40-40 SS Membrane Housing
2,000 - 5,000 Per Piece
10 Piece (MOQ)
RO Membrane Housing
45,000 - 70,000 Per Piece
25 Piece (MOQ)
Best Deals from Membrane Housing
RO Membrane Housing
300 Per Piece
1 Piece (MOQ)
Stainless Steel Membrane Housing
Get Price Quote
Stainless Steel MembraneHousings
Get Price Quote
We have ro membrane housings and components suitable for 4040-single element, double elements made of ss 304.
UF Membrane Housings
Get Price Quote
5 Piece (MOQ)
Membrane Housing
Get Price Quote
10 Piece (MOQ)
Membrane housing is a vital component in reverse osmosis (RO) water filtration systems, used to hold and protect the RO membrane. PENTAIR is a well-known manufacturer of high-quality membrane housing products for a variety of applications, including residential, commercial, and industrial water treatment. PENTAIR's membrane housing is designed with precision engineering and high-quality materials to ensure durability and optimal performance. These housings come in various sizes and configurations to accommodate different RO membrane sizes and flow rates. Additionally, PENTAIR's membrane housing products feature easy-to-use design features such as quick-connect fittings and removable end caps, making them user-friendly and easy to maintain. With PENTAIR's membrane housing products, water filtration systems can effectively remove impurities and provide clean and safe drinking water.
Membrane Housing
5,000 Per Piece
1 Piece (MOQ)
Membrane Housing
1,850 - 25,000 Per Piece
5 Piece (MOQ)
frp membrane housing
Get Price Quote
100 Piece (MOQ)
RO Membrane Housing
Get Price Quote
In the series of our products, we are engaged in offering a wide range of RO Membrane Housing to fulfill the demands of our clients. These products are sturdily constructed and ensure long lasting service life. Latest equipments and advanced technologies are used in fabricating these products. These products are resistant to corrosion. Features: Long life Better quality As per industry standards
Microfiber Membrane Housing
Get Price Quote
membrane housings
Get Price Quote
We deal in Membrane Housings, which are important components in a typical water treatment system. The Membrane Housings can be used in reverse osmosis systems as well as other water purification systems. Sourced from world-renowned CodeLineâ„¢, the Membrane Housings are precision-engineered and best in quality. Standard Features Of 8" Membrane Housings Mirror ID finish for easy & quick, loading & unloading of membraneUnique shell design allowing vessels to weep at 4X pressure designExterior coated with high gloss polyurethane paint for UV resistanceCE marking comes as a standard Feature. ASME Code Stamped vessels available on request Side Port & Multiport Models Manufactured as per the latest CodeLine TM OCTA technologyAvailable with pressure ratings ranging from 75 to 1200 PSIHigh operating temperature up to 190°F comes as standard feature Availability 80S Series – available with side port Options of 1.5", 2.0" & 2.5". 80H Series – Available with Side port options up to 3". 80U Series – Available with side port options up to 4". End Port Models : 80E Series – Available at 300, 450, 600, 1000 & 1200 PSI Applications DesalinationIndustrial ProcessingElectronics ManufacturingPharmaceutical industryFood and Beverage
RO Membrane Housing
Get Price Quote
100 Piece(s) (MOQ)
RO Membrane Housing
Get Price Quote
We are enlisted amongst the reputed Manufacturers and Suppliers of RO Membrane Housing. The RO Membrane Housing is manufactured using superior quality raw materials and latest technology and thus, gives services for a longer period of time. Our RO Membrane is durable and standardized. The RO Membrane Housing is available in different sizes and specifications. Specialties Checked under quality control to ensure qualitySophisticated designsEasy to use
SS RO Housing
Get Price Quote
ss membrane housing
12,000 - 399,000 Per piece
1 piece (MOQ)
We are manufacturing SS membrane hosing as per client requirement. For more details you can contact to us.
Membrane Filter Housing
Get Price Quote
We have cemented our position in the markets as a major Manufacturer and Supplier of Membrane Filter Housing in Bhopal. The Membrane Filter Housing, offered by us, is manufactured using the best grade raw materials and the latest techniques. The Membrane Filter Housing is available at highly competitive prices and is widely demanded as well.
R.O.Membrane Housing
Get Price Quote
3/4" NPT Feed/Conc & Premeate Ports Single Piece Abs Head Direction Connection For Standard Membrane Integrated Looking Segments/ Screws Straps & Saddles Included Certified Manufacturing Facility 250PSI & 400 PSI Maximum Operating Pressure. MOC: Stainless Steel Operating Pressure: 250 -400 psi Stainless Steel, High Polished Exterior End Entry Smooth & Sleek Look Unique Design saves both Time and Money Competitive Prices Designed for direct connection to most style of R.O. elements Double O-Ring MODELS: 4040-1ELEMEENTS , 4080-2ELEMENTS , 40120-3ELEMENTS Â
RO Membrane Housing
Get Price Quote
10 Piece (MOQ)
We have wide range of Membrane Housing with price ranging from economic priced to high quality price. Our range of products include M-Housing Single O-Ring, M-Housing Double O-Ring and few others.
