Roofplus Raja Colony, Tiruchirappalli, Tamil Nadu

Heat moves in and out of your home (or about any other structure) in four ways: by conduction (which R-Value measures), and by convection, radiation (which S.R.I value measures) and air infiltration. Hence a minimum R value of 2.1 or 3.5 is specified by ECBC. Combination of S.R.I and R value will give the best & everlasting terrace. Roof Tiles offers solution for R value also (T&C).

Applications: Pressed Clay Tiles / Concrete Surfaces /New or Century old buildings Method Coat I: Primer Coat: Mixture of grey cement and acrylic polymer with fine sand and PPF to be brushed. Coat II: White Coat: Titanium mixed with Roof Tiles White Powder, acrylic polymer, fine sand and PPF to be brushed on Primer Coat. Coat III: White Coat: Titanium mixed with Roof Tiles White Powder, acrylic polymer, fine sand and PPF to be brushed on second coat. Coat IV: Final protective coat of Roof Tiles Nano White to be applied on white coat. Specifications are subject to change for improvement without any prior information. Remarks to be noted before ordering for white coat: Above coat system can be applied in century old buildings as well as new buildings. Can be applied on pressed clay tiles (new or very old) and concrete surfaces. Material and labor cost for four coats as above: Rs 35 per sq ft on plain area and parapet walls. Our Roof Tiles Coat is highly reflective and anti fungus but not scratch proof as good as Roof Tiles S.R.I Tiles. Under normal conditions and maintenance, expected life is over 5 years. Roof Tiles gives warranty against peel off only.  The function of water proof will remain same. Heat reflection will be better than pressed clay tiles but cannot be as good as Roof Tiles S.R.I Tiles. Heat reduction performance depends on Insulation thickness. Cool Roofs also needs insulation. Refer: ECBC User Guide for more details on Insulation. 20000 sq ft area is applied with Roof Tiles Weather Proof S.R.I Coat in DGP (Director General of Police) Office old building in Chennai.  This is a heritage building.   White Tiles Vs White Coats

Roof Tiles Weather Proof S.R.I Tiles

Roof Tiles Hollow Clay Tiles / AC Block and White Coat   Applications: New terraces where the highest performances are expected. Fix hollow tile with necessary slope to drain rain water. Plaster the surface with water proof compounds. Air circulation in hollow tiles is very much advantageous. Apply Roof Tiles White Coat over the plastered surface of hollow tiles as below: Coat I: Primer Coat: Mixture of grey cement and acrylic polymer with fine sand and PPF to be brushed. Coat II: White Coat: Titanium mixed with Roof Tiles white powder and acrylic polymer, fine sand and PPF to be brushed on Primer Coat. Coat III: White Coat: Titanium mixed with Roof Tiles White powder and acrylic polymer and PPF to be brushed on second coat. Coat IV: Final protective coat of Roof Tiles Nano White to be applied on white coat. Specifications are subject to change for improvement without any prior information. Remarks Hollow tiles or Ac block is one of the best choices for heat control. After fixing hollow tiles,  plaster the surface (half to one inch) with water proof compound. Over the plastered surface, apply Roof Tiles White Coat as mentioned above. Material and labor cost for four coats as above: Rs 35 per sq ft on plain area and parapet walls. Under normal conditions and maintenance, expected life of white coat is over 5 years. Roof Tiles gives warranty against peel off only.  The function of water proof will remain same.