Testing Equipment Dealers in Louis Wadi, Thane

Magnetic flow meter virtually approaches the ideal flow meter suitable for wide range of liquid flow measurements even with very low conductivities. The meter offers no resistance to flow hence the pressure drop is almost negligible. The measurement being based on Faraday’s law of Electromagnetic induction, is independent of viscosity, density, pressure & temperature of flowing medium. The measurement is not affected by solid impurities as long as the min. conductivity of 5 scm is available. It is a true volumetric flow measurement. We offer various materials of construction for meter lining & electrodes to cover majority of corrosive liquids.

We are offering fully automated line leakage tester: model-model 620l. the linechek® model 620l is a fully automated line leakage tester that can be configured to perform 8 of the most commonly required line leakage tests. The 620l has the most common measuring devices (md's) already incorporated into the instrument and can perform patient lead tests with an optional scanning matrix. The 620l also features a continuous run capability which allows the dut to be run without shutting down between line leakage tests. This remains true even in reverse polarity conditions. With advanced features and capabilities the 620l can measure the voltage drop across measuring devices for compliance to iec60065 and iec60990, record the maximum rms or peak leakage current during a test, and comply with iec60601-1 for ac, dc, and ac+dc leakage measurements. When configured with an optional run test feature, the 620l can also monitor minimum and maximum readings for voltage, current, watts, power factor, and leakage current. ethernet, usbrs-232 or gpib communication interfaces allow for the automated control of the instrument. most required for electrical safety compliance.

• Material: Metal
• Driven Type: Electric
• Power: 1-3kw
• Voltage: 220V
• Weight: 40-50kg
• Warranty: 1year
• Country of Origin: India

• Weight: 150g
• Accuracy: +0.4 Ml/min Or 2.5 %
• Brand Name: PCI
• Size: 68 x 130 x 30 mm
• Model Name/Number: DFM 05
• Batteries: Yes
• Usage/Application: Laboratory
• Warranty: 1 Year
• Resolution: 0.1 ml/min
• Measure Range: 0 to 500ml/min

• Type of Enclosure: IP 54, IP 65 or, Flameproof
• Conductivity Range: 0 to 2000 micros/cm
• Sensing Electrode: In SS316 construction with PTFE insulation
• Process Connection: 1/2
• Temperature Compensation: Can be provided

EHEDG and FDA certified Online Conductivity Transmitters are used in pharmaceutical Companies where there is a need to check the conductivity of the flowing or, stored liquids to maintain the quality of their product. Using the suitable controller and the suitable control valve, conductivity of the liquid can be  controlled.

Regulated Parking and Traffic Management will install the required signs to show that unauthorised vehicles parking there will be clampedtowed away We will then monitor your car park private land or road, and also respond to your call for unauthorised parking offenders. We will wheel clamp and eventually tow away the offending vehicle working within the rules and guidelines provided by the Security Industry Authority and your instructions. Wheel clamping has proven the most effective tool in providing a parking control solution. Akme Security Ltd provides licensed clamping to its clients. All staff employed have attended training courses and meet the stringent requirements to obtain an SIA license that is now a legal requirement. This gives our operatives the knowledge and confidence to deal with all aspects of conflict management and customer service. All vehicles that are clamped are photographed using digital cameras to help prevent disputes and avoid claims being made against us. Our clamping units can operate on a call-out only basis or regular visits can be arranged to patrol your site and reduce illegal parking.

• Type: Digital Ph Meters
• Weight: 100-200gm
• Color: Maroon, Red, White, Yellow
• Application: Indsustrial Usage
• Display Type: Digital
• Frequency: 50Hz-65Hz
• Automatic Grade: Automatic
• Material: Plastic
• Power Source: Battery
• Feature: Accuracy, Durable, Light Weight, Lorawan Compatible, Low Power Comsumption, Multi Jet, Stable Performance
• Warranty: 1Year

• Brand Name: AVI
• Accuracy: 0.5 percentage of full scale
• Voltage: 240 V
• Application: Laboratory
• Power Source: Electric
• Usage/Application: Laboratory
• Material: SS
• Display Type: Digital

• MOC: SS 304, SS 316, SS 316L, PTFE Lined
• Temperature Max: 200º C
• Pressure Max: 5 kg/cm 2
• Length Max: 10 Meters
• Connection: Flange Type OR Screwed Type
• Additional Attachment (If required): Level Switch (For HI – LOW)

(Model : L-11/ L-12 )    Put an end to common problems of conventional U-seal like Contamination of main liquid, Dangerous liquid spilling over tank top, Dangerous vapour escape when sealing liquid is blown out sucked in during transfers.Vapour sealed concept for vapour isolation in float & board type level indicator - Superior & Alternative advantages Absolute vapour tightness, Clean installation, No sealing liquids Trouble free service, Suitableeven for reacting liquids like HCL, HNO3, NH4OH, etc.

