STP & ETP Equipments Dealers in Thane

• Material: Metal
• Feature: Accuracy, Durable
• Warranty: 1Year
• Gas Type: Chlorine Gas
• Body Surface: Polished

The blower shall suck the leaked chlorine gas along with air and deliver the same to the Absorption Tower. The Pump shall pump the 20% caustic solution to the top of the Tower. The caustic flows down through the Pall Ring dumped packing. The chlorine gas that flows up, meets the caustic counter-currently in the packing area. Chlorine is absorbed in this process.

• CERTIFICATIN: CE CERTIFIED
• METERINGTUBE: S.S 304
• ELECTRODE: S.S 316
• FLANGE: C.S.
• LINING: PTFE
• END CONNECTION: ASA150#Flanged as per B 16.5.
• MOUNTING: Inline
• ACCURACY: +/-0.5% of Actual Flow Rate (+/- 0.3%, +/-0.2% on request)
• REPEATABILITY: +/- 0.2% F.S
• MIN CONDUCTIVITY: 10 uS/cm
• MAX PROCESS TEMP.: 0-60 deg C Normally ( Higher Temperature Available)
• PRESSURERATING: 10 Bar ( Higher Pressuer Available)
• MAINSPOWER: 230 V AC 50Hz / 24 V DC
• ENCLOSURE M.O.C.: Cast Aluminum IP65Signal Amplifier Box
• CABLE ENTRY: PG-9 / PG-11
• FLOW UNIT: Selectable.
• EMPTY PIPEDETECTION: Available
• LOW CUTTOFF: Available
• OUTPUT: 4 – 20 Ma
• COMMUNICATION: RS 485 MODBUS
• DIRECTION: Suitable for Bi- Directional
• PROGRAMMING: Through Key/ Keypad on front facia.
• TERMINALS: Shock – Hazard – Protected screwless terminals.
• SIGNAL CONVERTOR: Integral / Remote (with 3 meterCable)
• INTERCHANGE ABILITY: Fully interchangeable with all sizes of flow sensors.
• POWERFAILURE MODE: Provision of RAM/PROM to store parameter entered and measured flow dataduring

We are offering oil skimmers. Tramp oils and other hydrocarbon contaminants have a lower specific gravity than water. This causes the tramp oils to float on the surface of the aqueous solution or coolant. Udly engineers design oil skimmer provides an effective means for removing tramp oil from process liquid surfaces in either a single or dual tube mode.

• Material: Cast Iron

Dispersing, Suspending, Emulsifying & Homogenizing Technik for Liquid and PasteApplication & Process : At IPSONS, We design and manufacture a wide range of agitators for liquids and Paste for all process in the pharmaceutical, chemical, food, cosmetics and similar industries. Agitators are provided with different types of agitation components for process such as mixing, blending, dissolution, dispersion, homogenization, reaction, fermentation, oxidation, digestion and emulsification of liquid, paste, ointment, solution, viscous material and solid-liquid. Agitators are designed and adapted to any vessel shape and can be implemented with or without lower support. Different types of blades can be combined depending on the process requirements. The sealing system are designed and adapted depending on the requirement of the various process and start from simple retainers to double mechanical seals. Agitators are available with different type of mounting as per suitability of the process and users requirements. Different types of blades can be combined depending on the process requirements and various conditions including the stirring objective, tank shape, rotating speed, viscosity, mixing blades of different configurations should be applied for different operating objectives. Different mixing blades follow various specifications to design and select the configurations of the blades. The ratio of the blade to the inner diameter of the tank, angular speed of the blade top, viscosity change during mixing process and the range of the flow volume are the factors to be considered. There are various types of blade mixer and can be categorized into axial flow and radial flow according to the flow pattern of the fluid in the tank. The main factors affecting mixing performance are as below and the commonly used configurations are listed for reference: Shape, diameter, sweep back angle and slant angle of the mixer blade Number of layers and the vertical position of the mixer blade where it is installed Rotating speed of the mixer blade Shape, inner volume, number of baffles and outline dimensions of the mixing tank Batch operation or continuous operations.

