Wire Making Machines Dealers in Thane

• Country of Origin: India
• Color: Sliver
• Shape: Square
• Material: Stainless Steel
• Usage: Industrial
• Power: 1-3 KW
• Speaciality: Easy To Use, Reliable, Robust Construction

• Capacity: 10-50kg/h, 50-100kg/h, 100-200kg/h
• Machine Weight: 100-1000kg, 1000-2000kg, 2000-3000kg
• Packaging Type: Carton Box, Wooden Box, Metal Sheet Box
• Finishing: Polished
• Width: 50mm, 60mm, 70mm
• Power: 1-3kw, 3-6kw, 6-9kw
• Overall Length: 45mm, 55mm, 65mm
• Specialities: Rust Proof, Long Life, High Performance, Easy To Operate
• Size (mm): 200mm, 300mm, 400mm

We are offering rollers bar drawing machine. Technical data: • rope sizer with 5 stages, four rollers bar drawing machine • materials : stainless steel fixed roll, • exterior : stainless steel constant temperature control double-table • voltage : 380v (or as per the buyer request) • speed (mmin.) a25 • variable frequency controller available if needed • infinitely variable tubular heaters

Specifications: Max cutting capacity: up to 10m3/hr (only cutting time, not incl the time for transport of molds). Electric power: 380-400V/ 50Hz/3 phases (other electric power resourses are available on request) Very special electric geared motor for driving the cutting frame:capacity 0,35 kW Geared motors to drive the cutting wires capacity of 1.1kW and 1,5 kW Cutting frame guiding tubes: 4 very strong high quality alloy steel, chrome plated, with strong bushing and seals, life time guaranted Control board: mounted on the side of the machine, with all control and operation buttons, emergency safety stop button,… for controlling all the cutting operation speed of of cutting wires frame. Electric alarm, lighting switch, etc. All electrical & electronic components are from famous brand suppliers like Omron, LG, Schneider, to allow the operator to control the cutting process very easy at convenience Cutting mode: automatic / semi-auto/ manual Size of the mass concrete block before cutting: approx. 1220x1210x 400/500/600mm (height of brick depends on the buyer- options) Size of the bricks: nominal standard sizes 10x20x(40/50/ 60cm), tolerance max 2mm. Other sizes available on request (for ex 7.5 /15 x 20 x 60cm)

• Material: Metal
• Application: Industrial
• Feature: Fine Finish, High Strength, Premium Quality, Rugged Proof
• Resistivity: Rust Resistant
• Side Rail Length:: 20-30 mm
• Max Length:: Upto 12 feet

With more than 3 decades of experience in springs design, manufacturing and application engineering, we offer Springs for critical applications in engineering, power, automotive sectors and off-highway vehicles. We have mastered processing variety of spring steel & stainless steel materials by understanding material behavior, requirement of Heat treatment processes based on material grade and intended application to achieve high fatigue life. More than 50% of Raw Material is imported from Germany, Japan, Korea, Belgium etc. from OEM approved sources.

The new ST730T meets all the requirements for a flexible wire processing machine. The graphical display with touch screen supports the user in the setup of the cable. The cable is illustrated exactly as programmed; setting up time is reduced to the max.   New with MicroCoax mode:   The electronics high resolution and the precise construction guarantees unachieved precision end allows stripping of small coaxial cables down to a conductor diameter of 0.1mm (AWG 38) ! In the MicoCoax mode, the resolution of the ST730T increases up to 1/1000mm (0.000 04 Inches) and the clamps closes smoother.   The ST730T is the first and unique machine on the market that is able to process such a wide range of coaxial cables!The handling is very easy: insert the cable and the sensor will start the stripping cycle. The ST730T strips the outer jacket, the shield as well as the dielectric within seconds very precisely.Set up times are practically eliminated because when selecting stored cable parameters the machine sets itself up. The job is further simplified through the build in counter and the ability of setting sequences. The intuitive operation allows for quick and reliable machine settings when changing to a different cable. Stripping parameters can be protected by selecting a password through authorized personnel.The stripping machine ST730T impresses, due to its high quality workmanship, longevity and guaranties the highest flexibility with sustained productivity!

We are leading manufacturer, exporter and supplier of an excellent quality range of Automatic Spring Coiling Machine. The Spring Coiling Machine, offered by us, are widely demanded in the market due to the unmatched quality and unbeatable prices.

• Country of Origin: India
• Automatic Grade: Automatic
• Automatic Grade: Automatic
• Voltage: 240 V
• Material: Mild Steel
• Brand Name: Evanshi
• Frequency: 50 Hz
• Application: Industrial
• Wire Type: PVC

Fully Automatic Cutting and Jacket Stripping of Multi Core CablesModel No. RAE - Ser - 2 2) Fully Automatic Cutting and Jacket Stripping of Battery Cables Model No. RAE - Ser - 11 3) Cutting Machine - CTO 16 4) Stripping Fixture

Wire Drawing Man MachineryNew and Used Cable and Wire Manufacturing MachineryUsed wire rope Manufacturing Machinery 'As seen' or Fully Rebuilt/Refurbished to fully meet your requirement In addition, we provide a comprehensive wire rope machinery and wire drawing machinery installation service. We also offer a full refurbishment service for your wire rope manufacturing machinery and wire industries. Product Description Feature: Used for continuous finished drawing wire take-up and weathered steel wire coiling in the level direction of the bobbin.  

