Testing Equipment Dealers in Naupada, Thane

• Type of Enclosure: IP 54, IP 65 or, Flameproof
• Conductivity Range: 0 to 2000 micros/cm
• Sensing Electrode: In SS316 construction with PTFE insulation
• Process Connection: 1/2
• Temperature Compensation: Can be provided

EHEDG and FDA certified Online Conductivity Transmitters are used in pharmaceutical Companies where there is a need to check the conductivity of the flowing or, stored liquids to maintain the quality of their product. Using the suitable controller and the suitable control valve, conductivity of the liquid can be  controlled.

• Material: Metal
• Driven Type: Electric
• Power: 1-3kw
• Voltage: 220V
• Weight: 40-50kg
• Warranty: 1year
• Country of Origin: India

As you must know Rain Water Harvesting - is the activity of collection of water. It can be either store for direct use or can be recharged into the ground. As studied above, while dealing in second part of the definition that – “it can be recharged into the ground”. Resistivity test is the key factor. As we know the underground strata broadly it is - soil then Murom layer next is the Hard Murom & then the Basalt or in some cases it is marine clay & basalt.

We are offering fully automated line leakage tester: model-model 620l. the linechek® model 620l is a fully automated line leakage tester that can be configured to perform 8 of the most commonly required line leakage tests. The 620l has the most common measuring devices (md's) already incorporated into the instrument and can perform patient lead tests with an optional scanning matrix. The 620l also features a continuous run capability which allows the dut to be run without shutting down between line leakage tests. This remains true even in reverse polarity conditions. With advanced features and capabilities the 620l can measure the voltage drop across measuring devices for compliance to iec60065 and iec60990, record the maximum rms or peak leakage current during a test, and comply with iec60601-1 for ac, dc, and ac+dc leakage measurements. When configured with an optional run test feature, the 620l can also monitor minimum and maximum readings for voltage, current, watts, power factor, and leakage current. ethernet, usbrs-232 or gpib communication interfaces allow for the automated control of the instrument. most required for electrical safety compliance.

Regulated Parking and Traffic Management will install the required signs to show that unauthorised vehicles parking there will be clampedtowed away We will then monitor your car park private land or road, and also respond to your call for unauthorised parking offenders. We will wheel clamp and eventually tow away the offending vehicle working within the rules and guidelines provided by the Security Industry Authority and your instructions. Wheel clamping has proven the most effective tool in providing a parking control solution. Akme Security Ltd provides licensed clamping to its clients. All staff employed have attended training courses and meet the stringent requirements to obtain an SIA license that is now a legal requirement. This gives our operatives the knowledge and confidence to deal with all aspects of conflict management and customer service. All vehicles that are clamped are photographed using digital cameras to help prevent disputes and avoid claims being made against us. Our clamping units can operate on a call-out only basis or regular visits can be arranged to patrol your site and reduce illegal parking.

Lcr Meter, digital lcr meter, Led Dome Lights

Alcohol tester is a kind of tester designed to measure concentration result of the breathed alcohol in the human body.   Main Feature:-   Advanced Flat surfaced alcohol sensor Quick Response SMD assembling, stable performance Smart MCU control Direct testing process LCD indication Digital LCD display with light blue backup Audio warning beyond pre-set limit Sensor fault self checking   Technical Data :-   Sensor Type : Flat surfaced alcohol sensor Detection Range : 0.00- 0.20 BAC%; 0.00~2.00g/L; 0.00-2.00BAC%; 0.00-1.00mg/L; 0.00-200mg/100mL Alarming Level: 0.05BAC%; 0.50g/L; 0.50BAC%; 0.25mg/L; 50mg/100mL Accuracy: +-0.02%BAC at 0.05%BAC

