Acidic Ramming Mass Dealers

Acidic Ramming Mass is generally used in coreless induction Furnaces for melting scrap. The Acidic Ramming Mass is usually made by mixing Quartz of different particle size along with some binder chemicals. The Acidic Ramming Mass is used to melt all types of iron and steel. The better the quality of the Acidic Ramming Mass, the better is the performance of the furnace. Keeping in mind the different requirements of our customers, we manufacture different grades of Acidic Ramming Mass. We have two types of Acidic Ramming Mass such as Normal and Normal Premix.

• Type: Acidic
• Color: White
• Form: Powder
• Pack SIze: 50 kg
• Best Before: 6 Months
• Usage: Industrial

• Packaging Type: Bag
• Packaging Size: 50 Kg
• Application: Metallurgy and Furnaces
• State: Crystal, Powdered
• Fe2O3: .02%
• SiO2: 98.5 - 99.5%
• Features: Wear Resistant, Optimal Bulk Density, Free from Sintering Agent

• Packaging Size: 50 Kg
• Color: White
• Packaging Type: Plastic Bag
• Application: Industrial
• Form: Stone
• Features: Precise composition, Excellent quality , Safely packed

Introduction:The role of Acidic Ramming Mass in steel melting through induction Furnance is very important. Due to its important prop­erty to with stand thermal shocks without developing any cracks due to interrupted power supply which is the case through out our conutry We have taken initiative to develop acidic ramming mass of high quality silica Quartz having heavy dencity.Product:Our ramming mass is a product of super snow white crystalline quartz havmg 99.90% Silicon dioxide (sio2 ) and manufact­ured under strict quality control and calci­ned to eliminate the spal1ing tendancy in stabilized form, where silica neither exponds nor contracts It is suitable for with standing higher temperature upto l720ocSpecifications:Sio2 - 99.90'/.Al2O3 - 0.02%Free from Iron contents Softerning Point : - 1280 CPorosity : 50Compression St : 350 Kg /CM2Bulk Density : 2.00 to 2.2 Ton/M3PCE Value ASTN No : 31-32Important Features: For the first new lining the requirem­ent of Acidic Ramming Mass is almost 50% of the Furnace capacity in weight. Remove iron or steel contents by powerful megnet. It is required to be preheated to 70'-80'C. So as to eliminate moisture during summer months In winter season or rai­ny season. the mass should be preheat­ed at a temperature of 140 o - 150 o C. then after cooling it down to 50 o - 60 o C mix thoroughly 0.8 to 1.5 percent boric acid according to the size of the crucible. Usually 12% of boric acid of medical grade is used for furnaces up to 3 tonn­es Capacity Store the Ramming mass in dry and dust free area. OUR ACIDIC RAMMING MASS Has got three Categories as under­: Grade M1 Suitable up to 1.5 Tonne furnace capacity. Grade M2 Suitable for 2 to 3 Tonne furnace capacity. Grade M3 Suitable For 5 Tonne furnace capacity . In addition to all we guarantee more lining life with our meterial compared to any other. While sending your querries and orders please do specify the capacity of furnace and type of steel you are manufacturing to enable us to give you the correct combination of Material and advise. Application : Our Addic Ramming Mass is used by mixing boric acid 0.8% To 1.5% according to the type of metal Low for Steel and high for cast iron melting. Complete lining guidance can be furnished as required according to the size of furnace Packing : Standard Packing available in 50 kg. HDPE bags & 1 or 1.25 mt Jumbo bags with liner inside, or as per customer requirements.

• SiO2: 99%
• Color: White
• Boric Acid: 1 to 1.5% as per requirement.
• Iron contents: Free from Iron contents

We offer acidic ramming mass. Acidic ramming mass is generally used in core-less induction furnaces for melting scrap. It is a dry lining refractory that can be used for melting all types of iron and steel in mini steel plants as well as in foundries.we manufacture acidic ramming mass as per the type of furnace and the furnace owners’ request. Sri venkateswara suppliers located in visakhapatnam city, we enjoy convenient access to major transportation networks. We provide our product at affordable price to the clients, guaranteeing stable and timely supply.while sending your queries and orders please do specify the capacity of furnace and type of steel you are manufacturing.