As you must know Rain Water Harvesting - is the activity of collection of water. It can be either store for direct use or can be recharged into the ground. As studied above, while dealing in second part of the definition that – “it can be recharged into the ground”. Resistivity test is the key factor. As we know the underground strata broadly it is - soil then Murom layer next is the Hard Murom & then the Basalt or in some cases it is marine clay & basalt.

• Range: 250 MM - 3000 MM

A cylindrical Main capsule fitted with powerful magnet, which moves up & down alongwith the level rise or fall. This movement will be magnetically coupled with the follower Red indicator outside the chamber which is enclosed in the glass tube.

The Ultrasonic Leak Detector (ULD) is a hand-held, high quality instrument that can locate costly leaks ina compressed air system. A person using the ULD need only aim it in the direction of a suspected leak. When a leak is present, an audible tone can be heared with the use of the headphones, and the LED dispaly will light. Testing the various unions, pipes, valves and fittings of a complete installation can be done quickly and effectively at distances up to 20' (6.1m) away! Plants that aren't maintained can easily waste up to 30% of the compressor output through leaks that go undetected. Saving the wasted compressed air reduces overall operating costs.  

If the gd is not proper then exchange line cards can not be protected from surge voltages. This is a specialized machine for testing pouyet krone e10b ipm g.d. Tube.

This is very low cost and easy to operate model is the most basic form assessing fabric quality and ideal for small warehouse, garment and retail unit for Data Logger For Fabric Inspection Machine. Features: Suitable for all kind of fabrics Variables speed 5- 50 Meters / Min Full Forward & Reverse run Top and Bottom Illumination Mechanical Counter Meter Optional: Auto Stop at Feed Electronic Counter Meter Foot Switch Control Wide Measuring Scale

A float containing magnets moves with changing liquid level, in a non-magnetic, non-fragile chamber. Magnetically coupled follower (Indicap) or bi-coloured Rotocylinders (Rotocyl), indicate the level externally on a calibrated scale.   What’s Special * Non fragile Metal Chamber* Rotocyl / Indicap Follower (Please select)* Magnatrans Add-On Transmitter - IS 5780 - Gr IIC* Magnalatch Steplessly Adjustable Add-On Limit Switches

A very useful joint testing equipments, to check tube expanded and welded joints between Tube and Tube sheet. To operate the Joint Tester is inserted into the tube for seal to expand with a push of a button. Vacuum is created between two seals, one expanded into the Tube ID and other seal covering Tube OD. Tube joint leak, if any, is detected as the vacuum shown on the gauge starts dropping. A very versatile tool to cover tubes of sizes from ¾” to 1. ¼” OD by a simple change of a set of manifold and seals.

Battery monitor is one of the accessories of DC system used in power systems. It monitors battery's voltage on line. It adopts modular design that makes both installation and maintenance convenient. Its embedded mini processor can be set according to battery performance. It is able to monitor two sets of independent batteries with different parameter settings. It has an Adopting relay without contact that ensures high reliability.

digital lcr meter, Lcr Meter, Led Dome Lights

metallurgical testing equipment, chemical equipment, Testing Equipment

line testers, board band line testers, Mini Cable Fault Locator

We are offering environmental test chamber with Leak proof positive locking arrangment for door. Chamber illuminated with bulb.

Battery Monitoring System, Ups, Solar Inverter, kvm switches, Server Rack

Digital Torque Tester, Torque Analyzers, Magnetic Powder Brake

Dual Trace Oscilloscopes, Led Panel Light, Solar Products, LED Bulbs

Energy Meter, Flow Nozzle, pH Meter, Industrial Stirrer, Water Bath

electro energy meters, Transformers

battery monitors, battery management systems, Line Of Sight Surveys

testing measuring equipment

Tube Tester

electrical meters, electrical towers, electrical transmission lines