Butterfly Valves Dealers in Thane

we are offer wide range of butterfly valve-005, e.g. cast iron butterfly valve, cast steel butterfly valve, stainless steel butterfly valve, wafer type butterfly valve, lug & semi lug type butterfly valve, flanged end butterfly valve, spherical disc butterfly valve & more.

Quality control is a huge part of our company and we make sure, all our products are quality assured and trustworthy. Located in Thane(India), we have marked our presence as a distinguish Supplier since our products are qualitative and timely delivered.

• Country of Origin: India
• Size: 1.1/2inch, 1.1/4inch, 1/2inch, 2inch, 3/4inch, 1-48inch
• Type: Wafer Butterfly Valve
• Material: Carbon Steeel, Cast Iron, Stainless Steel
• Certification: ISO 9001:2008 Certified
• Application: Water Fitting
• Color: Blue, Sky Blue
• Feature: Blow-Out-Proof, Casting Approved
• Technics: Gear Operated
• Power: Manual
• Pressure: Triple Offset Butterfly Valve
• Structure: Double Half Shaft
• Number Of Way: 2way
• Brand Name: L&T , AUDCO ,
• Media: WATER , STEAM , GAS , OIL ETC
• Temperature Of Media: 0- 200
• Type: BUTTERFLY VALVE
• Size: 50MM - 1000MM
• Brand: AUDCO , L&T

• Material: Carbon Steeel, Stainless Steel
• Technics: Hard Sealing
• Power: Hydraulic, Solenoid
• Pressure: 1000 Kpa
• Structure: Double Half Shaft
• Port Size: 5cm-60cm

We are offering Pneumatic Actuated Butterfly Valve

• Material: Carbon Steeel, Cast Iron, Stainless Steel
• Certification: ISO 9001:2008 Certified
• Color: Blue, Sky Blue, White
• Number Of Way: 2way
• Brand Name: UTVC
• Size: 4/5
• Technics: Gear Operated
• Power: Manual

Butterfly valve high proformance SS 304/316 seat PTFE Wafer Type Manual Gear Operated ASA 150,PN10,PN16 Application: Gas, Oil,chemicals plant, Acid, processe industries,Textile mills, Water line,

• HYDRAULIC TEST PRESSURE: BODY
• 15 Kg/cm2 (g): SEAT
• 10 Kg/cm2 (g): AIR TEST
• SEAT: -
• PARTS  :   MATERIALS
• Body  : CAST IRON / WCB / SS 304 / SS 316 (Investment Casting)
• Disc   :  ASTM A 351 Gr. CF 8 / CF 8M
• Seal  : Elastomer
• Spindle: AISI 410 / SS 304 / SS 316
• Pin: AISI 410 / SS 304 / SS 316
• Ratchet: Cast Iron
• handle: Cast Iron
• Cap :  Mild Steel
• Seal: -s Nitrile / Neoprene / Butyl / Epdm / Silicon / viton 
• APPLICABLE  STANDARDS: FACE TO FACE – API 609
• MFG. STD – BS 5155: TESTING STANDARDS -API 598

• Series N: 301
• Design: As per BS 5155/ API 609
• Valve Size & Rating: 50 Mm to 600mm Ansi 150# (higher Size Available On Request)
• End Connection: Wafer Type
• Body Material: Carbon Steel, Stainless Steel, Monel, Hast-alloy B/c, Alloy 20 Ect.
• Vane Material: Stainless Steel, Monel, Hast-alloy B/C, Stallite ect.
• Body Sleeve Material: Nitrile , Silicon, EPDM, PTFE ect.
• Flow Characteristics: ON-OFF/ Throttling.
• Seat Leakage:: As per FCI-70-2 (ANSI B 16.04) API 598
• Actuator Form:: Diaphragm, Rotary, Cylinder.
• Operation: Manual, Gear, Pneumatic & Electrical

• Country of Origin: India
• Material: Mild Steel
• Certification: ISO 9001:2008 Certified
• Application: Water Fitting
• Feature: Blow-Out-Proof, Casting Approved, Durable, Investment Casting
• Port Size: 0.1mm-5cm, 2cm-50cm

We are one of the most affluent importers of automatic valves. The range of valves that we deal in includes products manufactured by the companies like audco (l&t). The types of valves that we deal in include ball valves, butterfly valves, nrv, gate valves, compressor valves etc. All the valves available with us are of the superior quality manufactured form the finest quality raw material. In addition to it, these valves have really long life. These features have contributed in our success as the foremost valves suppliers of india.

We are the exporter and supplier of this products.

