Ball Valves Dealers in M. G. Road, Thane

• Material: Monel 400 And Hestelloy C Material
• Certification: ISI Certified
• Weight: 5-10kg
• Color: Mettalic
• Feature: Corrosion Proof, Durable
• Type of Three Valve Manifold: R type, T type and H type
• Note: Mounting Bracket also can be provided for the manifolds

We manufacture various types of Manifolds. Manifolds are necessary during the maintenance of the instruments like Pressure Gauges - Switches & Transmitters, DP Gauges - Switches and Transmitters.

We have various type of level switches. Depending on the process medium (clear liquids, viscous medium, medium at high temperature, highly corrosive medium, medium containing solid or, magnetic particles etc.) and application details (cryogenic application, tank with agitator, explosive area), we advise the suitable type of level switch. For clear liquids we have magnetic float operated level switches, pp cable float level switches, conductivity level switches, vibrating fork level switches etc. For dry and free flowing powder, granules, pallets etc we have rotating paddle level switches, vibrating fork level switches, boot diaphragm level switches etc. For slurries and sticky mediums we have rf admittance level switch, low capacitance level switch, lbfs, lffs etc. For explosive areas, we have exproof level switches also.

• Size: 300 mm
• Material: Stainless Steel
• Connector Type: Screwed
• Country of Origin: Made in India
• Pressure: High Pressure
• Way: 3 Way

We are offering y type flush bottom valve

THREE WAY VALVE is ideal for blending two separate flows, by having two inlets and a common outlet, or dividing a flow into two proportional parts by having one common inlet and two outlets. Pressure Ratings:ASME class 150 to ASME 600 (PN 10 to PN 100) Other standards available on request. Application: For high temperature fluid and particularly for textile industries, to mix or divert fluids.   Features: Linear ‘V’ port flow characteristics High Flow Capacity Tight shut off. Leakage capability better than ANSI class IV & consistent with normal single seat valve High rangeability Bellows seal (leakproof packing) available Valve is used for mixing or diverting services depending on customers requirement Full range of body & trim materials Wide range of interchangeable trim size, to handle wide range of process parameters Option of inner or outer seated design minimises flow instability Constructed with heavy duty parts for longer life Various pneumatic diaphragm actuator options with accessories

Steel strong trunnion mounted Ball valves are designed and tested in accordance with API SPEC Q1 and spec 6D. The complete split body & fully welded design offers maximum protection against line pressure and thermal distortion with long life and trouble-free performance.

The Valves are designed to open directly in the tank, reactor for 100% Flushing or discharging the material. Easy Operation even under high pressures. Full circular passages. Easily replaceable PTFE seats & Packing. The design is featured with inclined bonnet which allows the automation OR manual operation to be free from fouling with the reactor disc end.

We offer specialty ball valves.

Servo motor double controller  Guided drive DGRF Radial gripper HGRC

• Size: ½” to 4” NB
• MOC: SS 304, SS 316, PVDF
• Connection: Screwed type / Flange Type