We design manufacture and export all types of water and waste water treatment equipment. They include reverse osmosis, ultrafiltration, nano filtration as well as waste water treatment equipment such as clarifiers thickeners aerators etc

Flash mixer: in water and waste water treatment process, after screening out the debris and preliminary analysis of raw water, water treatment process commences at the flash mixer chamber. Flash mixer enables creation of conditions conducive efficient and effective treatment of water. It facilitates rapid and uniform dispersion of primary treatment chemicals (e.g. Coagulant chemicals) in the water, before it is discharged in to the flocculation basin. flash mixing usually occurs in a small basin immediately preceding or at the head of the coagulation basin. Avighna claritec™ manufactures flash mixer by implementing modern technologies and designs in order to satisfy the ever changing demands of industries. features of flash mixer: • specifically designed and fabricated as per the requirement of the process being implemented or technical specifications provided by our clients. • our entire range of flash mixer is designed and fabricated with precision to assure high operation efficiency at minimal initial and running expenses. • we also operate to provide flash mixer according to the technical specifications detailed by our clients.

• Color: White
• Country of Origin: Made In India
• Size: 18.5
• MOC: Cotton, Polyester and more
• Micron: 1 to 50

We have a large sewing factory on our premises to make any type of filter bag, Filter Press Cloths or Filter Media, to your specifications. Applications include liquid, air or gas. Our deliveries are always within a few days since we stock many of the textiles required for these applications. With having an in-house sewing department, this allows us to ship smaller orders in 1 day. We keep part of our plant available to handle these orders from start to finish.  This includes laying out the fabric, cutting the bags from patterns, sewing and shipping the finished product.  By having trained people in this area to “do the whole job”, we can avoid the production line requirement that large orders face. This enables us to make and ship all of our smaller to medium size bag orders the day they are received or very soon afterward.   Additional Information: Production Capacity: 800

• Application: Wastewater Treatment
• Feature: Durable, Heat Resistance
• Voltage: 220V
• Automatic Grade: Automatic
• Power: 1-2kw
• Driven Type: Electric
• Warranty: 1year

• Material: Stainless Steel
• Finishing: Polished
• Condition: New
• Power Source: Electric
• Automation Grade: Automatic, Semi Automatic
• Application: Liquid Mixing
• Certification: ISO 9001:2008
• Feature: Long Working Life, Low Maintenance
• Voltage: 440 V
• Type: Industrial Stirrer
• Weight: 6-8 Kg
• Phase: Single Phase, Three Phase
• Warranty: 1 Yr
• Country of Origin: India

• Country of Origin: Made in India
• Automation Grade: Semi-Automatic
• Design Type: Standard, Customised
• I Deal In: New Only

We are one of the distinguished Manufacturers and Suppliers of Industrial Oil Skimmers in India. Our Oil Skimmers are used in leading Oil companies of India. They are used to separate oil from the surface of the liquid solvents. The Floating Weir Oil Skimmers are efficiently designed to offer the purpose of their work in the best manner. Easy to operate and maintain, our Oil Skimmers are cost effective that is an added advantage. We ensure quick delivery and safe handling of the Oil Skimmers in due time. We also render unmatched after sales service to the clients.

• High: 20

  This type of machine consist of a motor of reputed make.All contact parts will comprise of S.S 304 material. It will have a protecting cage with two 20 mm bar  held apart by closing flat ring clamping on to the bar. The shaft will be coupled directly to the motor shaft. An extra bearing on the coupling sleeve will be  provided to reduce the load on the motor bearing. lt will consist of an impeller of special design. We also make a wide range of mixers suitable for your products. * Sigma Kneaders * Ribbon Blenders * Attritors * Pug Mixers* Hydraulic Dissolver * Planetary Mixers * Batch type Sand Mills * Conical Blenders * Continuous type Sand Mills * Resin Plants * Bead Mills * Turnkey ProjectsAPPLICATIONS:* Varnishes & Paints * Polyurethanes * Colourants * Inks * Foods* Resins, Glues, Adhesives * Pharmaceutical Products * Chemicals * Lacquers * Cosmetics        

Extensively used in food, chemical, paper and pulp industries, our Industrial Agitators are manufactured in compliance with set industrial norms. The Industrial Agitators we make available are used for stirring, agitating and beating of liquids, emulsions, suspensions, etc. Our company is reckoned among the successful Manufacturers and Suppliers of Agitators from Maharashtra. The entire range of the Agitators is reasonably priced by us. It is offered at nominal rates.

• Power: 22 Kw
• Power Source: Electric
• Material: Cast Iron
• Surface Finish: Coated
• Input Voltage: 220 V
• Orientation: Vertical

• Features: Robust construction, High load capacity, Long service life ,Easy installation.

