Iron Removal Filters Dealers in Tiruvallur

Iron is an objectionable constituent of portable water. Iron in water imparts a bitter characteristic, metallic taste and cause oxidized precipitate. Color of water, which may be yellowish brown to reddish brown, symbols the water objectionable or unsuitable for use. In addition to this, Iron stain everything with which it come in contact. Iron exists in water in two levels. One as the bivalent, Ferrous Iron (Fe ++) and the second one as the trivalent, Ferric Iron (Fe+++). The Ferric Iron generally occurs in the precipitated form. Iron forms complexes of hydroxides and other in-organic complexes in solution with substantial amount of bi-carbonate, sulphate, phosphate, cyanide or halides. Presence of organic substances induces the formation of organic complexes which increase the solubility of Iron. The waters of high alkalinity have lower iron than waters of low alkalinity. Causes of Iron:Iron contamination causes stains on your sinks and bathroom tiles. Stains appear on your faucets and fixtures. Pipes corrode washing machines, water heaters, dishwashers, steam irons, showers and radiators fall prey. Up to 50% of their life and efficiency gets reduced, adding up 25% in maintenance and running costs.If iron water is consumed it can cause loss of appetite and tissue damage. When used for bathing it causes skin rashes and hair loss. ron removal process description:Stage I - Chemical dosingTo level the pH factor, chemical pre treatment is done in order to facilitate rapid aeration than the chemical dosed water send in to the aeration tanksStage II- Online aeration Type Chemical dosed water is sent into the aeration tank consisting three chambers. The raw water is allowed to sprinkle at the first chamber through specially designed perforated pipes. The water travels from first chamber to other two chambers through accurately designed multiple vents at variable levels of the bifurcate walls, thus provides ZIG ZAG motion. When the water reaches the third chambers the dissolved iron gets oxides and become suspended iron.8 Hours Storage Aeration Type Chemical dosed water is pumped in to aeration tank. The raw water is allowed to sprinkle (at the tank/sump) via designed perforated pipes and allowed to remain there for about 8 to 10 hrs to get oxidized through the natural process and the iron presence in the water becomes suspended iron.Stage III - FiltrationThe suspended iron water is passed through Iron removal unit, the filter media is supported on gravel bed that consists of multiple layers of progressively larger sizes of manganese di oxide, activated carbon 900iv, graded quartz sand, fine sand, super fine white sand and pebbles, which retain the suspended iron particles. During the filtration cycle the filter bed retains the dirt and suspended particles from the water and accumulates within the filter bed.Backwash:As the filtration progress the filter media gets loaded with the retained particles, this results in a continuous increase of pressure drop across the filter, when a predetermined pressure drop level is achieved the filter is shut down for cleaning. After backwashing the filter is rinsed with raw water and after the quality of water is achieved the filter is put back into service.Product model:Our NONFERR iron removal plants comprise Mild Steel /SS / FRP Pressure Vessel, Frontal piping wok with manual/Automatic multi port valve butterfly valve/conventional valves for easy operation and control. Available from 1000 LPH to 1000000 LPH.