Active Filters Dealers in Vadodara

Air-Tech's Activated Carbon Filters are designed and used for the removal of vapors which still may be present within the air or gas flow. The activated carbon element absorbs vapors and binds them to the surface of the activated carbon grain molecules. The Activated Carbon Filters are used mostly in medical, pharmaceutical, electronics, semiconductor, hospitals, and oil-free applications. Atcivated Carbon Filters are mostly used after the Lubricated type Air Compressor for eliminating the Oil vapors from the compressed air. The filter element filled with Activated Carbon removes the oil vapors down to 0.003 ppm and are drained out by the Auto Drain Trap or manual Drain Valve provided at the bottom of the Activated Carbon Filter.   Application of Activated Carbonb Filter:  Oil Free Application Electronics Medical Pharmaceuticals Semiconductor

• Filtration Capacity: 0-5 t/h
• Shape: Square
• Condition: New
• Weight of Filtering Material: 0-200 kg
• Inlet and Outlet Diameter: 0-40 mm
• Filter Thickness (in mm): 8 mm

• Filtration Capacity: 10-20 t/h
• Inlet and Outlet Diameter: 80-120 mm
• Installation & Maintenance Required: Yes
• Weight of Filtering Material: 400-800 kg

Being a customer oriented organization, we are deeply engaged in offering a wide array of Activated Carbon Filter. Details: Carbon filtering is a method of filtering that uses a bed of activated carbon to remove contaminants and impurities, using chemical adsorption. Each particle/granule of carbon provides a large surface area/pore structure, allowing contaminants the maximum possible exposure to the active sites within the filter media.

Harmonic capacitor is specifically designed to carry a wide spectrum of harmonic and fundamental currents without overloading. Application Harmonic capacitor is specifically designed to carry a wide spectrum of harmonic and fundamental currents without overloading It is designed for higher voltage capacitor to allow increased Voltage due to introduction of series reactor Analyses and provides information on network characteristics Controls the reactive power required to obtain the target power factor. Monitors and provides information on equipment status. Communication possible on the Mod bus network.

• Removes odor, bad taste, chlorine and lead: Can be used for pre-treatment
• Available in powdered or granule carbons: CTanks available in FRP or Epoxy MS
• Maximum carbon utilization: NABL testing certificate
• Custom size configuration: Manual or automatic operation

Activated Carbon Filter is widely accepted system in water filtration techniques. The treated water is free from chloramines (chlorine and ammonia mixture) and organic compounds; therefore, best for discharge and production use. Activated Carbon Filter is also utilized in pre-treatment for ro water plant and dm plant as the treated water keeps these systems safe from oxidation or organic fouling. Activated Carbon Filter Working Principle An activated carbon filter (ACF) works on the principle of adsorption; filter medium adsorbs or reacts with a pollutant molecules then filtered water is drained out. Activated carbon which is used as medium to remove contaminants is natural material derived from coconut shell, lignite, bituminous coal etc. further, activated by chemical or steam under absence of oxygen with high temperature around 1000°C. Specific contaminants can be removed by employing blends of various carbons. Activated Carbon Filter Working Principle There are some limitations of activated carbon filters (ACF); uses are limited to wastes with low organic concentrations (< 5%) and very low inorganic concentrations (< 1%). Removing highly soluble organics or those with low molecular weights are also out of their capabilities. An activated carbon filtration system is unable to remove all of contaminants; such as, microbes, sodium, fluoride and hardness from water; however, special activated carbon water treatment is necessary for removing lead and other heavy metals. In addition, disposal process of contaminated carbon is complicated if not regenerated. Which Activated Carbon is Right For You? There are two types of activated carbons available, Granules Activated Carbon (GAC) and Powdered Activated Carbon (PAC); choosing which one is best suitable for your application is not a difficult task. In general, Granule Activated Carbon is made by steam activation of coal and is widely used in purifying drinking water, whereas Powdered Activated Carbon is produced by steam activation of lignite coal under carefully controlled conditions and is used in treating (remove toxic organics along with BOD, COD and TOC) industrial wastewater, process water and highly contaminated municipal wastewater. Activation Carbon Filter Design & Installation We design, manufacture and install activated carbon filters (ACF) for industrial, commercial and domestic water treatment. Our ACFs utilize special highly activated carbons and are configured to meet industry specific requirements and flow rates. Often called pressure carbon filter (PCF), these filtration systems assure optimal carbon utilization, widely used in laboratory, commercial and industrial water treatment applications, where these units play a crucial role in pre-treatment for reverse osmosis, deionizer and softener plants. As an option, these ACFs are also fitted with steam sterilization system for regeneration of activated carbon bed.From hundreds of nationwide installations, we have gained necessary technical experience in activated carbon filtration that makes us confident in providing you right suggestions and budgetary quotations. We assure you of competitive price, unmatched water quality and dedicated after sales support anywhere in India.

media filter, Water Treatment

Micron Filters, Softening Plant

Activated Carbon Filters, Agitators, Clarifiers

pressure send filter