Corrosion Testing

Accurate monitoring of corrosion rates in any environment is critical when viewed in terms of the maintenance and repair costs associated with corrosion and material failure.

Corrosion testing is designed to evaluate the corrosion resistance of materials, measure the corrosion rate, and evaluate the effectiveness of corrosion prevention and control measures. Various experiments are used to simulate and study corrosion in different environments.

This is most primitive but yet most widely used technique. We supply all types of Corrosion coupons like Strip coupons, Disc coupons, Multi-Disc-Coupon, stress coupons, Scale coupons ,,,etc, These coupons are available in all metallurgies, specially in carbon steel like API 5L Grade X42, X46 , X 52, X56, X 60, X70 and X80 as well. We provide these coupons with sand surface finish, with a serial number stamped on it for easy identifications. Types of insulating washers are supplied to avoid the galvanic contact with the holder. The buyer is always advised to check the MTC (Material Test Certificate) The transmitters are then connected to DCS system for On-Line measurement

• Place of Origin: Delhi, India
• Brand Name: Spectro

Corrosion studies in chemical plants and cross country pipelines and evaluate stability of structures. In-site metallographic technique is also used independently to evaluate various types of corrosion in equipment and components working under severe conditions.Evaluation of pitting, crevice corrosion, corrosion fatigue, sensitization and stress corrosion cracking in boiling MgCl2 or CaCl2 incorporates qualitative as well as quantitative features. Intergranular corrosion tests Oxalic Acid Test, ASTM A 262, Practice A Ferric Sulfate - Sulfuric Acid, ASTM A262 - Practice B Nitric Acid, ASTM A262, Practice C, (Huey Test) Copper - Copper Sulfate - 16% sulfuric acid, ASTM A262 - Practice E (Straus Test) Copper - Copper Sulfate - 50% sulfuric acid, ASTM A262 - Practice F Salt Spray (Neutral / Fog), ASTM B117 Salt Spray Test (CASS) Pitting Corrosion Test, ASTM Gr 48 Crevice Corrosion Hydrogen-Induced Cracking (HIC) Test, NACE TMO284 Sulfide Stress Corrosion Cracking (SSCC), NACE TM 0177 Chloride Stress Corrosion Test as per ASTM Gr 36 Specification Corrosion test as per ASTM Gr 35 specification Ammonia Vapour Test Corrosion test as per ASTM A 761 Specification Corrosion Major Equipments Chloride Stress Corrosion Test as per ASTM Gr 36 Specification IGC Apparatus (All Practices) HIC Apparatus SSC Apparatus Salt Spray Test Apparatus Cass Test Apparatus Carbon Test Apparatus Potentio Meter Test Apparatus Ammonia Vapour Test Apparatus Crevice Corrosion Test Apparatus Electrolyte Etching Machine

We are doing the Corrosion Testing services like Inter Granular,Pitting & Crevice Corrosion test,Chloride Stress corrosion Cracking Test,Sulphide Stress Corrosion Cracking Test,Hydrogen Induced Cracking Test,Mercurous Nitrate test,Mass Coating and Coating Thickness Measurement.

We are providing Corrosion Testing Service. Our corrosion testing setup has superior equipment that is well equipped to give quantitative and qualitative outputs. We ensure quality evaluation of services in the field of corrosion. Regular quantitative tests are performed such as: Corrosion Rate Monitoring as per ASTM, NACE and DNV Standards. Hydrogen Induced Cracking (HIC) test as per NACE standards. Sulphide tress Corrosion Cracking (SSCC) in equipment exposed to sour gas service as per NACE standards.

Corrosion, Erosion, UT Thickness Training & Certification Plates. Corrosion/Erosion and Pitting Specimens Pipe Pipe Dimensions: OD 8” with length 300mm Thickness – 25 mm Stainless Steel Corrosion/Erosion defects were placed randomly on the specimens. Some of specimens will have naturally obtained corrosions/erosions recorded depth of the corrosion indications will be based on the deepest spot within the field of corrosion. The host side of the Pipe will be covered with a “removable” cover plate.    

Salt Spray Test: A large part of an automobile is made up of metals like steel, aluminium and iron which often have to sustain the damage inflicted by environmental corrosive agents like water, moisture, mist, humidity and vapours. It is significant for vehicle manufacturers to ensure that the quality of the metals and the protective coatings being used are durable enough to withstand these corrosive attacks. In our Lab facility, we undertake testing services to measure the strength and sturdiness of the anti-corrosive films applied over the metallic components of the vehicles. Testing ensures that the protective film coated over the metals conforms to the safety standards and adheres to the guidelines of the regulatory bodies. Salt Fog Testing: Salt fog is a type of spray test in which a vehicle is kept in a chamber where it is sprayed with salt fog incessantly at a particular temperature. This helps to evaluate its resistance power against corrosive salts and to determine the durability of the protective film applied to the body of the vehicle and its counterparts. We offer highly reliable salt fog testing services to verify the suitability of the protective films on vehicles in a particular simulated environment.

Corrosion as we all know is an electrochemical reaction between material and environment which deteriorates the quality of the article and its life. The degree of severity of corrosion depends upon various factors out of which environmental parameters are the most common, such as temperature, humidity, chemical composition, etc.

Corrosion as we all know is an electrochemical reaction between material and environment which deteriorates the quality of the article and its life. The degree of severity of corrosion depends upon various factors out of which environmental parameters are the most common, such as temperature, humidity, chemical composition, etc.

We are providing a complete services like corrosion testing services

Corrosion testing helps you estimate component service life, compare candidate materials in your service environment, and help screen your materials and their condition.

Corrosion Testing, ndt consultancy services, ndt training institute

corrosion testing service, Microbiological Testing

Intergranular Corrosion Testing Service, Torque Wrench Calibration

Intergranular Corrosion Testing, x-ray fluorescence, water testing lab

Corrosion Testing, Micro Testing Lab, chemical testing, mechanical testing

Corrosion Testing, Chemical Analysis of Alloys, Scanning Electron Microscope