Testing Equipment Dealers in M. G. Road, Thane

• Display: 16 X 1 Alpha-numeric LCD Display With Backlight
• Models: P-181 or. F-181
• Type of Meter: Insertion Paddle Wheel type Velocity Meter
• Max. % of Solids: 1% of fluid volume, non-abrasive, non-magnetic, <100 micron in dia. & length
• Mounting: Field or, Panel
• Pressure drop: Less than 0.1 bar
• Pipe Line Size: Min. 15 Mm Up to 500 Mm
• Pulses: 4 Pulses each rotation
• Accuracy: +/- 1% of Full Scale if velocity is more than 0.5 m/s
• Repeatability: +/- 0.5%
• Linearity: +/- 2% of full scale
• Enclosure: Weather proof IP 65
• Gland: PO7
• Fitting Material: ABS, SS304 or, SS316
• Fitting Type: Threaded, Flanged, Weld on Adaptor
• Velocity Range: From 0.5 to 5.0 Mps
• Max. Operating Temperature: 60°c for Pp Sensor with Abs Fittings & 100°c for Ss Sensor with Ss Fitting
• Sensor Cable Length: 0.5 mtrs for Field Mounted Meter & 3 mtrs for Panel Mounted Meter
• Paddle: PVDF (Magnetic up to 100°C & Non Magnetic up to 80°C)
• Indicator Housing: Polycarbonate
• O-rings/Pin: Viton / Hastealloy C
• Sensor Rod: PP or, SS316
• Indicator unit dimensions: 110 mm (H) X 110 mm (W) X 150 mm (D)
• Field selectable Units: MPS
• Supply: 230 V AC +/- 15%, 50 Hz
• T Fitting: it is Compulsory with Pp Or, Ss 316 Flow Sensors (selection from Type of T-fittings)

• Material: Metal
• Driven Type: Electric
• Power: 1-3kw
• Voltage: 220V
• Weight: 40-50kg
• Warranty: 1year
• Country of Origin: India

Regulated Parking and Traffic Management will install the required signs to show that unauthorised vehicles parking there will be clampedtowed away We will then monitor your car park private land or road, and also respond to your call for unauthorised parking offenders. We will wheel clamp and eventually tow away the offending vehicle working within the rules and guidelines provided by the Security Industry Authority and your instructions. Wheel clamping has proven the most effective tool in providing a parking control solution. Akme Security Ltd provides licensed clamping to its clients. All staff employed have attended training courses and meet the stringent requirements to obtain an SIA license that is now a legal requirement. This gives our operatives the knowledge and confidence to deal with all aspects of conflict management and customer service. All vehicles that are clamped are photographed using digital cameras to help prevent disputes and avoid claims being made against us. Our clamping units can operate on a call-out only basis or regular visits can be arranged to patrol your site and reduce illegal parking.

As you must know Rain Water Harvesting - is the activity of collection of water. It can be either store for direct use or can be recharged into the ground. As studied above, while dealing in second part of the definition that – “it can be recharged into the ground”. Resistivity test is the key factor. As we know the underground strata broadly it is - soil then Murom layer next is the Hard Murom & then the Basalt or in some cases it is marine clay & basalt.To find out these gaps in Basalt, Soil Resistivity Meter is used. Proceeding further, there are 2 types of survey method.1) 2 Pin Method 2) 4 Pin Method

We are offering fully automated line leakage tester: model-model 620l. the linechek® model 620l is a fully automated line leakage tester that can be configured to perform 8 of the most commonly required line leakage tests. The 620l has the most common measuring devices (md's) already incorporated into the instrument and can perform patient lead tests with an optional scanning matrix. The 620l also features a continuous run capability which allows the dut to be run without shutting down between line leakage tests. This remains true even in reverse polarity conditions. With advanced features and capabilities the 620l can measure the voltage drop across measuring devices for compliance to iec60065 and iec60990, record the maximum rms or peak leakage current during a test, and comply with iec60601-1 for ac, dc, and ac+dc leakage measurements. When configured with an optional run test feature, the 620l can also monitor minimum and maximum readings for voltage, current, watts, power factor, and leakage current. ethernet, usbrs-232 or gpib communication interfaces allow for the automated control of the instrument. most required for electrical safety compliance.

