Resistors Dealers in Thane

We are instrumental in offering wire wound resisters to our clients. Wire wound resisters in compliance with international quality standards, we employ nickel-chrome and copper nickel alloy wires at our modern machining facility to design these products. Our wire wound resistance is replete with numerous quality features such as flawless finish, compact design and rugged construction. We lay prime emphasis on the packaging of these products to ensure safe and secure delivery.

• Brand Name: Linepro Controls
• Country of Origin: Made in India
• Usage/Application: Electrical Industry
• Part Number: LP 3981

• Type: Force Sensing Resistor
• Brand Name: Linepro Controls Pvt Ltd
• Shape: Circular Shape FSR
• Certification: ISO 9001:2015
• Weight: Light Weight
• Voltage: 5 VDC
• Country of Origin: India

Force sensing resistor is highly sensitive to resistance when applied pressure. The more the pressure applied, the lower is the resistance.Force sensing resistors are produced through printing technology so are very thin and flexible. Hence it is also called a flexible printed sensor or printed pressure sensor.It can be customized easily with any shape and size. Device details:  Input  - Applied force Output  - Resistance as per applied force Voltage - 5 VDC Current - in mA Thickness - 0.6mm Response time - 10 ms Applications: Robotic Finger Tip Floor security Panel Motor Speed Control Seat Occupy Detection Interactive Dance Floor Musical Toy Instrument Hand Grip Monitor

Shunts should be mounted with manganin resistive blades in a vertical position in order to promote the free convectional Ow of air. If vertical mounting is not practical, forced air cooling or adding heat sinks to the blocks can reduce the operating temperature. The manganin blades must never exceed +145°C, otherwise permanent resistance change may occur. When current of 100A or greater is passing through the shunt, the major portion of heat generated is dis­sipated by conduction through the shunt terminal blocks into the connecting buss bar or cable. Therefore it is necessary to insure that good contact is made between the shunt terminal blocks and the conductor terminals and that the conductors have adequate cross section to keep the temperature of the shunt from exceeding 145°C ( 125°C recommended ). If the shunt is mounted in an enclosure, care must be taken to ensure adequate cooling. If the power density is greater than 1/4 watt per square inch of the enclosure surface for all enclosed devices, additional cooling must be supplied in the form of air vents or fans. Shunts also must be installed in a way that protects them from thermal expansion forces produced from buss bar or short-circuit forces. Flexible wiring may be required in high pulse current, high vibration, or high temperature applications. Where possible, all shunts should be mounted on the ground side of the circuit. For circuits above 750VDC, RS shunts must be mounted on the ground side due to the dielectric strength of the shunt base. Applications : Solar Generators, Wind Power, Heavy Industry, Welding, Electroplating, Battery Chargers, etc. Features : • High Precision: ± 0.25%, 0.1%, 1%, 5%• Current Range: 1A to 1200A

• Brand Name: Sure
• Model No.: SSS
• Power Rating: 5 to 20W
• Resistance: 0.001 ohm to 200 kilo-ohm
• Tolerance: +-1%, +-2%, +-3%, 5%
• Minimum Order Quantity: 500 Piece

Features Selected superior quality material. Automated mass scale production. Superior electrical performance. Heat & wet proof epoxy coating. Color band marking for easy identification. Packed to customer requirement. Low prices, faster deliveries. RoHS complient part, lead free. Applications Consumer industry Electronics. Telecommunication. Automobile Electronics. Power Electronics. Medical Electronics. Computers.  

• Resistance tolerances: ± 0.01%
• Low TCR: 20ppm/K standard
• power ratings: MIL-R-26/ MIL-R-39007
• Resistances: 0.02 to 260kOhms
• Temperature range: -55°C to +350°C ( "V" Rating )
• Power: 0.1 to 13watts

• Features: Smooth performance , Longer operational life ,Require less maintenance ,High load bearing capacity ,Longer serviceability
• Item Code: IP-20
• Resistance: 1000 Mohms at 500V

We are offering thin film precision chip resistor. Which has long side terminations with higher power rating. These resistors are widely used for over current protection in audio applications. Our resistors are also suitable for power management applications. For high power alumina substrate, high purity alumina substrates are used. specifications: 3 watts power rating in 1 watt size, 1225 package low tcr of ±100 ppm/°c resistance values from 1m to 1 ohm applications: dc-dc converter, battery pack, charger, adapter, switching power supply voltage regulation module (vrm) automotive engine control disk driver portable devices (pda and cell phone)

• Usage: Industrial
• Type: Motor Starting Resistor
• Condition: Used

fixed resistors, Stainless Steel Spider Fittings

Resistors, Potentiometers, Ac Drives, dc generators, Battery Chargers

Resistors

SLA - Load Resistor, SRH -Rheostat, SCA - Axial Lead