Testing Equipment Dealers in Charai, Thane

CX-401 measures : pH, redox potential (mV), conductivity, resistivity, salinity in KCl or NaCl, TDS, dissolved oxygen in % of saturation or in mgl, atmospheric pressure and temperature. “HOLD” function to freeze the result on the display. Signalisation of the result stabilisation “READY” with symbol and sound. Possibility of sending to a PC a report of calibration - up to 10 last calibrations. The meter may be used for the field measurements as well as during accurate laboratory work. The meter is equipped with an easy-to-read back-light LCD display with brightness control. All functions are distinctive by very high accuracy and repeatability. Unification of the operating procedures in all measuring functions makes working trouble-free. Low weight and small size make working in the field easier. Waterproof housing (IP-66) enables working in difficult conditions.

"Classic Scientific” makes Laboratory Environmental Test Chambers, which are designed to suit the multi- application in the growing field of Medical, Agricultural, Industrial, Research Laboratories, Metal Treatment, and Various Industries. Our offered Environmental Test Chamber has carved an edge in international markets on the base o their apt functioning at low maintenance. These Environmental Test Chambers are also helpful in maintaining the climate conditions, which is one of their unique features. Traits :- Temperature + 100C to 600CHumidity (R.H.) 40% R.H. to 95% R.HDigital Display Electronic Temperature cum R.H(Humidity) Controller with an accuracy of +/-0.50C & +/-3% R.HMild Steel Powder Coated / Stainless Steel Matt Finish Used at :- MedicalAgriculturalIndustrial Research LaboratoriesMetal Treatment Specifications :- ModelsCS-03aCS-03bCS-03cCS-03d ChamberVolume90.0ltrs.170.0ltrs.285.0 ltrs.340.0ltrs. CubicFeet361012 Internal Size cms.40 X 40 X 5750X 40 X 8557X 57 X 8860X 60 X 95 ExternalSize cms.53X 68 X 13563X 68 X 16370X 85 X 16673X 88 X 173Shelves2233 Range+ 100C to 600CController Accuracy+/-0.50C of set value for Temp./ +/-3% R.H. (Humidity)Uniformity+/-1.00C for Temp +/- 3% for HumidityAir Heater ElementSpecial Type S.S. Tubular Air Heaters with fins.Heat up Time30 min. up to 600C without load.Cool Down time30 min. upto + 100C without loadCoolerPlate Fin CoolerCompressorHermetically Sealed Brand New Kirloskar CompressorControllerDigital Display Electronic Controller.SensorPt-100 for Dry & Wet Bulb / Capacitor type for Humidity.Internal ChamberStainless Steel 304 / 316L quality.ExternalMild Steel Powder Coated / Stainless Steel Matt Finish.InsulationBodyPuf 50mm / Glass Wool 65mmDoorThermo Cole.Inner Acrylic DoorInner Full Size Sea through Acrylic 8 mm thick.CirculationMotorizedBlower from backAirCirculation Motor1/12 Hp, 1440 R.P.M.Steam Injection SystemI.S.I. Mark Kettle HeaterWater tank Cartridge Reservoir4 ltrs4 ltrs9 ltrs9 ltrsBoiler4 ltrs4 ltrs9 ltrs9 ltrsWater qualitypH6.2 to 7.2Safety DeviceWater Level alarmOptionalImported Sensor0 to 100% R.H., Accuracy of +/-2%Computer InterfaceRS 485 / RS232 interface for multiple / single communication port.Safety DeviceThermostator Energy Regulator.  Over heating or humidity soft alarm.CyclicTimer0to 24 hrs X 7 days cyclic ON / OFF timer for illuminating condition.Capacity(watts)2000275032503750PowerConsumption9amps12 amps14 amps17 ampsNetWeight85 kgs90 kgs105kgs117kgsElectricrequirements AC230 V & 50 Hz cycle.

