Testing Machines Dealers in Thane

This range of test systems meets practically all the requirements of metals and composites testing for strength, durability and toughness. It is backed up with a wide choice of appropriate application software, transducers and accessories that satisfy the requirements of most standard test practices applicable to such tests. These accessories include room and elevated temperature testing of metals for tension and compression properties, low and high-cycle fatigue, fracture and fatigue crack growth, testing of composites under ambient and controlled environment for shear, tensioncompression and fatigue and testing of joints and fasteners for strength and durability under a wide range of loading conditions, including constant amplitude, programmed block loading and simulated service loading.

• Type: Universal Testing Machine
• Certification: Iso 9001:2008
• Application: Testing
• Country of Origin: India
• Brand Name: LINUX

micro pc model with twin load cell

Multi-media abraser provides a reproducible method to measure the relative abrasiveness of most fluids, powders, pastes and semi-solids. used in conjunction with the taber rotary abraser, the multi-media abraser is valuable to characterize how these mediums cause wear when they come in contact with different components.

We manufacture varuious dynamo meters, viz, Eddy Current Dynamo meter, Eddy current Retarder, Eddy Current Brake, Powder Dynamo meter, Tandem Dynamo meter, pneumatic dynamo meter, etc.Gear box out put Torque, Speed, Out Total Mechanical output POWER is displyaed on indicators, Our Proprietary APPSYS GEAR TEST software developed for gear transmission test to monitor & display Input Power, Output Power, Efficiency, Input Voltage, Motor No Load Current, Full Load Current, No Load & Full Load Speed, No Load & Full Load Torque, Power factor, Motor temperature, bearing temperature, winding temperature.    PC based Gear test set up, Window XP /Win7 operating systems, PC hardware, Core 2 Duo PC with built in RAM & PCI Card with necessary Digital & Analogue inputs & outputs, Power analyzer, Input Power (Motor Power Sensor to sense Motor Power -To monitor Motor electrical Input Power & for Calculation of efficiency) & Output Power, Speed, Torque, Efficiency are displayed on Monitor & stored in table & graphs in MS Excel format. PC Auto & PC Manual mode selector Soft push button switch on Monitor screen. In PC Auto mode, Data is captured on predetermined (Site settable) time & Torque Loading in 100 steps (independently settable), whereas in PC Manual mode – Data is captured manually by pressing data capture soft button on screen. Captured data is exported to MS Excel in Table forms & in Graphs form to show Torque-Speed characteristics, Torque-Current and Speed-Current, Efficiency characteristics, Torque-Speed Oscillations at steady state Torque at different temperatures, Temp measurements etc. & custom characteristics required by clients.

With more than 3 decades of experience in springs design, manufacturing and application engineering, we offer Springs for critical applications in engineering, power, automotive sectors and off-highway vehicles. We have mastered processing variety of spring steel & stainless steel materials by understanding material behavior, requirement of Heat treatment processes based on material grade and intended application to achieve high fatigue life. More than 50% of Raw Material is imported from Germany, Japan, Korea, Belgium etc. from OEM approved sources.

• Application: Testing Strength Of Material
• Weight: 400-500kg
• Automatic Grade: Automatic
• Driven Type: Electric
• Warranty: 2years
• Quality: Optimum Quality
• Display Type: Digital

Computerized Universal Testing Machine have a wide range of applications. A number of materials, metals in different form and shapes can be tested for variety of tests like Tension, Compression, Transverse, Bend, Shear, Brine Hardness etc. Special attachments are also available for testing of Flat Belts, Chain Links, Wire Ropes etc. Control Panel:  Hydraulic circuit - it consists of hydraulic power pack which has a directly driven radial plunger pump which gives a continuous non pulsating flow of oil pressure up to 250 bar. a pressure compensated needle type flow control valve is provided to control the oil flow to cylinder there by achieving a desired piston speed. Infinitely variable speeds an be obtained with help of valves. Optionally this can be controlled from electronic control system.Loading Rate / Straining Rate Control:  This is superfine controlling system which controls loading rate I straining rate as per commands from electronic machine control system. With UP / DOWN Keys on electronic control system loading ratel straining rate is adjusted. Fine UTM Software can send loading rate / straining rate to electronic control system.

