Rust Converter Dealers

We are main supplier of this product.

• Grade: Industrial Grade

Rust convertor are unique solutions or primers that can be coated on iron , surface to convert rust (iron oxide) in to a protective shield. The working mechanism is that the rust convertor reacts with iron oxide, converting into a layer which becomes a barrier to moisture & prevent further rusting.

• Min. Order Quantity: 500 Kilogram,
• Port: Chennai
• Payment Terms: L/C, T/T

We are offering Rust Converter Chemicals. The Rust Converter Chemicals convert adamantly adhering rust in to an organo-complex compound, resulting in the formation of non-porous and moisture. The coating of Rust Converter Chemicals gives good mechanical stability, abrasion resistance, bond strength and excellent anti-corrosive properties. This coating of Rust Converter Chemicals is an ideal base for the subsequent protecting coat of paint, brush or dip, as needed. Available Varieties Of Rust Converter Chemicals Organic based chemicals Phosphoric based chemicals

“rust seal” is a high tech formula converts rust into a protective coating that’s ready to go as a blue-black primer and prevents future rusting in to one easy step. treated surfaces can be painted over with most top coats. “rust seal” is an industrial strength product for all your household, automotive and industrial rust problems. Application areas recommended for use on rusted iron & steels include :- *fencing and gates, pipelines, storage & fuel tanks. Farm equipments. Structural steel and overhead concrete repair work. *mail boxes, trailers. Garden tools, iron furniture & railings. *ramps, panels, utility trailers. Vehicle frames. *shipping containers, ferries, boat trailers, deck railing bridges. *transmission towers, roadside lamp post. Advantages * easy to apply. * 3 in 1 produc- – stops rust turns it to bluish black primer and prevents future rusting. * ready to use, no phosphoric and no other harmful acids. * eco-friendly alternative to sand blasting. * non-corrosive and non flammable. Directions for use *remove all the loose particles of rust, dirt, grease, oil …… *shake and stir well before using. *apply rust seal on the metal surfaces by brush. (pour only enough for the job and don’t return leftover to the container) *for best results, apply 2 thin coats. Allow 24 hour cure time before painting over with a finish coat. *avoid if possible application in direct sunshine. *clean up the hands, brush with soap and water. *use of goggles, gloves are recommended. Coverage : 120 sq.ft lit approximately packing : 500 ml, 1 lit, 520 lits. In plastic containers.

• 1 prodcut 3 solution : rust removing & Converting, De greasing, de rusting

Ts 3n1 chemical for degreasing, de rusting and phospating, for auto component & engineering coponent for before painting, it gives effetive performanve for paint coating, longer life prtotction for painted components and superior quality of paint finishing.

Neutracoat Rust Converter is a powerful oxidation converter designed for use on various steels, iron, cast iron and copper, metals & aluminum. Neutracoat Rust Converter is a aqueous solution designed to convert rust and oxidation safely and economically. The biggest advantage is that the components do not get rusty again after removing from solution which is case in Acidic Rust removers and forms black inactive layer on the metal surface which can then be painted for longer life .

• Type: Rust Converter
• Application: Industrial Use, Domestic
• Application: Industrial & Domestic
• Grade: Technical Grade
• Purity: 99%
• Form: Liquid
• Packaging Size: 25 & 210 Kg
• Propellant (Aerosol): Hydrocarbon
• Colour: Milky White To Colourless
• Touch Dry: 1 – 2 Hours
• Full Cure: 12 Hours Minimum
• Coverage (liquid – Single Coat): 15 - 20 Gms / Sq.feet
• Coverage: 400 ml Aerosol: 18 – 20 sq.feet
• Salt Spray For Primer: 700 Hours
• SIZE AVAILABLE: 5 kgs , 25 kgs – Bulk, 400 ml – Aerosol

• Application: Industrial Use
• Form: Liquid
• Brand Name: CRC
• Pack Size: 750 Ltr.
• Ph Value: 5 - 7