digital lcr meter, Lcr Meter, Led Dome Lights

• Weight: 150g
• Accuracy: +0.4 Ml/min Or 2.5 %
• Brand Name: PCI
• Size: 68 x 130 x 30 mm
• Model Name/Number: DFM 05
• Batteries: Yes
• Usage/Application: Laboratory
• Warranty: 1 Year
• Resolution: 0.1 ml/min
• Measure Range: 0 to 500ml/min

• Type: Ph Meter
• Weight: 100-200gm
• Color: Grey, Maroon, White, Yellow
• Display Type: Digital
• Frequency: 50Hz-65Hz
• Automatic Grade: Automatic
• Material: Plastic, Stainless Steel
• Power Source: Battery
• Feature: Accuracy, Durable, Light Weight, Lorawan Compatible, Low Power Comsumption, Multi Jet, Stable Performance
• Warranty: 1Year

Laboratory meter in bench-top housing, powered by 12V power adapter. * The meter is equipped with a large, easy-to-read back-light LCD display with brightness control. * Measures conductivity, salinity, resistivity, TDS and temperature. * The most recent version of this model has been updated and has more possibilities which    facilitate usage and increase accuracy. * “HOLD” function to freeze the result on the display. * Signalisation of the result stabilisation “READY” with symbol and sound. * Possibility of sending to a PC a report of calibration - up to 10 last calibrations. * Thanks to a wide conductivity measuring range it may be used for ultra pure water as well    as saline water. * 6 sub-ranges switched automatically. * Calibration by entering the constant K of the cell or in standard solutions in 1 to 5 points. * Possibility of changing the reference temperature. * Stores constants K of 3 cells which cover the whole measuring range. * Wide range of α coefficient chosen depending on the kind of measured solution. * Possibility of changing the reference temperature value. * Automatic or manual temperature compensation. * Converting conductivity into salinity in NaCl or KCl based on the real characteristics instead    of a constant coefficient what greatly increases the accuracy. * Possibility to determine the TDS with possibility of entering the TDS coefficient value in the    range 0.2 to 1.0. * Measuring range 0to500 mS/cm sufficient for measurements in ultra pure water and high    salt concentration samples. Metal electrodes are easy to clean and PVC body protects it    against mechanical damage. * In case of measurements of natural water with conductivity from 60 μS/cm to 1 mS/cm    the meter enables using non-linear temperature compensation. The parameters of this    type of water is determined by the norm EN27888:1999 and concerns surface water,    deep water and well water. * This solution lowers the measurement error. * The measurement accuracy of the ultra pure water with temperature compensation has    been improved by automatic adjustment of α coefficient depending on the kind of trace    contaminations and temperature. * Internal clock with date. * Internal data-logger enables storing up to 4000 measurements taken in series or singly   with temperature, time and date. * Additional function of resistivity measurement in liquid. * Storing the date of next calibration and remembering it in the right moment to the user. * Non-volatile memory. * USB output. The meter meets the GLP requirements. * 24 months of warranty for the meter.

This is very low cost and easy to operate model is the most basic form assessing fabric quality and ideal for small warehouse, garment and retail unit for Data Logger For Fabric Inspection Machine. Features: Suitable for all kind of fabrics Variables speed 5- 50 Meters / Min Full Forward & Reverse run Top and Bottom Illumination Mechanical Counter Meter Optional: Auto Stop at Feed Electronic Counter Meter Foot Switch Control Wide Measuring Scale

• Range: 250 MM - 3000 MM

A cylindrical Main capsule fitted with powerful magnet, which moves up & down alongwith the level rise or fall. This movement will be magnetically coupled with the follower Red indicator outside the chamber which is enclosed in the glass tube.

(Model : L-1625)   Top mounted ensures absolute safety simple principle of buoyancy & magnetism works together to indicate level of toxic liquids with high pr. Application like molten sulphur phosphorus amonia, acids solvents liquid chlorine lead etc.  

