Ball Valves Dealers in Thane West, Thane

• Material: Carbon Steel
• Application: Water Fitting
• Feature: Casting Approved, Durable
• Pack Type: Carton Box
• Standard: BS EN ISO 17292

Manufactured as per BS EN ISO 17292. These valves are of three piece design. The end connection is socket weld. The body is made of carbon steel and the ball is made of Hastelloy “C” / Monel 400. The stem is bottom entry, providing maximum safety. This design ensures that stem blow-out does not take place, safe guarding personnel working in its vicinity and preventing chlorine gas from leaking out.

A GOGGLE valve is designed to isolate several components of FCC and Expander Units. Applications for this type of valve are Expander Outlet Line, iron & steel industries, petrochemical & refining industries, energy industry & environment protection, equipment of the glass industry. A goggle valve is an isolation valve suitable for installation in any orientation - horizontal, vertical or inclined. Goggle valve we can provide casing & encase type.CHEMTECH's goggle valve actuating process can be summarized as follows:• The hydraulic power unit - controlled by a local push button or by a remote control system - provides the energy to allow the retracting action of a set of cylinders connected in parallel and acting on the valve retaining ring. Hydraulic Units are available with Manual or fully Automatic Control.• A retracting action, provided by the parallel of hydraulic cylinders, unclamps the disc and allows its movement to close or to open the valve. Limit switches are installed to detect the complete disconnection between disc and retaining rings and give a permissive for the valve operation.• The motor operation applies a rotation to a bevel gear that applies a rotation to a kinematic chain. This system allows the internal gears to rotate.• The disc slides from a position to another (from valve opened to closed or from valve closed to opened) thanks to rack/pinion movement. Motor rotation is automatically stopped by a go switch signal, to indicate the total stroke.• Actuation of the cylinder pistons firmly clamps the disc in reached position and sealing rings on the clamped disc portion and on the telescopic protective tube prevent any leakage for a perfect seal. This Design Guarantees:• Wear free traverse of the plate through the valve body as the plate rings are retracted to provide a positive clearance.• Valve tightness provided by axial pressure of the movable body sealing seat onto the movable plate ring (closed disc or open ring)• and consequently onto the fixed body sealing seat, with the flexible springs providing a self-aligning feature.• Especially Suitable for Extreme Operating Conditions, Such as:• No jamming of valve plates not even under extreme operating conditions.• Man-safe shut-off in accordance with safety regulations.• Shut-off of clean and dust-laden gaseous media.• High operating temperatures in insulated or cooled design.• Temperature fluctuations.• Short closing and opening time• Nominal diameters up to 4000 mm (160 inch)

We are a chief Manufacturer, Exporter & Supplier of Three-Way Valves. The Three-Way Valves are fabricated by our expert technicians using cutting-edge techniques and premium quality material. The Three-Way Valves we offer are strong, durable, dimensionally accurate and highly useful. Sizes : 1/2" to 12" (Higher sizes available on request) Ratings : ANSI 150 to ANSI 600 and NP 10 to NP 100 (Other standards available on request) Features High Flow CapacityLeakage capability better than ANSI class IV and consistent with normal single seat valveHigh rangeabilityLeakproof packing is available on requestValve is used for mixing or diverting services depending on customer̢۪s requirement Application : For high temperature fluid and particularly for textile industries, to mix or divert fluids

Ball valves A Ball valve is a quarter-turn rotational motion valve that uses a ball-shaped disk to stop or start flow. If the valve is opened, the ball rotates to a point where the hole through the ball is in line with the valve body inlet and outlet. If the valve is closed, the ball is rotated so that the hole is perpendicular to the flow openings of the valve body and the flow is stopped. Types of Ball valves Ball valves are basically available in three versions: full port, regular port and reduced port. The full-port valve has an internal diameter equal to the inner diameter of the pipe

Ball Valves, p7-iefl-225 led emergency lights

blow down valve, Ac compressor valve, Breather Valve, Venturi valves

Ball Valves, Globe Valves, Butterfly Valves, Plug Valves, Check Valves

TITANIUM BALL VALVES, loop fastener

Ball Valves, y type angle piston valves, Solenoid Valves

ptfe ball valve, pipe bellows, Pipe Flanges, Pipe Reducer, PTFE Gaskets