• Material: Mild Steel, Borosilicate Glass
• Phase: Single Phase
• Capacity: 4.3 lit
• Automation Grade: Semi-Automatic
• Frequency: 60 Hz

The anchor agitator/impeller is close clearance, radial flow impeller used for mixing of viscous liquids. The sweep diameter of the anchor impeller is generally 90 to 95 percent of the diameter of the vessel. Anchor-shaped impellers are used for liquid viscosities between 5000 and 50,000 cP. They are common in crystallization reactors where cooling through a jacket is necessary along with good mixing.  If you are unable to view the video

Designed to meet requirements of laboratories demanding wide flexibility of stirring operations, these stirrers are available in various models. Choice of model will be dependant on the batch size /volume to be stirred. Salient Features > Multipurpose stirrers for general purpose & PUF stirring.> Pulley driven / Heavy duty stirrers for polit plant, bench scale process & small batch production.> Models also available with digital speed indicator for speed indication & process validation. PMDC Lab stirrers PMDC Stirrers are specially designed for routine laboratory work, research and development. QA analsis and sample preparations. Stirrers have uniform speed control with digital RMP indicator which goves speed read outs, valuable for applications where process validation and reproducibility required. RQ-121/D. RQ-123/D and RQ-129/D models use direct drive motors & are ideal for day to day laboratoty use with aqueous & low viscosity liquids such as light oils. Sailent Features : > PMDC motor for powerful stirring.> Reliable performance even in continuous use.> Stepless eletronic speed regulator with digital display.> Hollow shaft in geared models permotting height adjustment.> Chuck for easy interchangeability of shaft.> Strirring shaft SS346; Retort Rods SS304.  

• Voltage: 220 V
• Automatic Grade: Automatic
• Material: GLASS
• Phase: SINGLE
• Process: Vacuum Distillation
• Capacity: 5 Liters
• Max Temperature: 120degreec
• Frequency: 50 HZ
• Evaporating Flask Capacity: 500mL - 2L
• Rotation: 30-125 rpm

INDUSTRIAL STIRRER :   This unit is suitable for mixing syrups and liquids. The stirring shaft and the propeller are made out from S.S. 304/316quality. The stirrer shaft is directly fitted to the motor. The unit is supplied with an tubular adjustable M.S. stand. M.S.Channel stand with uppering and lowering arrangement is provided for more than 2 H.P. stirrers are tailor made as per customer's requirements. The motor used are standard 3 phase 1440 RPM.

We present finest range of Sewage Treatment Equipment with advanced biologic film separation technology. Our Sewage Treatment Equipment uses complete physical separation technology and comes with the advantages such as long service life, no wastage, and clear treating water quality. This Sewage Treatment Equipment provides economic water treatment effect without using any chemical additive. Our Sewage Treatment Equipment uses no flocculating agent during water circulation through filtering, which can form ideal treatment effect. Auto wash is a significant breakthrough of water treatment system. The process water completely complying with the car cleaning needs can be obtained by using the Sewage Treatment Equipment. Any dirt particle in the dirty water can be filtered and removed efficiently so that the cleaning water can be recycled completely. Structure Characteristics : It needn̢۪t collect pool or facility with large volume. It does the filtering, suspending and biological treatment work in a tankSimple sludge treatment, No-error, completely recycled and no-drainagePerfect effect of discoloration and filtering. It can filter the negative ion surfactant thoroughlySaves manpower dues to fully automatic control systemSimple operation, convenience maintenance, easy installation Comprises of the following components : Biomembrane GroupControl BoardSewage ValveFlow MeterWater PumpAssociated LineStructural Framing

• MIXING LENGTH: 915 MM

It will have a protecting cage with two 20 mm bar held apart by closing flat ring clamping on to the bar. The shaft will be coupled directly to the motor shaft. An extra bearing on the coupling sleeve will be provided to reduce the load on the motor bearing. lt will consist of an impeller of special design.

• Power: 2.0 HP, 3.0 HP, 5.0 HP, 7.5 HP, 10.0 HP, 15.0 HP, 20.0 HP, 25.0 HP, 30.0 HP
• Brand Name: Akar
• Speed: 115 to 31 RPM
• Features: impeller design, High-Efficiency,
• Treatment Technique: Clarifier, Activated Sludge Process
• Oxygenate Capability (kgO2/h): 2 KgO2/Kwhr

FRP Water Storage Tank, Frp Products, Frp Electric Insulation Material

We are offering eductor. The working principal is same as ejector. It creates vacuum to suck secondary liquid.

Chlorine Leak Absorption System, chlorine water test kit

Wastewater Treatment Equipment

water treatment equipments, Water Treatment System, Water Purification