sai ganesh enterprises Kolbad, Thane, Maharashtra

The paddle type SPDT WFS series are designed to provide excellent performance where accuracy, reliability, and rugged construction are required used in liquid flow lines carrying water or any fluid neither harmful to brass and prosphor bronze nor classified as a hazardous fluids. They can be wired to close one circuit and open a second circuit when liquid flow either exceeds or drops below the adjusted flow rate. The WFS series are recommended for liquid pressure and temperature as mentioned below and must not be used on lines carrying liquids below 0°C. These series may be used on liquids with high salt or chlorine content but is not for use in hazardous atmospheres. They may be also used outdoors but must be protected from weather or splashing water.

Catering to the requirements of power and allied industry, we offer a quality array of Stainless Steel Pressure Gauges. Renowned for offering resistance in corrosive environments and modes, these find wide application in power generation, pollution control equipment, chemical & petrochemicals and oil exploration.

The CDD4 Series CO2 transmitter uses a highly accurate and reliable Non-dispersive Infrared (NDIR) with state-of-the-art digital linearization and temperature compensated circuitry in an attractive, low profile enclosure for room applications and a duct mount version to detect CO2 levels and provides a linear analog signal output of 4-20 mA, 0-5 or 0-10 Vdc signals. An optional LCD display is available that is fully programmable to show only the parameters required. Various precision thermistors or RTD’s are also available to as an optional output.

CMD: Environmental, industrial and commercial Carbon Monoxide (CO) gas detector. To sense and transmit to any compatible electronic analog control, DDCPLC controller or automation system for the control of ventilation equipment.

The RP series Room Pressure Monitor is used to measure differential pressure in the range of 0.125 to 1” wc or 30 to 250 Pa. It combines precision high sensitivity silicon sensing capabilities and the latest ASIC technology to substantially reduce offset errors due to changes in temperature, stability to warm up, long term instability and position sensitivity. It features a LCD to display the pressure value, several

These products are designed for measuring outside-air RH. They feature a gasketed, weather-proof ABS enclosure designed to resist the elements for years of trouble-free operation and include an integral sun-shield and potted sensor assembly. Industrial rated electronics and extended temperature compensation allow for accurate measurements in all conditions. Some models are available with various temperature sensors or temperature transmitter outputs options.

BrassCast Iron Body Material, Full Bore Design, Connections: Screwed, Flanged End, Types: Ball Valve, Butterfly Valve, Balancing Valve, Air Vent Valve, Y Strainer, NRV.

The WPG-G-PS3 pressure switch is a cost effective pressure monitoring solution for liquids and non aggressive gases. The compact design and rugged construction makes the WPS-G suitable for monitoring pumps, valves, etc. The unit has an adjustable setpoint with adjustable differential and comes complete with a dial to show the liquid pressure The WPG-D-FD113 differential pressure switch is a low cost effective pressure monitoring solutionfor liquids and non-aggresive gases. The unit is designed for both flow proving and flow failure detection to cover the range of 0.3 to 4.5 Bar (4.35 to 65.25 Psi). Approximate setpoint can be viewed on the dial at the front of the unit.

This standalone micro-controller based LCD temperature controller provides proportional plus integral (P+I) and onoff temperature control for commercial Heating, Ventilating & Air Conditioning System such as Hydronic Heating, Air Handling Unit, Heat Exchanger or Condensing Tower. This controller has a modulating analog 2 to 10Vdc or 4 to 20mA output and a 2A onoff output to realize various optional control functions including coolheat changeover, heatcool sequence control, emergency interlocking and auto-alarming control. The DC1000 family of microprocessor based controllers combine a high degree of functionality and reliability at a very low price. Available in 4 different formats : 116 DIN, 18DIN, 316 DIN, 14 DIN. These controllers are ideal for regulating temperature in a variety of applications, including:

Available with a wide variety of thermistors or RTD or with a transmitter to provide an analog output. They come in two configurations, either a spring loaded or non-spring loaded probe and has a 12” NPT fitting to be mounted into a thermowell. It is available in various lengths and enclosures styles. A LCD is available on specific models.