We introduce ourselves as one of the prominent Manufacturers and Suppliers of highly-efficient Butterfly Valve. We manufacture these Butterfly Valves to suit specific customer requirement. Butterfly Valves are made available in both Wafer and Flange types. A collection of soft seated Butterfly Valves with various soft seating arrangements are also manufactured which suits almost any process requirement. Highlights : Long service lifeDimensional accuracyRobust constructionExcellent packaging

We are a notable Manufacturer, Exporter & Supplier of Butterfly Valves. We offer Butterfly Valves (Series 4000) that are engineered to perfection by our expert technicians. The Butterfly Valves supplied by us are known for their rigid construction, excellent performance, high functionality and reasonable prices. Sizes : 2" to 36" Ratings : ANSI 125 to ANSI 300. Features Wafer style connectionConcentric design as standard, offet design for special applicationsMetal to metal or sleeved type constructionChoice of various rubber of PTFE sleevesTight shut off with rubber sleevesMinimum obstruction for flowing mediaHigh flow capacitySimple & Light construction Application : Steel, Sugar and textile industries and especially for fluid containing slurry particle. Used for on-off as well as control applications.

Resilient seated Butterfly Valve Minimum Wear Of Rubber Lining During Opening Closing. Reliable & Effective Tight Shut-Off, Suitable For Vacuum Application.

Pressure Ratings : Upto 2500 Class Mgf. Standard : API 600 Testing Std. : API 598 Material : ASTM A216 Gr WCB/ASTM351CF8/ ASTM351CF8M/ASTM351CF3M/ Customize

We are engaged in manufacturing wide range of specially designed Hand Lever Valves using superior quality raw materials. These Hand Lever Valves are corrosion resistant, durable and are applicable as hydraulic machines which can be made available to our clients as per their requirements. The Hand Lever Valves produced by us comprises of a manual lever that is a push or pull lever. Features : Long lastingRust freeAir filtered and lubricatedPowder coated aluminium body Sizes Available : 1/4" BSP1/2" BSP Pressure : 0 to 10 kg /cm2

A Butterfly Valve is a Valve which can be used for isolating or regulating flow. The closing mechanism takes the form of a disk. Operation is similar to that of a ball valve, which allows for quick shut off. Butterfly Valves are generally favored because they are lower in cost to other valve designs as well as being lighter in weight, meaning less support is required. A Butterfly Valve Is A Valve Which Can Be Used For Isolating Or Regulating Flow. The Closing Mechanism Takes The Form Of A Disk. Operation Is Similar To That Of A Ball Valve, Which Allows For Quick Shut Off. Butterfly Valves Are Generally Favored Because They Are Lower In Cost To Other Valve Designs As Well As Being Lighter In Weight, Meaning Less Support Is Required. The Disc Is Positioned In The Center Of The Pipe, Passing Through The Disc Is A Rod Connected To An Actuator On The Outside Of The Valve. Rotating The Actuator Turns The Disc Either Parallel Or Perpendicular To The Flow. Unlike A Ball Valve, The Disc Is Always Present Within The Flow, Therefore A Pressure Drop Is Always Induced In The Flow, Regardless Of Valve Position.A Butterfly Valve Is From A Family Of Valves Called Quarter-Turn Valves. The "Butterfly" Is A Metal Disc Mounted On A Rod. When The Valve Is Closed, The Disc Is Turned So That It Completely Blocks Off The Passageway. When The Valve Is Fully Open, The Disc Is Rotated A Quarter Turn So That It Allows An Almost Unrestricted Passage Of The Fluid. The Valve May Also Be Opened Incrementally To Throttle Flow.There Are Different Kinds Of Butterfly Valves, Each Adapted For Different Pressures And Different Usage. The Resilient Butterfly Valve, Which Uses The Flexibility Of Rubber, Has The Lowest Pressure Rating. The High Performance Butterfly Valve, Used In Slightly Higher-Pressure Systems, Features A Slight Offset In The Way The Disc Is Positioned, Which Increases The Valve'S Sealing Ability And Decreases Its Tendency To Wear. The Valve Best Suited For High-Pressure Systems Is The Triple Offset Butterfly Valve, Which Makes Use Of A Metal Seat, And Is Therefore Able To Withstand A Greater Amount Of Pressure

• Flanged Ends: : To Suit ANSI B 16.5 / BS-10 TABLE / DIN / IS STD
• Valve Design: : BS 5155 / API 609
• Valve testing: : BS 6755 / API 598
• CAST IRON: : IS 210 FG 200
• CAST CARBON STEEL: : ASTM A 216 WCB / WCC WITH SS 410 / SS 202 / SS 304 TRIMS
• CAST STAINLESS STEEL: : ASTM A 351 Gr CF-8 / CF-8M/ CF-3 / CF-3M / CN-7M/
•  :   HAST ALLOY & OTHER AVAILABLE METALS