Membrane Housing (4.0"E)
Get Price Quote
Membrane Housing (4.0"E) that we export and supply is designed for continuous and long term use as housings for membrane filtration. Our Membrane Housing is used to treat tap, brackish & sea waters. Our Membrane Housing can accommodate any standard 4 Inch nominal diameter & 40 Inch long spiral wound membrane with ease. In case of female membranes only, membrane interface adapters will be required, which will be supplied along with the housing. User's Guide : Guidelines & Information incorporated in this User’s Guide are intended only as a supplement to good industrial practices. The guide should be used in combination with Engineering Drawing of respective membrane housing model used.Material Receipt : On receipt, ensure that all the material is received as per ordered qty & in good condition. For any shortages in receipt, intimate the supplier within the stipulated time to void the warranty & in case of transit damages, intimate the concerned insurance agency.Handling : Membrane housing shell is made of fiber glass & any impact, scratches or mishandling during unloading / loading will reduce the life or make the membrane housing unfit for usage. Ensure that membrane housing packing is intact till the installation.Installation : Ensure that the installation engineer reads the user guide in detail, before installation. In case of any difficulty, contact the nearest Aquanomics representative.Good industry practices & plumbing / piping codes have to be followed during installation, operation & maintenance in order to assure safe, optimum & long service life of membrane housing. Improper installation can result to catastrophic failure & may result in severe bodily harm or property damage.Quick Checks : Polyurethane or rubber saddles should be used as an interface between the membrane housing shell & skids / frame.Under pressure, membrane housing must be free to expand. Ensure that flexible fittings & couplings are used to allow expansion. Vessel must not be subjected to excessive stress caused by bending moments. Vessel ports & components should not be used to support piping manifolds or any other components.Aquanomics 4 Inch Membrane Housing – User’s Guide : Water Leaks Any water leaks from vessel / piping during installation / commissioning should be arrested immediately in order to keep the end plugs & retaining rings clean, dry & free from corrosion. Failure to do so can lead to catastrophic failure & may result in severe bodily harm or property damage.Special Requirement : Aquanomics provides engineering assistance in selecting appropriate membrane housing & specialty steel for specific applications. Get in touch with your nearest Aquanomics representative. However, the final determination including the evaluation of the construction materials for use in specific environment will be the responsibility of the purchaser. Precautions : For safer & better service life of membrane housing, follow all the precautionary instructions given below. Failure to do so will void the warranty. Mounting :- Mount the membrane housing centered on horizontal members spaced at recommended span (s) using compliant mounting hardware furnished. Tighten the straps – Maximum one ft-lb. Piping :- Use flexible piping / victaulic couplings for permeate & feed / concentrate connections. Hanging piping manifolds or supporting other components with the membrane housing may result in damaging of membrane housing. Permeate port is made of Engineering Plastic & Tightening the permeate port more than one turn past hand tight will damage the port. Overpressure Protection :- Provide overpressure protection for membrane housing set at not more than 105% design operating pressure. Inspection :- Inspect end closures regularly, replace deteriorated components and correct causes of deterioration. Servicing :- Relieve system pressure before working on the membrane housing. Working on system under pressure may result in severe bodily harm or property damage. Before Start – Up :- Ensure that the retaining ring is in place and fully seated in the groove. Pressures :- Operating the vessel in excess of the ratings, will shorten the life & may result in severe bodily harm or property damage. Engineering permeate port are designed to operate at 125psi,operating at pressure in excess of 125psi must be approved by factory. Aquanomics 4 Inch Membrane Housing – User’s GuideMembrane Housings are not designed for Vacuum conditions; operate only in positive pressure applications. pH Operation :- Membrane Housings are designed for continuous operation at a pH of 3 – 11 & for intermittent cleaning pH 2 –12 for less than 30 minutes. Stoppage :- Some feed waters may cause corrosion under static condition, in order to prevent the system from corrosion, it is recommended to flush the system with permeate water. Engineering : Ensure that the operator / Engineer who carries out the servicing / maintenance schedule has good knowledge of plumbing, hydraulics, membranes, water treatment & good industry practices. Removing the End Plug : Relieve the membrane housing of system pressure. Disconnect the feed / concentrate & permeate piping. Mark i dentification on the piping assembly for easy re-assembly. Remove all contaminants & foreign matter from end margin of the membrane housing,using a scotch-brite, sand paper or brush. Any contaminants interfering with the end plug removal will damage the end plug or I.D of membrane housing. Remove the retaining ring out of the shell / insert ring groove. Continue removing the ring by running your finger behind the ring & carefully pulling the ring from the groove.Take care not to get the finger injured. In case if it is difficult to remove the retaining ring due to prolong use, in such case lightly tap the end plug using a plastic mallet or use any releasing spray for quick & easy removal. Connect threaded Engineering Plastic nipple to the permeate port and gently rock the end plug up & down to release the end plug from the shell. Repeat the above steps to remove the end plug from opposite side. If the end plug is with adapter design, remove the adapter by slowly pulling on the adapter body. Aquanomics 4 Inch Membrane Housing – User’s Guide Closing the End Plug : Check the bore of the membrane housing for any foreign matter or imperfections. Remove all the foreign matter using mild soap solution and rinse with clean water. For imperfections, using a 600 grit sand paper lightly sand the surface & clean with soap water & rinse with clean water. Lubricate all the seals (pwt/ adapter / head) using silicone based lubricant or commercially available glycerin. Apply a very thin layer of lubricant on the seal area of the membrane housing I.D for ease in closing the end plug.Note : Check with your membrane supplier before using the lubricants as they can foul the membranes. If the end plug is with adapter design, insert the adapter in the end plug by slowly pushing in the permeate port tube. Holding the end plug square to the axis of the shell, slowly push the end plug into the shell until the retaining ring groove is clearly visible. Place the end of the retaining ring in the groove of the shell / insert ring & continue pushing the ring counter-clockwise till the ring completely seats into the groove. Reconnect the feed / concentrate & permeate piping. Double check the assembling of end plugs, retaining ring seating in the groove, piping connections etc before pressurizing the system. Take all the necessary safety precautions before start-up. Do not tolerate any leaks. Leaks can lead to corrosion that can lead to component deterioration & eventually catastrophic failure. Membrane Loading / Un–loading :Note : Procedure described below is only for information purpose. Membranes should be loaded / un-loaded according to the membrane manufacturer’s instructions. If membranes are not installed properly, malfunctioning of system /membrane damage may occur. As described in End Plug removal section, remove the End Plugs. For unloading the membranes, push the membranes out of the vessel from the upstream end (feed end). Note: Membranes are always removed & installed in the direction of feed flow. While loading the membrane, ensure that the membrane housing bore & membrane outer surface is perfectly clean & contamination free. Lubricate the seals as per manufacturer’s recommendations. Reinstall the end plug on the down stream end as described in End Plug Closing section. Load the membrane with the brine seal (typically a U-cup seal) installed on the up-stream end with it slip facing up-stream. Push the membrane in the housing until the membrane fully engages with the head on the down stream end. Once membrane is loaded, close the end plug on the up-stream end. Inspection & Overhaul :Once the end plug is removed, dismantle the end plug & separate all the components. Clean all the components with soap water, scotch brite & rinse with clean water. Inspect all the components & shell for any corrosion,dents, cracking, softening, discoloring, imperfection, scratches etc. Plastic (Engineering Thermoplastic) Components :- Cracks & Chip-Off – Replace the components. Softening & Dis-Coloring – Can be due to chemical attack, replace the components,if problem continuous check for alternate material. Damaged Threads – Replace the components. Metal Components :- Dents & Sharp Edges – Using sand paper polish the damaged area,if the problem can be rectified use it or else replace the components. Corrosion – Can be due to non compatibility of water & metal composition or due to chemical attack. Replace the components & if the corrosion continuous check with factory for alternate material. Shell :- Check the bore of the membrane housing for any foreign matter or imperfections.Remove all the foreign matter using mild soap solution and rinse with clean water. For imperfections, using a 600 grit sand paper lightly sand the surface & clean with soap water & rinse with clean water. Note :- If any component cannot be restored to working /as new condition, replace the parts. Use of damaged components can lead to catastrophic failure. Every time the vessel is serviced, replace used seals with new ones.
Stainless Steel Membrane Housing
1,000 - 50,000 Per Piece
1 Piece (MOQ)
Stainless steel membrane housing is a type of pressure vessel designed to accommodate reverse osmosis (RO) or ultrafiltration (UF) membranes. It is made of high-quality stainless steel material, which provides superior strength, durability, and corrosion resistance.
R O Membrane Housing
7,000 Per Piece
1 Nos (MOQ)
R o membran housing .
Membrane Housing
80 Per Piece
Pressure Vessel Membrane Housing
Get Price Quote
We make available Pressure Vessel Membrane Housing which are acclaimed for their make and long service life. Be it online payment processing or offline payment processing, we are capable of executing both as per your convenience. We take care of all your transactions made; by this, we make all the procedures transparent. We are highly concerned towards providing the top-notch array of products to the buyers and thus, check the lot at different levels for quality assurance.
Classic India SS Membrane Housings
Get Price Quote
Our company is ranked amidst progressive distributors of the product in Ranchi(India) as well as varied other marketplaces. Timely delivery of the orders is assured with us as we are backed by one of the most sophisticated transportation facility.
Membrane Filter Housings
Get Price Quote
Being the leading names in the industry, we offer our client’s performance based range of Membrane Filter Housingsthat are appreciated among the clients for optimum quality and durable standards. We offer them in varied specifications and are corrosion resistant in nature. Our entire product range is quality assured and is tested on varied parameters.Features: Quality assured Durable Functionally advanced
RO Membrane Housing
4,500 Per Piece
8040 Grade Industrial Ro Membrane Housing
8,000 Per Piece
1 Piece (MOQ)
RO System Membrane Housings
Get Price Quote
As a reliable name in the industry, we offer only quality-approved products to the clients. Thus, we make use of only excellent quality raw materials obtained from trusted sources. Interested buyers can purchase RO System Membrane Housings from us in bulk and retail, as we are its reputed supplier. Our RO System Membrane Housings are largely acclaimed for their long durability.