"Classic Scientific” makes Laboratory Environmental Test Chambers, which are designed to suit the multi- application in the growing field of Medical, Agricultural, Industrial, Research Laboratories, Metal Treatment, and Various Industries. Our offered Environmental Test Chamber has carved an edge in international markets on the base o their apt functioning at low maintenance. These Environmental Test Chambers are also helpful in maintaining the climate conditions, which is one of their unique features. Traits :- Temperature + 100C to 600CHumidity (R.H.) 40% R.H. to 95% R.HDigital Display Electronic Temperature cum R.H(Humidity) Controller with an accuracy of +/-0.50C & +/-3% R.HMild Steel Powder Coated / Stainless Steel Matt Finish Used at :- MedicalAgriculturalIndustrial Research LaboratoriesMetal Treatment Specifications :- ModelsCS-03aCS-03bCS-03cCS-03d ChamberVolume90.0ltrs.170.0ltrs.285.0 ltrs.340.0ltrs. CubicFeet361012 Internal Size cms.40 X 40 X 5750X 40 X 8557X 57 X 8860X 60 X 95 ExternalSize cms.53X 68 X 13563X 68 X 16370X 85 X 16673X 88 X 173Shelves2233 Range+ 100C to 600CController Accuracy+/-0.50C of set value for Temp./ +/-3% R.H. (Humidity)Uniformity+/-1.00C for Temp +/- 3% for HumidityAir Heater ElementSpecial Type S.S. Tubular Air Heaters with fins.Heat up Time30 min. up to 600C without load.Cool Down time30 min. upto + 100C without loadCoolerPlate Fin CoolerCompressorHermetically Sealed Brand New Kirloskar CompressorControllerDigital Display Electronic Controller.SensorPt-100 for Dry & Wet Bulb / Capacitor type for Humidity.Internal ChamberStainless Steel 304 / 316L quality.ExternalMild Steel Powder Coated / Stainless Steel Matt Finish.InsulationBodyPuf 50mm / Glass Wool 65mmDoorThermo Cole.Inner Acrylic DoorInner Full Size Sea through Acrylic 8 mm thick.CirculationMotorizedBlower from backAirCirculation Motor1/12 Hp, 1440 R.P.M.Steam Injection SystemI.S.I. Mark Kettle HeaterWater tank Cartridge Reservoir4 ltrs4 ltrs9 ltrs9 ltrsBoiler4 ltrs4 ltrs9 ltrs9 ltrsWater qualitypH6.2 to 7.2Safety DeviceWater Level alarmOptionalImported Sensor0 to 100% R.H., Accuracy of +/-2%Computer InterfaceRS 485 / RS232 interface for multiple / single communication port.Safety DeviceThermostator Energy Regulator.  Over heating or humidity soft alarm.CyclicTimer0to 24 hrs X 7 days cyclic ON / OFF timer for illuminating condition.Capacity(watts)2000275032503750PowerConsumption9amps12 amps14 amps17 ampsNetWeight85 kgs90 kgs105kgs117kgsElectricrequirements AC230 V & 50 Hz cycle.

Used for conductivity, salinity, TDS and temperature measurements of high accuracy for work    in the field and in the laboratory. * Newly introduced function is the resistivity measurement of the tested liquid. * Salinity measurement in NaCl or KCl based on real characteristics. * Defining the TDS (Total Dissolved Solids) based on conductivity measurement. * Wide measuring range enables measurements in ultra pure water, natural water as well as in    very salty solutions. * 6 sub-ranges switched automatically. * “HOLD” function to freeze the result on the display. * Signalisation of the result stabilisation “READY” with symbol and sound. * Wide range of α coefficient 0 to 10 % / °C chosen depending on the measured solution. * In case of measurements of natural water with conductivity from 60 μS/cm to 1 mS/cm    the meter enables using non-linear temperature compensation. The parameters of this type    of water is determined in norm EN27888:1999 and concerns surface waters, deep water    and well water. This solution lowers the measurement error. * The measurement accuracy of the ultra pure water with temperature compensation    was increased by automatic adjustment of the α coefficient depending on the kind of    trace contaminations and temperature. * Calibration by entering the constant K of the cell or in standard solutions in 1 to 5 points. * Possibility of sending to a PC a report of calibration - up to 10 last calibrations. * Possibility of changing the reference temperature value. * In set with high accuracy conductivity cell ECF-1. Measuring range 0 to 500 mS/cm sufficient    for measurements in ultra pure water and high salt concentration samples. Metal electrodes    are easy to clean and PVC body protects it against mechanical damages. * Ability to store constants K of three cells, which cover the whole conductivity range. * Possibility to measure electric admittance of tree seedlings – checking the vitality of seedlings    with a special sensor. * Equipped with an easy-to-read back-light LCD display with brightness control. * Internal clock with date. * Internal data-logger - storing up to 4000 measurements taken singly or in series with    time, temperature and date all data stored in non-volatile memory. * Storing the date of next calibration and reminding it in the right moment to the user. * Possibility of connecting with a PC by micro USB connector * Software for data transmission and collection delivered in set. * Powered with rechargeable batteries, or power adapter with USB - micro / USB cable. * Waterproof housing (IP-66) facilitates working in difficult conditions.