• Type: Ramming Mass
• Material: Aluminum
• Shelf Life: 1 Year
• Color: Grey
• Packaging Type: BOPP Bags, Plastic Packets
• Moisture: 0-5%
• Packaging Size: 25 Kg, 50 Kg

The Acidic Ramming Mass that we produce and offer to our most valued customer is of the supreme quality. The quality of the product is got from the use of the best quality raw materials. This product is manufactured using the contemporary technology under the supervision of the experts. This product is packed in a very efficient way. It is appreciated vastly by the customers for the quality that it holds.   Furnace Specific Benfits : We are the only far-famed manufacturer to give material as per the furnace capacity and make of the user. The granulation of the mix is optimized keeping in view the furnace make and capacity, thus giving maximum and best results.Ramming mix is strictly characterized by thermal stability, corrosion resistance and wears resistance because it contains less binders, fire clay and moisture compared to plastic refractory. Recommended for lining the iron melting coreless induction furnace. Premixed with binder to customer's specifications.Project Details : Silica 99% Min. Iron & Mica Free Pure White Aggregate in Mesh size Moisture free Minimum expansion Packaging : 50 kg /HDPE bags. Big Jumbo bags of 1.25 MT to 1.50 MT

• Color: Crystal White
• Packaging Size: 50 Kg
• State: Crystal
• Grade: A
• Application: Industrial
• Features: Safely packed, Excellent quality

Acidic Ramming Mass that we provide is used in the lining of induction furnaces. Quality of Acidic Ramming mass is directly related to the heating performance of the furnaces. Better quality of lining results in the smooth working of furnaces, optimum output and better metallurgical control. Our Acidic Ramming Mass is manufactured under strict supervision of qualified & experienced work force, keeping all these aspects in mind. Proper check is exercised on magnetic process to assure iron free material and to assure proper composition of granules according to furnace capacity. The granulation of the mix is optimized, keeping in view, the furnace make and capacity for best results. Acidic Ramming Mass, provided by us, is characterized by thermal stability, corrosion resistance and wear & tear resistance because it contains less binders, fire clay and moisture compared to plastic refractories. Our superior quality Acidic Ramming Mass is stringently manufactured under strict supervision of qualified and experienced work force. Proper check is exercised on magnetic process to process iron free Acidic ramming mass and to assure proper composition of granules according to furnace capacity. Granulometric Composition Of Commercial Acidic Ramming Mass : Size Percentage : 4 mm to 1 mm 33 % 1 mm to 0.20 mm 30 % 0.20 mm to 0.06 mm 17 % 0.06mm & Below 20 % Basic Ramming Mass : Basic Ramming Mass is suitable for induction Furnaces for production of high quality alloy steel, mild and low allow steel. Furnace Specific Benefits : We are the only manufacturer to give material as per the furnace capacity and make of the user. The granulations of the mix are optimized keeping in view the furnace make and capacity, thus giving maximum and best results. Our Acidic Ramming Mass : Recommended For Lining the iron melting coreless induction furnace Premixed with binder to customer's specifications Maximum recommended use limit - 3092oF (1700oC) We manufacture Ramming mass under completely controlled conditions and the formulation is prepared with consultations of major furnace manufacturers. It is best suited to control : Reactivity of the refractory Temperature in which reactivity takes place Sintering characteristics of the lining Density and strength of the lining

We offer clients with Acidic Ramming Mass which is useful for various applications. Our range of Acidic Ramming Mass is manufactured under a rigorous production process. The Acidic Ramming Mass available with us is highly demanded in the national and international market. Moreover, we provide customized solution to the clients as per their requirement. Characteristics : Corrosion resistantCan withstand high temperatureAccurate chemical compositionGood thermal strengthResistant against electricityFree from iron oxideHigh refractorinessAvailable in purest form Can be used for metals like : Alloy SteelsAlloy cast ironPlain carbon steels (M.S.)S.G. iron and malleable ironAll graded cast ironSS Steel

