Testing Equipment Dealers in Wagle Estate, Thane

• Weight: 150g
• Accuracy: +0.4 Ml/min Or 2.5 %
• Brand Name: PCI
• Size: 68 x 130 x 30 mm
• Model Name/Number: DFM 05
• Batteries: Yes
• Usage/Application: Laboratory
• Warranty: 1 Year
• Resolution: 0.1 ml/min
• Measure Range: 0 to 500ml/min

This is very low cost and easy to operate model is the most basic form assessing fabric quality and ideal for small warehouse, garment and retail unit for Data Logger For Fabric Inspection Machine. Features: Suitable for all kind of fabrics Variables speed 5- 50 Meters / Min Full Forward & Reverse run Top and Bottom Illumination Mechanical Counter Meter Optional: Auto Stop at Feed Electronic Counter Meter Foot Switch Control Wide Measuring Scale

Battery monitor is one of the accessories of DC system used in power systems. It monitors battery's voltage on line. It adopts modular design that makes both installation and maintenance convenient. Its embedded mini processor can be set according to battery performance. It is able to monitor two sets of independent batteries with different parameter settings. It has an Adopting relay without contact that ensures high reliability.

A float containing magnets moves with changing liquid level, in a non-magnetic, non-fragile chamber. Magnetically coupled follower (Indicap) or bi-coloured Rotocylinders (Rotocyl), indicate the level externally on a calibrated scale.   What’s Special * Non fragile Metal Chamber* Rotocyl / Indicap Follower (Please select)* Magnatrans Add-On Transmitter - IS 5780 - Gr IIC* Magnalatch Steplessly Adjustable Add-On Limit Switches

• MOC: SS 304, SS 316, SS 316L, PTFE Lined
• Temperature Max: 200º C
• Pressure Max: 5 kg/cm 2
• Length Max: 10 Meters
• Connection: Flange Type OR Screwed Type
• Additional Attachment (If required): Level Switch (For HI – LOW)

(Model : L-11/ L-12 )    Put an end to common problems of conventional U-seal like Contamination of main liquid, Dangerous liquid spilling over tank top, Dangerous vapour escape when sealing liquid is blown out sucked in during transfers.Vapour sealed concept for vapour isolation in float & board type level indicator - Superior & Alternative advantages Absolute vapour tightness, Clean installation, No sealing liquids Trouble free service, Suitableeven for reacting liquids like HCL, HNO3, NH4OH, etc.

• Application: Laboratory
• Brand Name: Aplab
• Input resistance: 1M
• Bandwidth: DC to 6 MHz.
• Input Capacitance: 150pF
• Working Voltage: 500 V

A very useful joint testing equipments, to check tube expanded and welded joints between Tube and Tube sheet. To operate the Joint Tester is inserted into the tube for seal to expand with a push of a button. Vacuum is created between two seals, one expanded into the Tube ID and other seal covering Tube OD. Tube joint leak, if any, is detected as the vacuum shown on the gauge starts dropping. A very versatile tool to cover tubes of sizes from ¾” to 1. ¼” OD by a simple change of a set of manifold and seals.

The Ultrasonic Leak Detector (ULD) is a hand-held, high quality instrument that can locate costly leaks ina compressed air system. A person using the ULD need only aim it in the direction of a suspected leak. When a leak is present, an audible tone can be heared with the use of the headphones, and the LED dispaly will light. Testing the various unions, pipes, valves and fittings of a complete installation can be done quickly and effectively at distances up to 20' (6.1m) away! Plants that aren't maintained can easily waste up to 30% of the compressor output through leaks that go undetected. Saving the wasted compressed air reduces overall operating costs.  