A cylindrical Main capsule fitted with powerful magnet, which moves up & down alongwith the level rise or fall. This movement will be magnetically coupled with the follower Red indicator outside the chamber which is enclosed in the glass tube.MOC - C.S./S.S. 304/ SS 316/ PP/PVDF/PTFERange - 250 MM - 3000 MMConnection - 100 NB & 150 NB, Flanged typeFloat - SS-304/316 L, Glass, HDPE, PP, PVDF, PTFE ECTFE / HalarcoatedApplication - Suitable for hazardous, expensive, poisonous & flammable liquids. Option : Can be provided with level transmitter & with or without HART-Protocol We are one of the foremost manufacturers and suppliers of a comprehensive assortment of Side & Top Magnetic Level Indicator. Our range is appreciated for higher degree of accuracy, precision & compact design, durability and longer service life.. Side Mounted Magnetic Level Indicator: A cylindrical S. S. float fitted with powerful magnet, which moves up & down alongwith the level rise or fall. This float movement will be magnetically coupled with the follower Red indicator outside the chamber which is enclosed in the glass tube.MOC - C.S./S.S. 304/ SS 316/ PP/PVDF/PTFERange - 250 MM - 3000 MMConnection - 100 NB & 150 NB, Flanged typeFloat - SS-304/316 L, Glass, HDPE, PC PVDF, PTFE ECTFE / HalarcoatedApplication - Suitable for hazardous, expensive, poisonous & flammable liquids.Option - Can be provided with level transmitter with or without HART-Protocol.

• Range: 300 mm to 6000 mm.
• Temp. Rating: 150 Deg C.

Magnetic level indicators are used to measure the level of fluids. Fabricated using superior quality basic material by employing advanced machinery and sophisticated tools, these products compiled to the defined parameters of the industry in an efficient manner. These magnetic level indicators are mainly used in the hazardous pressurized vessels. Therefore, customers can avail these offered products from us in multifarious sizes and specifications as per their requirement.

If the gd is not proper then exchange line cards can not be protected from surge voltages. This is a specialized machine for testing pouyet krone e10b ipm g.d. Tube.

• Brand Name: AVI
• Accuracy: 0.5 percentage of full scale
• Voltage: 240 V
• Application: Laboratory
• Power Source: Electric
• Usage/Application: Laboratory
• Material: SS
• Display Type: Digital

We are offering environmental test chamber with Leak proof positive locking arrangment for door. Chamber illuminated with bulb.

Digital Torque Tester, Torque Analyzers, Magnetic Powder Brake

Energy Meter, Barcode Label, pressure sensitive labels, Stickers

line testers, board band line testers, Mini Cable Fault Locator

Side Mounted Magnetic Level Indicator, Conical Basket Strainer

telecom testing equipment

Tube Tester

Local Line / Broadband / ISDN Line Tester

battery monitors, battery management systems, Line Of Sight Surveys

pH Meter, electronic microcontroller, Rgb Controller

Current Datalogger, rotating vane anemometer