Hoping to achieve 100% customer satisfaction, we as a well admired figure in the industry, put all efforts in delivering excellence. Valve Testing Machine is available in a wide range. Our quality is never compromised as it is designed under the strict administration of proficient professionals. Its light weight and efficient working make it an outstanding option. Get in touch to for bulk requirements.

• Max. Capacity (N): 1000
• Machine Dimensions: 650 X 500 X 1800

Shanta Engineering Universal Testing Machines are electro mechanical machines with digital display of load & displacement & pulley belt system for changing speeds. The machines are designed for testing various materials like rubber, plastics, cables, leather, paper, plywood and metals. Tension, compression, bend and flexural tests can be performed on these machines with suitable grips and fixtures. The machines are powder coated for elegant look. The critical components are plated for rust prevention and durability.

Compression Testing Machine 1000KN or 2000KN (100 Tons or 200 Tons) Capacity (Economy Channel Model) Hand Operated fitted with 15 cm dia load gauge. Designed for testing of Cement, Concrete Moulds of Various sizes 15cm x 15cm x cubes, 10cm x 10cm x cubes, 7.06 cm x 7.06 cm cubes, 15cm x 30cm cylindrical mould, bricks can also be tested by the help of adjustable hand wheel.

Produced using top-notch quality components and the latest technology, our Universal Testing Machines are high on counts of performance, reliability, durability, corrosion resistance and efficiency. Also, these products are known for low maintenance cost, smooth functioning and minimal power consumption. Place medium or bulk orders of Electrical Engineering Laboratory Equipment, we assure timely delivery across different parts of the country.

Tensile and Elongation as per ASTM – D638/ASTM – D882/ISO 527 Flexural as per ASTM – D790/ ISO 178 Compression as per ASTM – D695   Reference Standards: ASTM, ISO, IS Model: AE-UTM-1LC-FC   Specifications : → System Status: Computerized + Digital → Data Entry: All Data through software or From Console → Reports: Graphical + Data through software → Units: Kg, Newton, Pound, cm, mm & inch. → Data Merging Facility: Available → Load Cell: 1 no. (Others Optional) → Load Cell Supplied: 1000Kg with 100 grams resolution. → Resolution of displacement: 0.1 mm → Speed: 2 – 500 mm/min (others optional) *** → Machine Capacity: Up to 1000 Kg (Others Optional) → Tests: Tensile; Flexural; Compression → Reports Contain: Peak load, Break load, Elongation at peak load, Elongation at break load, Tensile      strength at peak load, Tensile strength at break load, % elongation at peak load, % elongation at break      load, Young’s modulus, Yield load, Yield stress, Flexural stress, Flexural modulus and Load Vs      Elongation graph. → Accessories: Heavy Duty Grip for Tensile – 1 Pair Flexural Attachment – 1 No Compression Plate – 1 Pair → Supply: 220 VAC/50 Hz → Power: 2 KW → Paint: Powder coated    

• Load capacity: up to 1000 kg*.
• Cross Travel: up to 1000 mm*.
• Speed: 2mm / minute to 500mm/minute.
• Power: 230 Volts, 50Hz, single phase.

No. of load cell : Two. Horizontal day light : 450 mm*. Paint : Powder coated. Direct display and printout through embedded controller: Peak load, Break load, Elongation at peak load, Elongation at break load, Tensile strength at peak load, Tensile strength at break load, % elongation at peak load, % elongation at break load, Young’s modulus, Yield load, Yield stress, Flexural stress, Flexural modulus, Compression strength and Load Vs Elongation graph could be obtained in different user selectable unit and format. Similarly average value and standard deviation could be obtained by merging different tests. Material Testing Machine

• Voltage: 230 - 280 V
• Material: Mild Steel
• Brand Name: Alfa
• Usage/Application: Cable Testing
• Packaging Type: Wooden Box
• Display Type: Digital
• Load Capacity: 10 -50 kN
• Frequency: 50 Hz
• Grade: Semi-Automatic

→ Reports Contain: Peak load, Break load, Elongation at peak load, Elongation at break load, Tensile strength at peak load, Tensile strength at break load, % elongation at peak load, % elongation . at break load, Young’s modulus, Yield load, Yield stress, Flexural stress, Flexural modulus and Load Vs Elongation graph. → Data Entry: All Data through software or From Console. → Reports: Graphical + Data through software. → Units: Kg, Newton, Pound, cm, mm & inch. → Data Merging Facility: Available. → Load Cell: 1 no. (Others Optional). → Speed: 2 – 500 mmmin (others optional) .*** → Machine Capacity: Up to 1000 Kg (Others Optional). → Tests: Tensile; Flexural; Compression.