• Power Source: Hydraulic
• Model Name/Number: SCP-2T
• Machine Structure: Vertical
• Phase Type: Single Phase
• Automation Grade: Semi-Automatic
• Capacity: 2 Ton
• Input Voltage: 240 V
• Frequency Hz: 50 Hz

• Certification: CE Certified
• Color: Black, Brown, Grey
• Voltage: 220V, 230V, 380V
• Condition: New, Used
• Automatic Grade: Automatic, Manual, Semi Automatic
• Weight: 100-1000kg, 1000-2000kg, 2000-4000kg, 4000-6000kg
• Rated Power: 1-3kw, 3-5kw, 5-7kw, 7-9kw, 9-12kw
• Warrenty: 1 Year, 2 Years, 5 Years

We are the main supplier of this product.

The ST series Spring Load Testing Machines manufactured by us are low cost, user friendly & precise. Spring load testing machines are suitable for Tension as well as Compression Loads. Linear Bearing supported vertical movement of the rack-pinion arrangement makes testing the spring very easy. Further, it’s fast operation helps operator to check same spring multiple times or carry out batch testing much faster. Digital display for Load & Deflection.

• Brand Name: Brady
• Voltage: 100 to 240 V
• Warranty: 1 Year
• Model Number/Name: WRAPTOR A6500
• Automation grade: Automatic
• Frequency: 50 to 60 Hz
• Dimensions: 17.75 in H x 14.5 in W x 22.5 in D
• Machine Cycle Time: 5 s
• Maximum Label Tape Width: 2 in
• Minimum Label Length: 0.75 in
• Power Supply Voltage: 100 to 240 V @ 50 to 60 Hz
• Print Resolution: 300 dpi
• Wire Diameter Range: 0.06 in to 0.6 in
• Applications: Aerospace,Cable & Wire Marking,Communications Cables,Data Center Labeling,Panel Manufacturing,V
• Label Material Types: Flame Retardant Wire Wrap,Nylon Cloth,Self-Laminating Vinyl
• Plug Type: US
• Printer and Label Applications: Wire & Cable

Standard Marking window: 50mm X 30mm Type Of Machine: Pneumatic Type Of Head: Poratble Head Material of Cons:Aluminium Sheet Metal Body Handles: Front support handle and rear Combo handle for manual holding & stand mtg. Weight:2.5 kg without front fixture Cable: 10m standard cable with head. Standard Stylus: LP‐10 for Steel OR LP‐06 for Al Marking (P) EM‐01 Stylus Color of Machine: Siemens Grey

  Al  3.0mm to 1.2mm Cu 2.5mm to 0.90mm MS 1.4mm to 0.45mm

This machine is widely used in perfume industry, where small and medium scale production is required. If there is more production required, and if it is more human labor available, then also this machine is suitable.

Most user friendly, Load And Number Of Cycles Displayed Digitally, Machine Stops As Soon As The Sample Fails, Machines Available With Or Without Computer Interface.

• Automation Grade: Semi-Automatic
• Model Name/Number: ST730T
• Power Source: Electric
• Design: Standard

We hold expertise in providing a comprehensive range of Molding Machines that is manufactured using quality components according to the industry standards. Precision engineered, these are well known for their robust construction, excellent performance, high efficiency and smooth operations. Owing to its quality attributes, our range of Molding Machine caters to the requirements of various industries.  

• Max. Width mm: 200
• Thickness mm: 0.3 TO 0.8

The units are fabricated from steel and the straightener rolls are properly fixed and aligned in machine and ground housing.OneTwo sets of drive pinch rolls are provided as required. All the feed Rolls & Bottom Rolls are driven, while Top Rolls have individual adjustments.All the Rolls are made of Special Alloy Steel Material Hardened, Ground, Chrome plated & are housed into precision needle

• Features: Variable lay length can be achieved by PLC.

Drum Twister Line is used for laid up of power cable of low voltage sectorround and high voltage core. It can also be used for cable armouring with steel wire or screening of highextra high voltage core using aluminiumcopper wire.

• Power Source: Electric
• Machine Type: Hose/Pipe Crimping Machine
• Automation Grade: Semi-Automatic

Specifications: Max cutting capacity: up to 10m3/hr (only cutting time, not incl the time for transport of molds). Electric power: 380-400V/ 50Hz/3 phases (other electric power resourses are available on request) Very special electric geared motor for driving the cutting frame: capacity 0,35 kW Geared motors to drive the cutting wires capacity of 1.1kW and 1,5 kW Cutting frame guiding tubes: 4 very strong high quality alloy steel, chrome plated, with strong bushing and seals, life time guaranted Control board: mounted on the side of the machine, with all control and operation buttons, emergency safety stop button,… for controlling all the cutting operation speed of of cutting wires frame. Electric alarm, lighting switch, etc. All electrical & electronic components are from famous brand suppliers like Omron, LG, Schneider, to allow the operator to control the cutting process very easy at convenience Cutting mode: automatic / semi-auto/ manual Size of the mass concrete block before cutting: approx. 1220x1210x 400/500/600mm (height of brick depends on the buyer- options) Size of the bricks: nominal standard sizes 10x20x(40/50/ 60cm), tolerance max 2mm. Other sizes available on request (for ex 7.5 /15 x 20 x 60cm)

We are offering wire cutting machine. Specifications: machine massif dimension (hlw): 2000*2000*1950mm or machine size depends on mold cover size size of total mold block (lwh): 1200*1200*625 or 850mm material required: only fly ash cement blocks can be cut actual output: 8 to 10 hours or depend on casting operating mode: automatic operating time for machine : 3 to 5 min operating staff: 3 to 5 persons

• Application: Continuous Terminals
• Voltage: 110V
• Condition: New
• Automation Grade: Automatic
• Type: wire bundling machine
• Usage: Crimp