Neutracoat Rust Converter is a powerful oxidation converter designed for use on various steels, iron, cast iron and copper, metals & aluminum. Neutracoat Rust Converter is a aqueous solution designed to convert rust and oxidation safely and economically. The biggest advantage is that the components do not get rusty again after removing from solution which is case in Acidic Rust removers and forms black inactive layer on the metal surface which can then be painted for longer life . Neutracoat Rust Converter easily works in the nooks and crannies and all the other wetted areas eliminating the need for mechanical removal. Neutra-CoatRust Converter will save your money and time by eliminating the need for time –consuming sanding and grinding operations, not to mention the coast of labor associated with these operations. Neutracoat Rust converter can be used again and again without any issues as it works on self replenishment system. Neutracoat Rust Converter is a powerful oxidation converter designed for use on various steels, iron, cast iron and copper, metals & aluminum. Neutracoat Rust Converter is a aqueous solution designed to convert rust and oxidation safely and economically. The biggest advantage is that the components do not get rusty again after removing from solution which is case in Acidic Rust removers and forms black inactive layer on the metal surface which can then be painted for longer life . Neutracoat Rust Converter easily works in the nooks and crannies and all the other wetted areas eliminating the need for mechanical removal. Neutra-CoatRust Converter will save your money and time by eliminating the need for time –consuming sanding and grinding operations, not to mention the coast of labor associated with these operations. Neutracoat Rust converter can be used again and again without any issues as it works on self replenishment system.

• Type: Rust Converter
• Purity: 99%
• Form: Liquid
• Application: Industrial Use, Domestic Use
• Brand Name: Meproche
• Packaging Type: Drum and Can

Our company is offering quality Meproche C-21 rust converter, that is based on polyhydroxy organic compounds It is efficiently used to remove rust from stored steel and old rusted steel already erected (whether in RCC or otherwise) With the chemical Meproche C-21 rust converter, pitted surfaces can be converted into a protective coat. It is supplied in two packs. A surface treated with Meproche C 21 accepts primers and paint fast. It increases adherence of primers and paints and thus improves the life of paints It covers approximately 70/75 square meter per Kg.   Method of application: Mix 50 gms of part A to 0.950 kg. of part B Apply on the rusted surface and leave it for 4 to 6 Hrs Remove rust by wire brush Repeat the process if necessary The chemical converts the balance rust into a passive state thus stop further rusting It provides temporary solution for rust prevention. It can later be painted or lined Rubber gloves should be used while handling Meproche rust converter as it is mildly acidic in nature   Note: The information provided is based on our experience and tests conducted by us on typical specimen However, the actual working conditions are beyond our control and knowledge Hence, we are not responsible for any liability for loss, damage, injury or mishap resulted

• Form: Liquid
• Packaging Size: 1,5,10 and 20 liters
• Brand: CERA
• Packaging Type: Plastic Bottle

Rust Converter The distinctive formula of this product accounts for its dual functionality. Rust Converter 177 is a single pack ready-to-use solution which on applying converts the existing steel rust into a stable metal complex by forming a polymeric film over it. The Polymeric film acts as a protective and passivative coating preventing further corrosion which in turn acts as an ideal base for painting.

• Converts existing rust into stable metal complex, forms protective coat and prevents further rusting: Eliminates complicated usage of sand blasting,wire brushing and mechanical grinding, saving time and labour

Rust Converter 177 is an innovative product based on the latest technology in rust converters. The distinctive formula of this product accounts for its dual functionality. Rust Converter 177 is a single pack ready-to-use solution which on applying converts the existing steel rust into a stable metal complex by forming a polymeric film over it. The Polymeric film acts as a protective and passivative coating preventing further corrosion which in turn acts as an ideal base for painting.Rust Converter 177 reacts with all the layers and forms a stable non-reactive complex organo-metallic surface having bluish-black colour. In addition, this innovative product arrests the migration of ions, preventing electro-chemical corrosion process and prolongs the paint life for a reasonable period of time, resulting in considerable savings.