Treadle operated, This machine to use for Leak proof Test of finished cans. Machine equipped with FRL to control the pressure to test the vaccum type of cans as OTS cans Aerosol cans and any type of Round cans.

• Voltage: 220 V
• Load Testing: 100 kg
• Body Material: MS
• Frequency: 50 Hz

• Model: ITM-300
• Display: Digital
• Pendulum drop angle for Charpy: 140 deg
• Pendulum drop angle for Izod: 90 deg
• Standard: ASTM: E-23
• Initial Potential Energy for Charpy: 300 Joules
• Initial Potential Energy for Izod: 170 Joules
• Least Count: 2 Joules
• features: Longer functional life, Least maintenance, Improved test accuracy, Dimensional accuracy, Robustness

The ST series Spring Load Testing Machines manufactured by us are low cost, user friendly & precise. Spring load testing machines are suitable for Tension as well as Compression Loads. Linear Bearing supported vertical movement of the rack-pinion arrangement makes testing the spring very easy. Further, it’s fast operation helps operator to check same spring multiple times or carry out batch testing much faster. Digital display for Load & Deflection.

• Capacity: 1,000 Nm
• Dimensions: 600x450x1800mm (WxDxH)

Digital Torsion Testing Machine is designed to perform Torsion Test on Insulator of varying heights and for similar application on other products. Multiple drive options are available to suit customer requirement.The applied torque is displayed digitally with facility to display peak torque at end of the test.T-slots are provided on the mounting table to fix insulators of varying base dimension. The vertical spacing between the base plate and the coupler is adjustable through motorized operation.

Digital Blood Pressure Testing Machine is used to check the blood pressure. Today many of our clients avail Digital Blood Pressure Testing Machine from us for both personal and medical use. Our fully automatic Digital Blood Pressure Testing Machine is extremely easy to operate and widely applauded for its perfect reading. We are offering Digital Blood Pressure Testing Machine in different specifications as per the requirement. Features Easy to use Fully automatic Long serving life Accurate reading

• Brand Name: PerkinElmer
• Features: Blend calculation, malt addition, moisture correction
• Model Name/Number: FN 1000
• No of USB Ports: 4
• Connectivity: 4 USB ports and one Ethernet port, printers, data capture connection, bar code readers and more
• Research Areas: Food & Agriculture

Material testing machines can analyze the whole testing result including elongation, stress, strain, break value and average value. It can also fit to different specimen shape or be required to destroy the specimen and record the entire testing process and analysis the physical features of the specimen like tension force, bending strength, wear-resisting, impact, torque force, abrasion, fatigue, hardness, peeling force, viscosity...etc. We also supply the specimen maker equipment like pneumatic specimen press, hardness specimen cutting device, electrical forming machine. These equipment can make the standard specimen to get precise result during test.  

Pendulum machines can perform resilience test on plastics, metals & high resistance sheets. Important features are motorized automatic lifting of the hammer after test which is useful in low temperature test.

• Carriage dimensions: 9"x9"
• Shock level: 3
• Stroke: 17"
• Terminal Velocity: 330 inch per second
• Cycling rate: 8 per minute
• Programming capabilities: 1 to 10 tests

The endurance testing machine manufactured by h.k.machinery are of one station or multiple stations i.e. For testing one sample or multiple samples at a time. Endurance testing machine are custom build machines as per once requirements the springs manufactured are desired to have certain characteristics which are redetermined.

We are one of the manufacturers of chlorine leak detectors with 4 - 20 ma transmitters. These are used in water treatment plants, waste water treatment plants, effluent treatment plants, sewage treatment plants etc.

foam tester, Abrasion Tester, multifunction rheometer, Resilience Tester

we can supplied all the type of workshop machines like radial drill machinery , lath machines ,welding machines ,grinding machines ,milling machines ,band saw machine, electric discharge machine,shearing machines, safety shoes , etc

zed duel oil testing machines, measuring machines