(Model : FV-20) Self operated Float Valve

TYPE of Valves : 2 way, 3 way, 4 way, 5 way, 1 piece, 2 piece, 3 piece Design.Quarter turn, Half turn, Full turn i.e. L Port 900, T Port ( full turn ) A Ball Valve Is A Valve With A Spherical Disc, The Part Of The Valve Which Controls The Flow Through It. The Sphere Has A Hole, Or Port, Through The Middle So That When The Port Is In Line With Both Ends Of The Valve, Flow Will Occur. When The Valve Is Closed, The Hole Is Perpendicular To The Ends Of The Valve, And Flow Is Blocked. The Handle Or Lever Will Be Inline With The Port Position Letting You "See" The Valve's Position. The Ball Valve, Along With The Butterfly Valve And Plug Valve, Are Part Of The Family Of Quarter Turn Valves. Types of ball valveThere are five general body styles of ball valves: single body, three piece body, split body, top entry, and welded. The difference is based on how the pieces of the valve—especially the casing that contains the ball itself—are manufactured and assembled. The valve operation is the same in each case. Duplex ball valveIn addition, there are different styles related to the bore of the ball mechanism itself:A full port or more commonly known full bore ball valve has an over-sized ball so that the hole in the ball is the same size as the pipeline resulting in lower friction loss. Flow is unrestricted but the valve is larger and more expensive so this is only used where free flow is required, for example in pipelines which require pigging.In reduced port or more commonly known reduced bore ball valves, flow through the valve is one pipe size smaller than the valve's pipe size resulting in flow area being smaller than pipe. As the flow discharge remains constant and is equal to area of flow (A) times velocity (V), A1V1 = A2V2 the velocity increases with reduced area of flowThree-way and four-way ball valvesSchematic 3 way ball valve: L-shaped ball right, T-shaped leftThree-way ball valves have an L- or T-shaped hole through the middle. The different combinations of flow are shown in the figure. It is easy to see that a T valve can connect any pair of ports, or all three, together, but the 45 degree position which might disconnect all three leaves no margin for error. The L valve can connect the center port to either side port, or disconnect all three, but it cannot connect the side ports together.Multi-port ball valves with 4 ways, or more, are also commercially available, the inlet way often being orthogonal to the plane of the outlets. For special applications, such as driving air-powered motors from forward to reverse, the operation is performed by rotating a single lever four-way valve. The 4-way ball valve has two L-shaped ports in the ball that do not interconnect, sometimes referred to as an "×" port.Ball valves in sizes up to 2 inch generally come in single piece, two or three piece designs. One piece ball valves are almost always reduced bore, are relatively inexpensive and generally are throw-away. Two piece ball valves are generally slightly reduced (or standard) bore, they can be either throw-away or repairable. The 3 piece design allows for the center part of the valve containing the ball, stem & seats to be easily removed from the pipeline. This facilitates efficient cleaning of deposited sediments, replacement of seats and gland packings, polishing out of small scratches on the ball, all this without removing the pipes from the valve body. The design concept of a three piece valve is for it to be repairable.....

steelstrong valves has extensive experience in manufacturing trunnion mounted, side & top entry ball valves, both soft and metal seated. size: 2” up to 56“ (dn 50 up to dn 1400) pressure rating: asme 150# to 2500# materials: carbon steels, low temperature carbon steel, martensitic steels, austenitic stainless steel, duplex stainless steels, super duplex stainless steels,alloys, nickel aluminum bronze, hastelloy, inconel, titanium alloy & carbon steel with internal corrosion resistant alloy (cra) overlay design standard: api 6d,api 608 pressure / temperature rating: asme b 16.34 test (inspection) standard: api 6d,iso 5208 api 6fa,iso 10497, api607, bs 6364 construction details: single / two / three piece design / side entry end connection: flanged,butt-weld operator / actuator: lever, gear, actuator (pneumatic, hydraulic, electro-hydraulic and electric motorised) special design feature also available: cryogenic design subsea design stem extension single & double piston seat design primary metal and secondary soft seat design emergency seat and stem sealant injection .

• Material: Metal
• Application: Gas Fitting, Oil Fitting, Water Fitting
• Pattern: Plain
• Condition: New
• Feature: Easy Maintenance.
• Automation Grade: Manual
• Number Of Way: 2way

We are the main supplier of this product.

electric valve, Loading Arms, Swivel Joints, Hydrant Valve, Disk valve

Mini Ball Valve, Ball Valves, Flanged Ball Valve, power cylinder

Ic Ball Valve, Valve, Ball Valve, ss ball valves

Ball Valves, Bellow Sealed Valves, Lined Butterfly Valves, Gate Valves

Ball Valves, Control Valves

Ball Valves, Needle Valves, Hydraulic Valves, hydraulic pneumatic fittings

Metal Cryogenic Valves, Flush Bottom Bellow Seal Valve