Adhesives,Glues and Sealants Dealers in Karelibaug, Vadodara

To make payment procedures crystal clear and secured as well, we have trustworthy employees and they make certain that the transactions are done keeping in mind the guidelines and clients' convenience. Ours is a well-established organization that is located in Vadodara(India) and involved in catering to the customers based within and outside the boundaries. Features : Optically active Purity Accurately formulated

• Colour: White, Ivory, Pink, Brown, Black
• Joint width: up to 3 mm
• Consumption: Varies depending on the size, thickness of the tile and width of joint
• Pot life: Approx, 1 hour, may vary due to temperature & other conditions
• Packing: 500 mg,1kg, 20 kg

High Performance Tile Adhesive for Ceramic and Vitrified Tiles, Granite and Marble Advantages:  Self curing adhesive  Flexible, shock and Impact resistant  Easy to use  Fast and economical  High bond strength SURFACE  PREPARATION Clean the substrate of oil stains and also remove dirt, dust and laitance, if any, using high pressure water jet or any other suitable method. Ensure that the substrate is flat, stable, well adhered and has a normal absorption. Concrete screeds, plastered surfaces, block work and renders should be sufficiently cured to avoid shrinkage cracks. Correct the local undulations/damages on the substrate at least 48 hours before the application of MINAR TILE FIX Saturate the surface well and remove excess water before application of the tile adhesive. MIXING RATIO Gradually add 3  parts of powder to 1 part of water (by volume) and After mixing allow the paste to stand for 2 minutes for it to mature. TILE FIXING Apply MINAR TILE FIX over the surface using the straight edge of the notched trowel and then comb the applied adhesive on the notched side of the trowel to achieve the desired thickness. If the adhesive is buttered to the tile, then ensure proper coverage of tile surface to avoid voids. Firmly press the tile into the adhesive to ensure good initial bonding. CONSUMPTION For 3mm bed thickness the coverage will be 4-4.5 kg/sqm Note: The coverage will vary depending on surface undulations SHELF LIFE 1 year from the date of manufacturing, for unopened bags, stored in a dry condition. Tile Grout TECHNICAL DATA PREPARATION: The Joint filling can be done after 24 hrs of tiling. The joints should be clean. Tile Fixing adhesive should not rise over half the depth of the joints. Excess mortar should be removed. MATERIAL MIXING: Quantities up to 500mg may be mixed by hand. Mix Minar Tile Grout with 175 to 200 ml of clean water to a smooth consistency. For larger quantities, use a mechanical mixer until mixture is homogeneous - firm smooth paste. Use immediately APPLICATION: A rubber trowel may be used for applying the grout. The grout is applied diagonally over the tiles and pressed firmly into the joints until they are completely filled. Excess grout on tiles should be removed. The grout should be allowed to dry for 15 to 30 minutes depending on temperature and humidity. A damp sponge is then used to clean the tile surface. Use as little water as possible for cleaning the joints and the tiles. To make cleaning easier, unglazed tiles should be moistened with a damp sponge before grouting. Tile surface is left to dry before final wiping with dry cloth. While wiping and polishing, do not rub the joints too hard. In dry conditions, curing may be necessary. STORAGE Store in a sheltered and dry place

Dextrin is degradation product obtained by treating starch under carefully controlled conditions. Dextrin is made by heating starch in dry form with small amounts of catalyst. Dextrin is White or Yellow Powder that is partially or fully water-soluble, yielding optically active solutions of low viscosity. There are two types of Dextrin such as White Dextrin which has an appearance of the native starch and has solubility varying from 25-80%. It forms a soft, light coloured gel on cooling. The other one is Yellow Dextrin which ranges in colour from pale yellow to dark brown and has high water solubility. It is used to produce high solid concentration pastes. Apllications Adhesive Industry:One of the main ingredient in manufacturing of liquid and dry adhesive is yellow dextrin as it goes into solution instantly with a lesser quantity of water. Also, because of their greater adhesive strength and fluidity, it is widely used in the manufacture of: Spiral and convolute tubes. Carbon paper manufacturing, abrasives and in dry distemper. Machine labelling of tins, cartons, packages, envelopes, corrugated boxes etc. Also used by crackers manufacturer due to its adhesive properties & also explosive character. In book-binding, paper cones & tubes, carton sealing, cigarette pasting, match-head & match box making. Chemical & Dyes Industry: The advantage of Dextrin in the dyestuff industry is that they wash out quickly and easily and do not react with chemicals used in the process. It is so well recognized that many large-scale manufacturers have started using highly soluble Dextrin as diluent to standardize the dyes with respect to the range of colours. Textile Industry: As Dextrin do not easily react with chemicals, they are specifically suitable for applications in the textile field. In textile printing, they are used as thickeners. In sizing, they are used with starch for increased adhesiveness. In finishing, they give desired ‘feel’ and handle to the fabrics. Paint Industry: Dextrin is largely used in dry distemper. Two to three per cent of dextrin, mixed with chalk and pigment, acts as a carrier and imparts good adhesion of the paint to the wall.

Cement, Flour, tuwar daal, Transformers, Switchgears, Scampi, Relays

Cement, Building Materials, steel Products, Steel Bar, steel

Cement, Plasticizers

ADHESIVE, Sanitaryware, Ceramic, glazed, Mosaic, Bathroom Fittings

Anti Tyre Puncture Sealant

Cement

Cement, Dr. Fixit Water Proofing Chemicals, water proofing chemical

ADHESIVE, Ball Valves, connector stud, Paints, Sealants

Adhesives

loctite thread sealants, Dry Sanding Velcro Discs, Sliding T Handle

Cement

screen adhesive

Cement, Aggregate, Sand