• Display: 16 X 1 Alpha-numeric LCD Display With Backlight
• Models: P-181 or. F-181
• Type of Meter: Insertion Paddle Wheel type Velocity Meter
• Max. % of Solids: 1% of fluid volume, non-abrasive, non-magnetic, <100 micron in dia. & length
• Mounting: Field or, Panel
• Pressure drop: Less than 0.1 bar
• Pipe Line Size: Min. 15 Mm Up to 500 Mm
• Pulses: 4 Pulses each rotation
• Accuracy: +/- 1% of Full Scale if velocity is more than 0.5 m/s
• Repeatability: +/- 0.5%
• Linearity: +/- 2% of full scale
• Enclosure: Weather proof IP 65
• Gland: PO7
• Fitting Material: ABS, SS304 or, SS316
• Fitting Type: Threaded, Flanged, Weld on Adaptor
• Velocity Range: From 0.5 to 5.0 Mps
• Max. Operating Temperature: 60°c for Pp Sensor with Abs Fittings & 100°c for Ss Sensor with Ss Fitting
• Sensor Cable Length: 0.5 mtrs for Field Mounted Meter & 3 mtrs for Panel Mounted Meter
• Paddle: PVDF (Magnetic up to 100°C & Non Magnetic up to 80°C)
• Indicator Housing: Polycarbonate
• O-rings/Pin: Viton / Hastealloy C
• Sensor Rod: PP or, SS316
• Indicator unit dimensions: 110 mm (H) X 110 mm (W) X 150 mm (D)
• Field selectable Units: MPS
• Supply: 230 V AC +/- 15%, 50 Hz
• T Fitting: it is Compulsory with Pp Or, Ss 316 Flow Sensors (selection from Type of T-fittings)

Regulated Parking and Traffic Management will install the required signs to show that unauthorised vehicles parking there will be clampedtowed away We will then monitor your car park private land or road, and also respond to your call for unauthorised parking offenders. We will wheel clamp and eventually tow away the offending vehicle working within the rules and guidelines provided by the Security Industry Authority and your instructions. Wheel clamping has proven the most effective tool in providing a parking control solution. Akme Security Ltd provides licensed clamping to its clients. All staff employed have attended training courses and meet the stringent requirements to obtain an SIA license that is now a legal requirement. This gives our operatives the knowledge and confidence to deal with all aspects of conflict management and customer service. All vehicles that are clamped are photographed using digital cameras to help prevent disputes and avoid claims being made against us. Our clamping units can operate on a call-out only basis or regular visits can be arranged to patrol your site and reduce illegal parking.

• Material: Metal
• Driven Type: Electric
• Power: 1-3kw
• Voltage: 220V
• Weight: 40-50kg
• Warranty: 1year
• Country of Origin: India

• Range: 300 mm to 6000 mm.
• Temp. Rating: 150 Deg C.

Magnetic level indicators are used to measure the level of fluids. Fabricated using superior quality basic material by employing advanced machinery and sophisticated tools, these products compiled to the defined parameters of the industry in an efficient manner. These magnetic level indicators are mainly used in the hazardous pressurized vessels. Therefore, customers can avail these offered products from us in multifarious sizes and specifications as per their requirement.

metallurgical testing equipment, chemical equipment, Testing Equipment

• Range: 250 MM - 3000 MM

A cylindrical Main capsule fitted with powerful magnet, which moves up & down alongwith the level rise or fall. This movement will be magnetically coupled with the follower Red indicator outside the chamber which is enclosed in the glass tube.

If the gd is not proper then exchange line cards can not be protected from surge voltages. This is a specialized machine for testing pouyet krone e10b ipm g.d. Tube.

As you must know Rain Water Harvesting - is the activity of collection of water. It can be either store for direct use or can be recharged into the ground. As studied above, while dealing in second part of the definition that – “it can be recharged into the ground”. Resistivity test is the key factor. As we know the underground strata broadly it is - soil then Murom layer next is the Hard Murom & then the Basalt or in some cases it is marine clay & basalt.

Battery Monitoring System, Ups, Solar Inverter, kvm switches, Server Rack

Single Trace Oscilloscopes, LED Bulbs, Led Panel Light, led bulb

Led Dome Lights, testing measurement products lcr meters

Range - 25NB To 300NB. Inbuilt Pressure and Temperature Compensation Extended Neck for High Temperature Application Integral and Remote Electronics Available End Connection - Flgd / Sandwitch / Insertion Type also Upto 2mtrs Pipe ID Material of Construction - 55 304/316 NIBR

Clamp Meter, Flow Nozzle, pH Meter, Industrial Stirrer, Furnace

Torque Analyzers, Magnetic Powder Brake, Tension Brake, power brakes

testing measuring equipment

Power Control Monitoring, Uninterruptible Power Supplies, Outdoor Enclosures

electrical meters, electrical towers, electrical transmission lines

battery monitoring, Transfer Switch Monitoring

line testers, board band line testers, Mini Cable Fault Locator

electro energy meters, Transformers

Fls-03 Level Switch, FLS-04 Level Switch, FLS-05 Level Switch

Current Datalogger, rotating vane anemometer