We are offering fully automated line leakage tester: model-model 620l. the linechek® model 620l is a fully automated line leakage tester that can be configured to perform 8 of the most commonly required line leakage tests. The 620l has the most common measuring devices (md's) already incorporated into the instrument and can perform patient lead tests with an optional scanning matrix. The 620l also features a continuous run capability which allows the dut to be run without shutting down between line leakage tests. This remains true even in reverse polarity conditions. With advanced features and capabilities the 620l can measure the voltage drop across measuring devices for compliance to iec60065 and iec60990, record the maximum rms or peak leakage current during a test, and comply with iec60601-1 for ac, dc, and ac+dc leakage measurements. When configured with an optional run test feature, the 620l can also monitor minimum and maximum readings for voltage, current, watts, power factor, and leakage current. ethernet, usbrs-232 or gpib communication interfaces allow for the automated control of the instrument. most required for electrical safety compliance.

• Material: Metal
• Driven Type: Electric
• Power: 1-3kw
• Voltage: 220V
• Weight: 40-50kg
• Warranty: 1year
• Country of Origin: India

• Display: 16 X 1 Alpha-numeric LCD Display With Backlight
• Models: P-181 or. F-181
• Type of Meter: Insertion Paddle Wheel type Velocity Meter
• Max. % of Solids: 1% of fluid volume, non-abrasive, non-magnetic, <100 micron in dia. & length
• Mounting: Field or, Panel
• Pressure drop: Less than 0.1 bar
• Pipe Line Size: Min. 15 Mm Up to 500 Mm
• Pulses: 4 Pulses each rotation
• Accuracy: +/- 1% of Full Scale if velocity is more than 0.5 m/s
• Repeatability: +/- 0.5%
• Linearity: +/- 2% of full scale
• Enclosure: Weather proof IP 65
• Gland: PO7
• Fitting Material: ABS, SS304 or, SS316
• Fitting Type: Threaded, Flanged, Weld on Adaptor
• Velocity Range: From 0.5 to 5.0 Mps
• Max. Operating Temperature: 60°c for Pp Sensor with Abs Fittings & 100°c for Ss Sensor with Ss Fitting
• Sensor Cable Length: 0.5 mtrs for Field Mounted Meter & 3 mtrs for Panel Mounted Meter
• Paddle: PVDF (Magnetic up to 100°C & Non Magnetic up to 80°C)
• Indicator Housing: Polycarbonate
• O-rings/Pin: Viton / Hastealloy C
• Sensor Rod: PP or, SS316
• Indicator unit dimensions: 110 mm (H) X 110 mm (W) X 150 mm (D)
• Field selectable Units: MPS
• Supply: 230 V AC +/- 15%, 50 Hz
• T Fitting: it is Compulsory with Pp Or, Ss 316 Flow Sensors (selection from Type of T-fittings)

• Frequency: 128 Hz
• Measurement Range: Up to 0.1 Ohms
• Accuracy: 2%
• Display: 3½ digit, Low battery indication
• Battery: 12 V 1.5 Ah, rechargeable
• Weight: 1.5 kg
• Dimensions: 225 mm x 150 mm x 75 mm
• Working Temperature: 0 C to 55 C

In order to reduce Broadband and ISDN Line transmission losses, it is essential to check Earth resistance. With this tester we can check earth resistance up to 0.1 ohms. We can also measure soil resistivity. Unit works on chargeable battery. Necessary accessories along with charger are provided with unit. Features Measurement up to 0.1 Ohms Accuracy up to 2% Digital display Generated signal is not in range of harmonics of mains supply to avoid interference Test resistor are provided to confirm calibration Low battery consumption Battery is chargeable maintenance free type Heavy duty accessories provided for proper reading Operation Short left side two terminals E1 & P1 and connect it to point whose resistance is to be measured. This wire should be shortest possible. Connect other 2 wire provided along with unit to other two terminals. Fix the rods at app.10 to 15 meters in different directions. Pour a glass of water on the rod to make good contact. Select 2V range & press test button. Then display will give direct reading of earth resistance.  