Buy immaculate quality Premix Acidic Ramming Mass at competitive rates from us. Our company is a successful Manufacturer, Supplier and Exporter of Premix Acidic Ramming Mass from Jaipur, India. Chemical composition and of the entire range is tested in the in house laboratory. The chemical compounds are preheated before mixing process, to eliminate all the moisture content. Our Premix Acidic Ramming Mass is manufactured in conformity with international quality standards.   Factor Affecting lining life of Ramming Mass : Quality of Ramming mass Carbon Percentage Homogeneous mixing of Boric Acid Quality of the melting Material Effective Ramming Operation Good Sintering Tapping Temperature Storage Condition of RM   Factor Responsible for Quality of Premix Ramming Mass : Quality of Basic Raw Material (Quartz/Quartzite) Quality of Boric Acid Powder Composition of Various grain size Moisture content in the material Foreign particles generated during Grinding process Quality of Mixing (Homogeneous mixing of Boric acid & Various grain size) Quality of Packing   Why Apala Premix Ramming Mass is Better? Chemical Composition of each & every lot of raw material is tested in the in house laboratory Consistency of source of Raw material Boric acid is procured from Supplier of Inter nation repute Quartz/Quartzite lumps are properly washed before use just to unleash it from impurities Manufacturing process includes passing of grinded grains through most effective double drum magnets Magnet plates,Magnet rods & Magnet hoppers made of very powerful rare earth magnets (10000 to 15000 gauges power) to eliminate foreign iron particles generated during grinding process The material is preheated before mixing process, to take care of moisture content if any The Manufacturing is carried out by skilled workers in strict supervision of technically sound & highly experienced persons.

Induction furnace silica ramming mass   induction furnace silica ramming mass is used in induction furnaces. It is sio2 (silicon dioxide). It is used in powder form for lining or ramming in induction furnace. We use good quality with high purity quartzite stone for the production of induction furnace ramming mass. Quartzite is broken and crushed in machines and then it is powdered.    high quality ramming mass gives longer life to induction furnace. Material produces from high quality silica is uniform in quality and physical properties. Induction furnace ramming mass is compact in comparison to other linings. Its compactness depends on the proportion of the size of the granules of powder.      proportion of the size of granules is known and granulometrics. Granulometric composition should be in such way that there should be minimum vacant or open space among the particles. An ideal granulometric composition of commercial induction furnace ramming mass is given below.    size percentage    4 mm   to        1 mm 33%    1 mm   to    0.20 mm 30%    0.20 mm to 0.06 mm 17%    0.06 mm & below 20%    proportion of the finest material is very important, as it takes part in the sintering reaction in furnace. If the fine particles are more than recommended percentage then it may lead to adverse effect of on performance of ramming layer.    please contact us for technical details of product and your requirement. We will be pleased to serve you for the best performance of your operations.

We are a leading manufacturer and exporter of Acidic Ramming Mass, based in New Delhi. This mass is used for lining induction furnaces. The heating performance of the furnaces is dependent on the quality of mass. The granulation of the mass is enhanced, keeping in mind the make and capacity of the furnace that it is being used to line. The mass has good thermal stability, is resistant to corrosion, and is durable.   Chemical Composition : Silica (Sio2) - 99.5% Alumina (Al203) - 0.04% Ferric oxide (Fe203) - 0.04% Potassium oxide (K20) - nill   Details : The Typical Granulometric Composition of commercial silica ramming mass is given below for 2.5 to 25 Ton furnace in Acidic & Premix form 0.06 mm - 6 mm.

It is quartz based ramming mix widely used in low cost melting of Mild steel, Alloy steels, Ni-hard, Ni-Resistant Chrome Irons, Ductile and Malleable Irons.The same is available in PREMIX variant where homogeneous mixing of boric acid as a binder is done.