.83m (9.28')teflon : dry: 0.05m (1.64') wet: 0.90m (2.95')max particle size (dia) : 2mm (0.078").

• Type: Coolant Pumps
• Application: Agrictulture, Waste Water
• Weight: 10-20kg, 20-300kg, 30-40kg, 40-50kg
• Condition: New, Used
• Automatic Grade: Manual, Semi Automatic
• Power: 10hp, 1hp, 2hp, 3hp, 5hp, 7hp
• Pressure: High Pressure, Low Pressure, Medium Pressure
• Warranty: 1year, 2years
• Driven: Electric

• Type: Coolant Pumps
• Application: Agrictulture, Waste Water
• Weight: 10-20kg, 20-300kg, 30-40kg, 40-50kg
• Condition: New, Used
• Automatic Grade: Manual, Semi Automatic
• Power: 10hp, 1hp, 2hp, 3hp, 5hp, 7hp
• Pressure: High Pressure, Low Pressure, Medium Pressure
• Warranty: 1year, 2years
• Driven: Electric

• Brand Name: CNP
• Head: 100 LPM
• Frequency: 50/60 Hz
• Material: Cast Iron
• Feature: Semi-open impeller, Robust construction, Complete non-clog operation, Superior heat dissipation,Built-in motor protection
• Liquid temperature: 5 to 40 degree
• Spherical clearance: Upto 100 MM

• Liquid Temperature: -20"C
• Flow Range (Q): 3.0-200.0 M3/hr
• Delivery Head: Max. 7.0 Bar
• Speed (n): 2900rpm or 3500rpm
• Power (P): up to 37kw
• MOC: SS-304 & SS-316

Applications Water supply Industrial liquid transfer Water treatment, filtration Slightly corrosive chemical transfer Standard material All the parts contact with liquid made of 304 stainless steel. Mechanical seal are standard supply. Description: Light weight & sturdy structure Energy efficient. Pump design according to DIN24255, All the parts contact with liquid made of stainless steel with high efficiency. Standard TEFC IEC B35 motor driven, single phase up to 2.2kw. Max. Working pressure 10 bar.

• Type: Dewatering Pump
• Color: MUlticolor
• Voltage: 110V, 220V, 380V, 440V
• Power: 1-3kw, 3-5kw, 5-7kw, 7-9kw, 9-12kw
• Pressure: High Pressure, Low Pressure, Medium Pressure
• Application: Agriculture, Industrial, Submersible
• Fuel: Electric
• Automatic Grade: Automatic, Fully Automatic, Manual, Semi Automatic
• Warrenty: 1 Year, 2 Years

We offer Laboratory Models Liquid Ring Vacuum Pumps. HTC Liquid Ring Vacuum Pumps are positive displacement pumps of simple and robust monoblock direct driven design. HTC offer these small, compact, single stage liquid ring vacuum pumps of this design have the following important features: HTC Pumps are supplied ready for connection. Installation of separate motors and bed plates is eliminated. Compact design ensures that a minimum of space is requires. Pumps require a minimum of maintenance. Low noise and vibration levels. Virtually isothermal compression. Can be used for dry gases or for vapors. Limited quantities of liquid can be handled in addition to the gas or vapor being pumped. Service liquids other than water can be used. Thus, the service liquid can be chosen so that it is compatible with the process gas or vapor.

• properties: Resistance to most chemicals and solvents

The thick walls casing liner and back plate is of Poly Vinyli Dene fluoride [PVDF] Casing liner is covered in a standard shell of cast iron. Casing Liner and Back Plate are solid injection molded in our factory at Valsad. The impeller provided is semi-open type. A large metal insert in the PVDF impeller greatly increases its mechanical strength and provided long life of service. Bearing Pedestal includes a rigid shaft of high strength Stainless Steel EN-8 EN-19EN-24EN-41 and a double row ball bearing with extremely high load capacity. Envelope gasket provided is of Poly Tetra Fluoro Ethylene [PTFE] with EPDM rubber insert to ensure maximum sealing.

chemical process central pumps, TRISHEAR COLLOID MILL, Sewage Pumps