We are offering butterfly valve. Butterfly valve is a cheaper & better option for in line onoff applications. To some extent it is also being used for the throttling flow control purpose. “ive” is a leading butterfly valve manufacturer. And supplies wide range of butterfly valve in standard as well as custom requirement. Key Features and Benefits of High Performance Butterfly Valve Butterfly Valves are available in size range from 1 ½” (40mm) to 24” (600 mm) Valves are rubber seated with Metal disc to ensure Tight shut off. The Rubber seating can be Provided in both Renewable as well as molded forms. Flanged Butterfly valve is concentric in design & can be sandwiched between Flanges of ASA 150# / 300# / BS 10 Table “D” / “E” / PN-10 / PN-16. Available with a variety of On/Off variants such as Manual and Geared operated. Automated valve solution with actuated butterfly valve. Rotary Quarter Turn Single acting or Double acting Actuators, with other accessories such as Solenoid valves, Limit Switches, Positioners, Manual Overrides . Butterfly valves are supplied with Pneumatic or Electrical Actuator. Available in Wafer type butterfly valve and Sanitary Butterfly valve with Triclover Ends. “IVE” Supplies soft seated Butterfly valves with variety of seating material to withstand temperature from -300 C to +2000C. “IVE” supplies valves with seats of Nitrile, EPDM, Silicon, Hypalon, Viton, Virgin PTFE,FEP, PFA achieve these Temperatures & applications.

B.H.E.L Forged Carbon steel Hand operated Globe / Gate / Non Return valves in # 800. Outside screw & yoke rising spindle/stem, bolted bonnet and positive back seat , Body & Bonnet made of Forged Carbon Steel to ASTM A 105. Seat ring disc and stem of 13% Cr. SS Socket-weld ends to ANSI B 16.11. Body tested to 3000 PSIG and seat to 2200 PSIG hydraulically with IBR and Manufacturers Guarantee Certificate. Sizes ½” to 2”. Item Code: bhel001. B.H.E.L Forged Carbon steel Hand operated Globe / Gate / Non Return valves in # 800.  

Pneucon Butterfly Valve, with integrally moulded elastomers body sleeve are designed for longer life and trouble free performance. Integrally moulded sleeve ensures perfect resistance against friction between the disc and the sleeve. SPECIFICATION Valve Size: 1 ½” (40 mm) to 36″ (900 mm) Rating: ANSI / BS 125# / 150# Design: Centric Disc, Single to Triple Offset Disc Fully Lined & Unlined Body End Connection: Wafer, Lugged & Double Flanged Operation: Wrench / Manual Gear Port Opening: Full Seat: Nitrile /EPDM / Neoprene / Silicon / Viton etc. Disc: Solid Dual Shaft / Single Shaft Design Code : API – 609 / BS – 5155 Testing : API 598

• Size: 15 mm to 200 mm
• Pressure Class: 125, 150, PN 10, PN 16
• End Connection: Flanged, Wafer, Lugged
• Operator: Lever/Gear or Pneumatic/Electric Actuator
• Design Mfg. STD: BS 5351/BS 5156, API 609/API 6D/API 600

• Size: 150-1000
• Brand Name: FLUIDTECQ
• Material: Stainless Steel
• Pressure: PN10, PN16
• End Connection: Wafer Type, Double Flange
• Power: Manual
• Operator: Gear Operated
• Working Temperature: 90 deg standard and 160 deg for Special application

• Size: 40 MM TO 1200 MM

DESCRIPTION :   A butterfly valve is a valve that isolates or regulates the flow of a fluid. The closing mechanism is a disk that rotates.Operation is similar to that of a ball valves, which allows for quick shut off. A butterfly valve is from a family of valves called quarter-turn valves. In operation, the valve is fully open or closed when the disc is rotated a quarter turn. The "butterfly" is a metal disc mounted on a rod. When the valve is closed, the disc is turned so that it completely blocks off the passageway. When the valve is fully open, the disc is rotated a quarter turn so that it allows an almost unrestricted passage of the fluid. 

• Type:: Wafer, Lugged, Flanged
• Face to Face: API 609, BS 5155, DIN 3202, IS 13095
• Flange:: DIN, BS, ANSI, IS
• Mounting Flange:: ISO5211
• Pressure Rating:: PN 2.5
• Size: DN 40
• Specialty: 3 way port, linkage actuation

Application: Food & Beverage, Chemical/   Petrochemical/Processing, Power   and Utilities, Paper and Pulp,    Ship Building and Steam