Tensile Testing Machine Dealers in Thane

XLW (B) Auto Tensile Tester can be used to measure the physical mechanical properties of plastic films, laminated materials, adhesives, adhesive tapes, adhesive bandage (plaster), release paper, protection films, leather, rubber and paper fiber, etc. It can perform test items of tensile, peeling, deformation, tearing, heat seal, adhesive and open force, etc.     Features 1% of full scale effectively ensures the accuracy of test results 2 independent test modes are available, including tensile strength and peeling force to meet the distinct requirements of users 3 kinds of testing data provided for each test i.e. Maximum Value, Minimum Value and Average Value. Group data analysis is also available Elongation rate can be easily obtained by the precise ruler Different test range of load cells and 7 distinct test speeds to meet different test requirements The instrument is controlled by micro-computer with menu interface, PVC operation panel and large LCD display Intelligent designs of over-travel protection, overload protection, automatic position reset and error alert for safe test operation Equipped with RS232 port and micro printer port which is convenient to the data transmission and PC connection Supports LystemTM Lab Data Sharing System for uniform and systematic data management     PrincipleThe pre-conditioned specimen is mounted between two grips, which move in relative direction during the test. The changes of force and displacement are separately recorded by the load cell fixed on the driven grip and the ruler shown on the stand column. The tensile strength, tear strength and elongation rate can be obtained by further calculation.    ApplicationsThis instrument is equipped with more than 100 grips for tests of more than 1000 materials. And customization is also available for special materials tests. Examples of instrument applications:

Our team members are well aware about the payment procedures and they ensure that the clients are completely satisfied with the transactions made. We accept payment through all offline and online mediums. Buy from us the extensive array of Tensile Testing Machine; we are counted amidst the leading Suppliers in the sphere.   Typical applications are: Tensile strength and elongation at break of medical tubing, bandages, dressings and tapes Joint strength of IV connector fittings Suture-to-needle crimp pull out test Tensile strength of suture material and knotting Joint strength and material elongation of respiratory masks Elongation and tensile strength of examination gloves Mechanical strength of orthopaedic implant components

• Type: Pvc Pipe Testing Equipment
• Material: PVC
• Thickness: 20-30mm
• Length: 1-1000mm
• Application: Industrial
• Feature: Eco Friendly
• Surface Treatment: Polished
• Pressure: Medium Pressure
• Certifications: ISO 9001:2008
• Country of Origin: India
• Brand Name: LINUX
• Voltage: 220V
• Power: 2.2
• After-Sales Service Provided: YES
• Screw Design: YES
• Certificate: YES

Computerized Universal Testing Machine have a wide range of applications. A number of materials, metals in different form and shapes can be tested for variety of tests like Tension, Compression, Transverse, Bend, Shear, Brine Hardness etc. Special attachments are also available for testing of Flat Belts, Chain Links, Wire Ropes etc. Control Panel:  Hydraulic circuit - it consists of hydraulic power pack which has a directly driven radial plunger pump which gives a continuous non pulsating flow of oil pressure up to 250 bar. a pressure compensated needle type flow control valve is provided to control the oil flow to cylinder there by achieving a desired piston speed. Infinitely variable speeds an be obtained with help of valves. Optionally this can be controlled from electronic control system.Loading Rate / Straining Rate Control:  This is superfine controlling system which controls loading rate I straining rate as per commands from electronic machine control system. With UP / DOWN Keys on electronic control system loading ratel straining rate is adjusted. Fine UTM Software can send loading rate / straining rate to electronic control system.

• Application: Testing Strength Of Material
• Weight: 400-500kg
• Automatic Grade: Automatic
• Driven Type: Electric
• Warranty: 2years
• Quality: Optimum Quality
• Display Type: Digital

• Machine Capacity: up to 500 Kg. of load.
• Speed: Variables from 10 to 500 mm/minute

Tensile and Elongation as per ASTM – D638 and ASTM – D882 Direct display of results and printout through microcontroller such as Peak load, Break load, Elongation at peak load, Elongation at break load, Tensile strength at peak load, Tensile strength at break load, % elongation at peak load, % elongation at break load could be viewed on the micro controller and printout could be obtained by directly attaching a dot matrix printer to the equipment Graphic display and printout through PC with some additional results such Young’s modulus, Yield load, Yield stress and Load Vs Elongation graph. With merging facility one can merge no’s of files to get results of Average value and Standard deviation value No’s of load cell inputs – 01 No’s. Cross Travel – 1000 mm. PC connections – Rs-232 serial interface port. (USB port optional). Supply – 230 VAC/ 50 Hz. Paint – Powder coated.

Shanta Universal Testing machine is designed for testing Metals and other materials underTension , Compression, Bending, Transverse and Shear loads. Brinell Hardness Test on metals can also be conducted in smaller capacity UTM's. All Shanta Universal Testing Machines are closely controlled for sensitivity, accuracy and calibration during every stage of manufacturing. Every machine is than calibrated over each of its measuring range in accordance with the procedure laid down in BS 1610 and IS 1828. and comply with Grade “A” and Class 1.0 respectively

We are leading Tensile Machine - Computerised, Manufacturers, Suppliers & Exporters Located in Dombivli Dist. Thane, Mumbai India.   As per as per ASTM D - 638 / ASTM D – 882   Model: AE-TT-C-1LC-500 Reference Standards: ASTM, ISO, IS   Specifications : → Load Capacity: 500 Kg with 10 gram resolution (others optional). → Load cell: 1 No (Others optional). → Cross Travel: 1000 mm with 0.01 mm resolution. → Test Speed: 10 – 500 mm/Minute (others optional). → Reports: Graphical + Data through software → Units: KG; Newton; Pound; cm; mm; inch. → Data Merging Facility: Available → Reports Contain: Peak load, Break load, Yield Load, Elongation @Peak load, Elongation     @break load, Elongation @yield load, Tensile Strength @peak load, Tensile strength @break     load, % elongation @peak load, % elongation @break load, % elongation @yield load, Young’s     modulus, Load Vs Elongation graph. → Accessories: Pneumatic Grip– 1 Pair → Supply: 230 VAC/50 Hz → Paint: Powder coated   Special Features : Table Top Model.    

Produced using top-notch quality components and the latest technology, our Universal Testing Machines are high on counts of performance, reliability, durability, corrosion resistance and efficiency. Also, these products are known for low maintenance cost, smooth functioning and minimal power consumption. Place medium or bulk orders of Electrical Engineering Laboratory Equipment, we assure timely delivery across different parts of the country.

Material testing machines can analyze the whole testing result including elongation, stress, strain, break value and average value. It can also fit to different specimen shape or be required to destroy the specimen and record the entire testing process and analysis the physical features of the specimen like tension force, bending strength, wear-resisting, impact, torque force, abrasion, fatigue, hardness, peeling force, viscosity...etc. We also supply the specimen maker equipment like pneumatic specimen press, hardness specimen cutting device, electrical forming machine. These equipment can make the standard specimen to get precise result during test.  

• Capacity: 200 KN
• Usage/Application: Industrial
• Finishing: Powder Coated
• Brand Name: EQVIMECH
• Model Name/Number: EM-00212
• Depth: 500mm
• Operating Power: 230 V
• Tensile Strength: 20 Ton

universal tensile testers, physical testing machines

tensile machine