Viscosity Instruments Dealers in Thane

Designed as per ASTM D-445 IP-71 and ISO-3104 standards, our Low Temperature Kinematic Viscosity Bath has high accuracy and showcases reliable performance. We are distinguished Manufacturer, Supplier and Exporter of Low Temperature Kinematic Viscosity Bath in Maharashtra, India. It has built in stirrer with double walled glass window at front and back sides and fluorescent tube for illumination. Single  and cascade refrigeration systems are used to get low temperature, digital temperature controller is microprocessor based with an accuracy of ± 0.2°C and 0.03º C.

This oscillating disk-cure rheometer, per ASTM D-2084 and ISO-3417, tests elastomeric materials to determine values for viscosity, cure characteristics and temperature at various points in the cure cycle.Computerized testing simplifies and reduces setup, data acquisition and display time.The ODR software prompts the user through each screen, which greatly reduces employee training time. This software builds your data library by compound, batch and test, and stores data, on hard drive or disks, for future analysis.The cure curve is displayed on monitor during test and can be printed after test or recalled and displayed on the screen at a later date.Gate parameters can be set for all data points; any point out of parameter is flagged during test and marked on the test report.This report includes cure curve and torque/time data for all selected points.Statistical analysis is done on all selected data points.  Specifications Standard     ASTM D-2084 ISO-3417 Frame Frame Weight     195 lb 89 kg Frame Depth     25 in 63.5 cm Frame Width   21 in 53.5 cm Frame Height     42 in 107 cm Temperature Temperature Controllers     P.I.D. Temperature Range     100 to 400 ºF 35 to 205 ºC Accuracy     ± 0.5 ºF 0.2 ºC Motor Motor Speed     100 rpm Maximum Torque     200 in·lb 22.6 N·m Degree of Arc     1 3 5 Motor Voltage1   115 V Motor Frequency     60 Hz Phase2     1 Pneumatics Pneumatics Pressure     90 psi 620 MPa Pneumatics Volume     2 ft³/min 0.06 m³/min Computer System 500 MHz CPU, 10GB HDD, 64 MB RAM, 48X CD ROM IBM-compatible PC SVGA color monitor Software Cure-test program per ASTM D-2084 and ISO-3417 Library storage of data by compound Package includes mean, std. deviation and coef. of variation, with max. min. and histogram Data can be exported to popular spreadsheets and statistical programs Windows 95, 98, NT, 2000, ME and XP compatible program ODR Test SoftwareAll-aluminum test frame is rugged, yet light-weight. An anti-tiedown control switches prevent operator injury.P.I.D. temperature controllers, temperature probes and cast-in platen heaters insure rapid heat-up and stable, constant temperature to the test sample.Thermo isolators separate electronic and mechanical components from heat, providing more-consistent test results and less potential for mechanical failure. 

• Brand Name: Haico
• Voltage Type: AC
• Condition: New
• Application: Quality Testing of Liquid
• Certification: CE Certified
• Feature: Accuracy, Easy To Use, Sturdy Construction
• Type: Rotational Viscometer
• Frequency: 0-50Hz
• Warranty: 1yr
• Country of Origin: India
• Display: Digital
• Viscosity: 20-6,000,000 mPas

Confirms to specifications as per ASTM D-445 & 446, IP-71 standards. Double walled constructions, outer body made of heavy gauge mild steel, painted with powder coated paint, inside made of stainless steel. Glass wool insulation will be provided to prevent heat loss. Leak proof argon arc welded & fine finished joints. Toughened glass windows will be fitted on front and rear sides of the bath. In-built light arrangement will be provided. A stirrer provided for turbulence free agitation & uniform temperature throughout the bath. Temperature will be controlled by digital temperature controller cum indicator and PT-100 sensor.

Liquid inks, paints, varnish and surface coatings and other chemicals are supplied in "concentrated" form. The user needs to reduce or tally the thickness to their required level (by use of reducer or solvents) i.e to suit their requirement. Finally standardize these solutions by using B-4 Cup viscosity cup and measure the reading in seconds i.e time taken pass through the cup.

Kinematic viscosity is of primary importance in the design and selection of a wide range of petroleum products. Calibrated capillary viscometers are used to measure flow under gravity or vacuum at precisely controlled temperatures.

» Cannon-Fenske Routine Viscometers » Ubbelohde Viscometers » Reverse Flow Viscometers » Small Volume (semi-micro or micro) Viscometers » Dilution Viscometers » Vacuum Viscometers

Kinematic viscosity is of primary importance in the design and selection of a wide range of petroleum products. Calibrated capillary viscometers are used to measure flow under gravity or vacuum at precisely controlled temperatures.

Having advantage of high accuracy, stable digital display. Easy to operate and good anti-interference. It is widely used in the measurement of viscosity of various kinds of fluids such as grease, paints, food, medicine, adhesive and cosmetic etc., it can also be used for liquids. Its with large LCD display measurement ranges is 10 to 100,000m Pa. s with 4 Spindles. 6/12/30/60 rotor speed (RPM).  

• Display: Digital
• Data Acquisition: Automated
• Interface: PC
• Material: Plastic, Steel
• Usage/Application: Industrial

• ranges: 10 to 100,000m

Having advantage of high accuracy, stable digital display. Easy to operate and good anti-interference. It is widely used in the measurement of viscosity of various kinds of fluids such as grease, paints, food, medicine, adhesive and cosmetic etc., it can also be used for liquids. Its with large LCD display measurement ranges is 10 to 100,000m Pa. s with 4 Spindles. 6123060 rotor speed (RPM).

• Material: Aluminum and Stainless Steel
• Model Name/Number: BGD 125/2
• Brand Name: Biuged
• Usage/Application: Laboratory
• Features: Corrosion Resistance
• Centistokes: Upto 120 mm
• Capacity: 50 ml
• Outer Diameter: 86 mm +/-0.1 mm
• Production Tolerance: +/-2 Percent
• Efflux Time: Upto 100 Second
• Internal Diameter: 50+/-0.5 mm

Labo VSC - 100 kinematic viscosity bath is digital and easy to use universal device which provides appropriate measurements to the standards of ASTM D455 and TS 1451 EN ISO 3104. Measurements can easily be done by watching from lucid glass surface and semi-automatically. Many U tubes measurement systems like ubbelohde, micro ubbelohde, cannon-fenske, micro -ostwald... etc. can be used. Water or silicone oil can be preferred as bath liquid. To work at the temperature which are under the room temperature viscosity baths, which can easily connect and work integrated with Labo Refrigerated Circulators, are used commonly at mineral oil, chemistry, petrochemical, textile, plastic and polymer materials measurements. Working temperature can be easily changed and watched by digital screen in VSC-100 model which you can hold 3 different samples at ready.

rheometer, Abrasion Tester, foam tester, multifunction rheometer

Mooney Viscometer, Sulphur Analyzer- Horiba, Sulphur Analyzer

rheometer, memmert pass through oven, sartorius filters

Mooneyline Viscometer, Ozone Chamber

Red Wood Viscometer, oxygen analyser, Microprocessor Karl Fischer Titrator

Falling Ball Viscometer, Spiral Plating System, Automatic Colony Counter

Falling Ball Viscometer, CT3 Texture Analyzer, Torque Decal Labels

viscosity baths, Magnetic Stand, Abbe Refractometer, PHOTOCOLORIMETER