Motion Sensors Dealers in Ayad, Udaipur

Occupancy(PIR) Sensor offers security and convenience in the areas that they cover. Occupancy sensor is an intelligent device which detects IR Rays emitted by Human Being and controls the ON-OFF operation of electrical loads. Electrical Loads can be Lights, Fans, AC for Energy Saving Application or Siren, Buzzer, Feedback to Home Automation Controller along with Lights for Security Application. This highly sensitive Sensor Element detects human movement within its detection area and automatically turns the load ON. The Loads are kept ON till the Human Movement persists in the room. The Loads are turned OFF after preset time delay if no movement is detected within the set time It has an additional in built photo sensor (dusk to dawn sensor) which can set the sensor to turn ON artificial light only when the ambient light condition (LUX Level) drops below the set value. This reduces the large amount of energy wastage and helps in making the most energy efficient system along with security. TECHNICAL DETAILS : Operating voltage: AC 110-250V 50Hz-60Hz Operating temperature: -20C~+50C Max. Load : 1000W normal Incandescent type Detecting distance: 0~7M (Related to the installation) Detecting angle: 360°(Related to the installation) Time delay: 10 seconds to 7 minutes - Adjustable Light Sensitivity : DayNight sensor - Adjustable Dimensions: 115mm Dia & 55mm Height

The product adopts good sensitivity detector, integrated circuit. It gathers automatism, convenient safe, saving-energy and practical functions. It utilizes the infrared energy from human as control-signal source, it can start the load at once when one enters detection field. It can identify day and night automatically. It is easy to install and used widely. Specification:Detection Range:360degree2.Rated Load:max.1200W3.Detection Distance: max.6m4.Time Delay:10sec to 7min(adjustable)FunctionIdentify day and night automatically. Can adjust ambient light according to your desire: when turn to SUN (max), it will work in the daytime and at night. When turn to MOON (min), it will only work under less than 3LUX circumstance. As for Adjustment, please refer to testing way. Time-delay is added continually: when it receives the second induction signal after the first inductor, it will compute time once more on the rest of the first time-delay basic (Set time) . Time-delay adjustment: it can be set according to your desire. The minimum is 10±3 sec; the maximum is 7±2min. Installation:Turn off the power. Moving the transparent vinyl cover what is in the bottom of the sensor. Loosing the screws in the connection terminal, connecting the power and rated load to connection terminal of sensor according to connection sketch map. Tighten the screws; put the transparent vinyl cover into the original station. Folding the metal spring of the sensor to upwards, until they are in "I" position with sensor, then put the sensor into the hole or installation box what is in the ceiling, the size is similar with item. Releasing the spring, the sensor will be set in this installation position. After finishing installing, the sensor could be connected the power and testing it.