A very useful joint testing equipments, to check tube expanded and welded joints between Tube and Tube sheet. To operate the Joint Tester is inserted into the tube for seal to expand with a push of a button. Vacuum is created between two seals, one expanded into the Tube ID and other seal covering Tube OD. Tube joint leak, if any, is detected as the vacuum shown on the gauge starts dropping. A very versatile tool to cover tubes of sizes from ¾” to 1. ¼” OD by a simple change of a set of manifold and seals.

This tester is useful for testing exchange and subscriber side of the line. On the exchange side we can check Exch. Voltage & Dial tone. On the subscriber side we can check the presence of AC voltage, Battery, Earth, Short-circuit and Condenser click. We can also give a ring to the subscriber and talk to them. There is also a provision to check exchange-side ISDN voltage. Similarly for broadband we can verify whether loop resistance is less than 1 K-Ohms. There is also a provision to send a tone to catch a pair. For testing line in field, Field line tester is also available. Features Compatible with MDF Test board Easy to use operation. Any layman can use it Measures Exchange side as well as Line side parameters Provision to give ring & speech facility Provision to measure ISDN voltage Provision to check loop resistance for broadband line Provision to feed tone on line to detect particular pair Very low power requirement. Mains operated Compact & light weight Direct measurement Use of high speed circuitry Tests any type of metallic telecom cable Operation Exchange side is connected to terminals marked “Exchange”. Similarly line side is connected to terminals marked “Line side”. Exchange Earthing is connected to Eth terminal. Where as Telephone handset is connected to terminals marked “Speech”. On Exchange side press “V” button, then meter will indicate Exchange voltage. For dial tone button we get dial tone on handset. On line side we can check Battery A/B, Earth A/B, Short circuit / Condenser click. We can also give Ring to party. If party lifts the handset we get LED indication. Then we can talk to party. There is provision to feed tone on the line by pressing “Tone” button. For broadband line we can check loop resistance by looping that pair at far end.

Battery monitor is one of the accessories of DC system used in power systems. It monitors battery's voltage on line. It adopts modular design that makes both installation and maintenance convenient. Its embedded mini processor can be set according to battery performance. It is able to monitor two sets of independent batteries with different parameter settings. It has an Adopting relay without contact that ensures high reliability.

• Type: Magnetic Level Indicator
• Material: Alloy Steel, Brass, Stainless Steel
• Application: Testing Water Level
• Color: Black, Grey, Silver
• Feature: Accuracy, Easy To Fit, Perfect Strength
• Condition: New
• Display Type: Analog, Digital
• Automatic Grade: Automatic

It is used to measure the level of fluids. Fabricated using superior quality basic material by employing advanced machinery and sophisticated tools, these products compiled to the defined parameters of the industry in an efficient manner. These magnetic level indicators are mainly used in the hazardous pressurized vessels. Therefore, customers can avail these offered products from us in multifarious sizes and specifications as per their requirement.

A float containing magnets moves with changing liquid level, in a non-magnetic, non-fragile chamber. Magnetically coupled follower (Indicap) or bi-coloured Rotocylinders (Rotocyl), indicate the level externally on a calibrated scale.   What’s Special * Non fragile Metal Chamber* Rotocyl / Indicap Follower (Please select)* Magnatrans Add-On Transmitter - IS 5780 - Gr IIC* Magnalatch Steplessly Adjustable Add-On Limit Switches

