Section Straightening Machine Dealers

• MODEL: K.W./RPM/Volts
• SSM-1: 5.5 K.W./1500/415V

Technical Specifications: Frame: The frame are of Heavy Duty construction from plates and consists of two housing between which is placed the distribution gears to the rolls shafts. The gears are hardened running in oil bath. Drive: All bottom rolls are driven, all top rolls are idle. Adjustment : The top rolls are adjustable in vertical direction. The adjustment is by means of hand wheels. Bearings: Machines are fitted with antifriction ( Taper Roller ) bearings, Roller bearings and Ball Bearings. Rolls: The machines consist of eight rolls. Separate rolls are required for each type of Section. Warranty : All our machines have a warranty of six months against manufacturing defects.

• Material: Stainless Steel
• Voltage: 220V
• Rated Power: 1-3kw
• Driven Type: Electric
• Country of Origin: India
• Operating Type: Automatic
• Capacity: 50 x 50x5 x 100 to 250x 250 angel

• Weight: 100-500kg
• Color: Green
• Voltage: 380V
• Automatic Grade: Semi Automatic
• Country of Origin: India
• Finish: Coated

We are trusted manufacturers and suppliers of straightening machines that have gained appreciation for optimum performance and longer service life. Designed with the assistance of our engineering excellence, these machines are used for straightening rolled steel sections such as angle, channels, rounds, and beams. Available in 130 mm roll centers to 600 mm roll centers. Number of rolls can be 10/8 and are suitable for all types of sections. Straightening Machine offered by iron/Adamite Rolls. Suitable For Joists Upto 500 mm, Channels Upto 400 mm, Angles Upto 200 x 200 mm.

• Voltage: 220 - 380V
• Brand Name: Tsai
• Capacity: 08 mm-25 mm
• Motor Power: 7.5 HP to 20 HP
• Automatic Grade: Automatic
• Speed: 20 ft/min to 30 ft/min
• Features: Roller Material H.c.h.c, Gear Box Radicon Make,Steel Fabricated Heavy Duty Body
• Technical Specifications: Suitable for all Types of Sections

Introduction: The Section Straightening Machines are used to Straighten Rolled Steel Sections like of any rolled, Drawn, Ferrous or Non Ferrous solid section in cold condition etc. TSA is supplying these machines to many reputed concern firms. Straightening machine made up of steel fabricated M. S. plates of amply thickness with outer lining of same plates to strengthen the body will carry gears to run the rolls. The Straightening Machines are fitted with inbuilt reduction gear box on frame

• Type: Section Straightening Machine
• Color: blue & 0range
• Condition: New
• Driven Type: Electric
• Automatic Grade: Automatic

The Section Straightening Machine, which we offer is made using quality components and materials. Our Section Straightening Machine is used for straightening of bass of different section like Hex, Square, Flat, etc. Our Section Straightening Machine is sold under the brand name- UMT. We are Faridabad based trusted Manufacturer and Supplier of the Section Straightening Machine. Why Our Section Straightening Machine? Low maintenance cost Less power consumption Easy to use Ensures reliable operations Minimum Order Quantity : 2 set

Tejinder drawing section straightening machine, cutting, polishing is first of its kind manufactured indigenously for cold bright bar drawing. It gives bright bar drawing, straightening of any rolled, drawn, ferrous or non ferrous solid section in cold condition. This machine is engineered to give trouble free long life.

To keep the extensive array of products safe till final dispatch, we have a well-structured and organized warehouse that is well maintained by veteran professionals. Backed by efficient logistics team, we make deliveries of the goods in the set time span.

• Driven Type: Electric

Ajanta engineering works are largest manufacturing of wire, stripe, section straightening machine and straightening with cutting machine. These machines for round, square, hexagons and any type of section in any metrical in rang of 1 mm to 100mm. Capacity, it is very useful for extrusions plan and other factory where rod,wire, stripe, section straightening requirement, machine is very accurate for straightening. It comes in many models. The company also manufacturing typical application of small parts straightening machine likes stamping, clutch plates, washer and other where precision straightening requires. Parts of machines are made by steels hard and ground as per requirement. Prices of the machines are very economy. The company also manufacturing brass & copper metal components as per costumer’s requirement.

Channel ‘C’ and Joist ‘I’ (min. max.) mm:30 x 12 75 x 40, Bearings:Ball & Roller, Speed (m min.): 35, Shaft Extension (Dia. Length): 70 140

Tejinder Drawing Section Straightening Machine, cutting, Polishing is first of its kind manufactured indigenously for Cold Bright Bar Drawing. It gives Bright Bar Drawing, straightening of any rolled, Drawn, Ferrous or Non Ferrous solid section in cold condition. This machine is engineered to give trouble free long life.

We are a trusted name that is engaged in the manufacturing and exporting of premium quality Section Straightening Machines. The offered product is highly regarded for its long functional life. Made available at cost-effectiveness prices, the whole range of high quality straightening machines offered by us is widely approbated in the market. Specifications: Capacity: Angle: up to 200x200x20 mm Channel-up to 400x100 Reduction Gear Box: Fitted on Base Rolls: Forged steel Rolls 8 No. And 10 No Gear: Forged Steel Shaft: Forged EN-SeriesAxial Steel Bearings: Imported Anti-Friction Roller Bearing Roll Adjustment: Vertical and Horizontal-Mechanical

• Features: High Quality Chill/S.G. Iron/Adamite Rolls, Heavy Duty Worm Gear Type Screw Down Mechanism, Steel Fabricated Body, Mechanical / Hydraulic System
• Suitable For Joists: Up-to 600mm. Angles upto 250 x 250mm Channels upto 400mm

• Rated Power: 1-3kw
• Driven Type: Electric

We are engaged in offering an extensive range of Section Straightening Machine, which is manufactured using best available engineering technologies. Precisely engineered these Section Straightening Machines are ideal to use for types of sections salient. Our section straightening machines are widely acclaimed for their robust design and sturdiness. These can be availed in standard sizes and in various technical specifications as per the industrial demands Features : No of rolls – 10/8.Heavy duty worm gear type screen down mechanism.Suitable for all type of sections salient.Mechanical / hydraulic system.suitable for joists up to 500 mm channels up to 400 mm angles 200 x 200 mm.Steel fabricated body.High quality chill / s. G iron.Available in 130 mm roll centers to 600 mm roll centers

• Rated Power: 1-3kw
• Driven Type: Electric

• Condition: New
• Packaging Size: Standard

We are a trusted Manufacturer and Supplier of high-grade Section Straightening Machine. Fabricated from top-grade raw materials, our Section Straightening Machine is known for its exceptional durability. This Section Straightening Machine has helped us to win accolades all over the domain due to its dimensional accuracy and easy operations.

• Brand Name: AVTAR

Our clients can avail from us a comprehensive range of section straightening machines, which is ideal to be used for various types of sections salient applications. Widely acclaimed for their robust design and sturdiness, these are manufactured using excellent quality raw material and advanced engineering technologies by our professionals. Further, the expertise of our professionals enables us in offering the range in standard sizes and in various technical specifications as per the application specific requirements of the clients. technical information: no of rolls – 108 heavy duty worm gear type screen down mechanism mechanical hydraulic system suitable for joists up to 500 mm channels up to 400 mm angles 200 x 200 mm steel fabricated body high quality chill s. G iron available in 130 mm roll centers to 600 mm roll centers.

• Rated Power: 1-3kw
• Driven Type: Electric