These are available in multiple enclosure styles with optional features such as set point adjustment, manual override and LCD display. Different accuracy models are available to best suit the applications and standard analog outputs. Combination products are also available which can also include temperature and CO2 outputs.

Humidity range : 0-100%

We manufacture an extensive range of different types Temperature Sensor. These are designed and developed as per the international industry standards by our team of experienced professionals. Available in different size to match the client's requirements and widely demanded in various applications. We have made these accessible at highly competitive prices for our valued customers. We are the prominent manufacturer, exporter and supplier of Temperature Sensor. The offered temperature sensors are precisely manufactured using supreme quality raw material and innovative technology in compliance with international quality norms. Our quality controller rigorously tested these temperature sensors on various quality parameters in order to deliver defect free product. Additionally, we offer these temperature sensors in various technical specifications at economical.

These products feature a 9 inch (230 mm) stainless steel probe with an integral 60 micron porous filter to protect the sensor and are available with several standard or weatherproof enclosures to meet most HVAC applications. Some models are available with various temperature sensors or temperature transmitter outputs options.

The WPG-G-PS3 pressure switch is a cost effective pressure monitoring solution for liquids and non aggressive gases. The compact design and rugged construction makes the WPS-G suitable for monitoring pumps, valves, etc. The unit has an adjustable setpoint with adjustable differential and comes complete with a dial to show the liquid pressure The WPG-D-FD113 differential pressure switch is a low cost effective pressure monitoring solutionfor liquids and non-aggresive gases. The unit is designed for both flow proving and flow failure detection to cover the range of 0.3 to 4.5 Bar (4.35 to 65.25 Psi). Approximate setpoint can be viewed on the dial at the front of the unit. WPS-G-PS3 - Liquid Static Pressure Switch. WPS-D-FD113 - Liquid Differential Pressure Switch.

IFM Inductive sensors , IFM Capacitive sensors, IFM Magnetic sensors ,IFM Cylinder sensors ,IFM Fibre optic sensors, IFM Ultrasonic sensors ,IFM Feedback systems for valves and valve actuators,IFM Photoelectric sensors,IFM Laser sensors and IFM distance measurement sensors.

Ultrasonic technology (no mechanical moving parts), Accuracy class 2 acc. EN 1434, Manufacturer approval H1 acc. MID (European Measurement Instrument Directive), Energy meter consist of flow part, calculator and temperature sensor, The energy meter shall be calibrated as one unit acc. EN1434, flow sensor for cooling application in IP65 (protected US sensors), max flow rate shall be 2x nominal flow rate (permanent).

We are one of the reputed manufacturers of Bimetallic Temperature Gauge that finds wide application in food and beverage industries. Highly reliable the rugged bimetal helix is properly heated and coated with viscous silicon to improve temperature transmission and minimize pointer oscillation.

The air pressure switch is a general purpose airflow proving switch designed for HVAC and Energy Management applications. It may be used to sense positive, negative, or differential air pressure. The housing contains a diaphragm, a calibration knob and a snap-acting SPDT switch. The 2 sample connections located on each side of the diaphragm accept 6.35mm(0.25")OD tubing An enclosure cover guards against accidental contact with the live switch terminal screws and the set point adjusting knob.The enclosure cover will accept a 12.7 mm (0.5") conduit connection or M20 connection.An enclosure cover guards against accidental contact with the live switch terminal screws and the set point adjusting knob.

ESF-35-2: ESF is an airflow transducer with a broad application area. It can be used for control, surveillance, and regulation of the flow rate in fresh-air and ventilation systems, etc.

The airflow transducer ESF-35-2 is installed in such a way that the current of air passes through the gap of the sensor head. Conductors to and from the transducer should be kept isolated from high-power conductors where powerful transient voltage spikes may appear. The ESF-35-2 transducer registers the airflow speed according to a thermal principle based on the fact that the cooling action of air increases with airspeed. The action is measured and converted to a 4 - 20mA or a 0 - 10 V signal corresponding to airflow speeds from 0 - 8 ms (0 - 1575 ftmin) or 0 - 16 ms (0 - 3150 ftmin).