As you must know Rain Water Harvesting - is the activity of collection of water. It can be either store for direct use or can be recharged into the ground. As studied above, while dealing in second part of the definition that – “it can be recharged into the ground”. Resistivity test is the key factor. As we know the underground strata broadly it is - soil then Murom layer next is the Hard Murom & then the Basalt or in some cases it is marine clay & basalt.

A cylindrical Main capsule fitted with powerful magnet, which moves up & down alongwith the level rise or fall. This movement will be magnetically coupled with the follower Red indicator outside the chamber which is enclosed in the glass tube.MOC - C.S./S.S. 304/ SS 316/ PP/PVDF/PTFERange - 250 MM - 3000 MMConnection - 100 NB & 150 NB, Flanged typeFloat - SS-304/316 L, Glass, HDPE, PP, PVDF, PTFE ECTFE / HalarcoatedApplication - Suitable for hazardous, expensive, poisonous & flammable liquids. Option : Can be provided with level transmitter & with or without HART-Protocol We are one of the foremost manufacturers and suppliers of a comprehensive assortment of Side & Top Magnetic Level Indicator. Our range is appreciated for higher degree of accuracy, precision & compact design, durability and longer service life.. Side Mounted Magnetic Level Indicator: A cylindrical S. S. float fitted with powerful magnet, which moves up & down alongwith the level rise or fall. This float movement will be magnetically coupled with the follower Red indicator outside the chamber which is enclosed in the glass tube.MOC - C.S./S.S. 304/ SS 316/ PP/PVDF/PTFERange - 250 MM - 3000 MMConnection - 100 NB & 150 NB, Flanged typeFloat - SS-304/316 L, Glass, HDPE, PC PVDF, PTFE ECTFE / HalarcoatedApplication - Suitable for hazardous, expensive, poisonous & flammable liquids.Option - Can be provided with level transmitter with or without HART-Protocol.

• Brand Name: AVI
• Accuracy: 0.5 percentage of full scale
• Voltage: 240 V
• Application: Laboratory
• Power Source: Electric
• Usage/Application: Laboratory
• Material: SS
• Display Type: Digital

Products - Digital Friability Apparatus (Single/ Double Drum) Measures Obsession Strength of tablets with programmable timer. Rotation Speed 25rpm ±1, auto & manual mode on 3 digits LED display and it has a 3 digit presentable control.    

Ultrasonic technology (no mechanical moving parts), Accuracy class 2 acc. EN 1434, Manufacturer approval H1 acc. MID (European Measurement Instrument Directive), Energy meter consist of flow part, calculator and temperature sensor, The energy meter shall be calibrated as one unit acc. EN1434, flow sensor for cooling application in IP65 (protected US sensors), max flow rate shall be 2x nominal flow rate (permanent).

The Young Lin Blood Alcohol Concentration (BAC) Analyzer can precisely analyze the amount of alcohol in the blood of a suspect related to drunk driving. It can also distinguish the drinking of inedible alcohol by analyzing Methyl alcohol or alcohol metabolites in blood.

digital lcr meter, Lcr Meter, Led Dome Lights

Range - 25NB To 300NB. Inbuilt Pressure and Temperature Compensation Extended Neck for High Temperature Application Integral and Remote Electronics Available End Connection - Flgd / Sandwitch / Insertion Type also Upto 2mtrs Pipe ID Material of Construction - 55 304/316 NIBR

Digital Torque Tester, Torque Analyzers, Magnetic Powder Brake

line testers, board band line testers, Mini Cable Fault Locator

We are offering environmental test chamber with Leak proof positive locking arrangment for door. Chamber illuminated with bulb.

Fls-03 Level Switch, FLS-04 Level Switch, FLS-05 Level Switch

Side Mounted Magnetic Level Indicator, Conical Basket Strainer

telecom testing equipment

Energy Meter, Barcode Label, pressure sensitive labels, Stickers

conductivity indicators, flow transmitters, Flow Indicators, Level Gauges

battery monitors, battery management systems, Line Of Sight Surveys

Tube Tester

electronic microcontroller, Rgb Controller, temperature controller timer

Local Line / Broadband / ISDN Line Tester