"Classic Scientific” makes Laboratory Environmental Test Chambers, which are designed to suit the multi- application in the growing field of Medical, Agricultural, Industrial, Research Laboratories, Metal Treatment, and Various Industries. Our offered Environmental Test Chamber has carved an edge in international markets on the base o their apt functioning at low maintenance. These Environmental Test Chambers are also helpful in maintaining the climate conditions, which is one of their unique features. Traits :- Temperature + 100C to 600CHumidity (R.H.) 40% R.H. to 95% R.HDigital Display Electronic Temperature cum R.H(Humidity) Controller with an accuracy of +/-0.50C & +/-3% R.HMild Steel Powder Coated / Stainless Steel Matt Finish Used at :- MedicalAgriculturalIndustrial Research LaboratoriesMetal Treatment Specifications :- ModelsCS-03aCS-03bCS-03cCS-03d ChamberVolume90.0ltrs.170.0ltrs.285.0 ltrs.340.0ltrs. CubicFeet361012 Internal Size cms.40 X 40 X 5750X 40 X 8557X 57 X 8860X 60 X 95 ExternalSize cms.53X 68 X 13563X 68 X 16370X 85 X 16673X 88 X 173Shelves2233 Range+ 100C to 600CController Accuracy+/-0.50C of set value for Temp./ +/-3% R.H. (Humidity)Uniformity+/-1.00C for Temp +/- 3% for HumidityAir Heater ElementSpecial Type S.S. Tubular Air Heaters with fins.Heat up Time30 min. up to 600C without load.Cool Down time30 min. upto + 100C without loadCoolerPlate Fin CoolerCompressorHermetically Sealed Brand New Kirloskar CompressorControllerDigital Display Electronic Controller.SensorPt-100 for Dry & Wet Bulb / Capacitor type for Humidity.Internal ChamberStainless Steel 304 / 316L quality.ExternalMild Steel Powder Coated / Stainless Steel Matt Finish.InsulationBodyPuf 50mm / Glass Wool 65mmDoorThermo Cole.Inner Acrylic DoorInner Full Size Sea through Acrylic 8 mm thick.CirculationMotorizedBlower from backAirCirculation Motor1/12 Hp, 1440 R.P.M.Steam Injection SystemI.S.I. Mark Kettle HeaterWater tank Cartridge Reservoir4 ltrs4 ltrs9 ltrs9 ltrsBoiler4 ltrs4 ltrs9 ltrs9 ltrsWater qualitypH6.2 to 7.2Safety DeviceWater Level alarmOptionalImported Sensor0 to 100% R.H., Accuracy of +/-2%Computer InterfaceRS 485 / RS232 interface for multiple / single communication port.Safety DeviceThermostator Energy Regulator.  Over heating or humidity soft alarm.CyclicTimer0to 24 hrs X 7 days cyclic ON / OFF timer for illuminating condition.Capacity(watts)2000275032503750PowerConsumption9amps12 amps14 amps17 ampsNetWeight85 kgs90 kgs105kgs117kgsElectricrequirements AC230 V & 50 Hz cycle.

The Ultrasonic Leak Detector (ULD) is a hand-held, high quality instrument that can locate costly leaks ina compressed air system. A person using the ULD need only aim it in the direction of a suspected leak. When a leak is present, an audible tone can be heared with the use of the headphones, and the LED dispaly will light. Testing the various unions, pipes, valves and fittings of a complete installation can be done quickly and effectively at distances up to 20' (6.1m) away! Plants that aren't maintained can easily waste up to 30% of the compressor output through leaks that go undetected. Saving the wasted compressed air reduces overall operating costs.  

Flow Meters, Fls-03 Level Switch, FLS-04 Level Switch, FLS-05 Level Switch

Range - 25NB To 300NB. Inbuilt Pressure and Temperature Compensation Extended Neck for High Temperature Application Integral and Remote Electronics Available End Connection - Flgd / Sandwitch / Insertion Type also Upto 2mtrs Pipe ID Material of Construction - 55 304/316 NIBR

Battery Monitoring System, Ups, Solar Inverter, kvm switches, Server Rack

metallurgical testing equipment, chemical equipment, Testing Equipment

line testers, board band line testers, Mini Cable Fault Locator

Energy Meter, Barcode Label, pressure sensitive labels, tamper evident seals

Digital Torque Tester, Torque Analyzers, Magnetic Powder Brake

Flow Meters, Pressure Gauges, conductivity indicators, flow transmitters

Oscilloscope, LED Bulbs, Led Panel Light, Dual Trace Oscilloscopes, car fan

Power Control Monitoring, Uninterruptible Power Supplies, Outdoor Enclosures

Conductivity Meter, Flow Nozzle, pH Meter, Industrial Stirrer, Water Bath