Industrial Air Conditioning System Dealers in Vadodara

• Brand Name: TermiPore
• Material: EPDM
• Shape: Round
• Color: Black
• Application: Industrial
• Feature: Fine Finishing, Light Weight
• Type: Air Diffusers
• Country of Origin: India
• Air Flow Rate: 3 (m3/h)
• Type of Aerator: Diffused Aerations
• Bubble Diameter: 3 mm

• Brand Name: Chemiquip
• Place Of Origin: Vadodara  
• Usage: To exchange the Heat between Air/Gas on one side & Air/Gas/liquid on other side
• Types: Integral Fin, L Type Fins, Plate Fin, G Type Fins, Spiral Tension Wound Tubes
• Conditiont: New, Good
• Product Type: Air Fin Coolers

Our company is enagaged in manufacturing, exporting & supplying of Air Fin Coolers. Air Fin Coolers is used to exchange the Heat between Air/Gas on one side & Air/Gas/liquid on other side. We use External Fins in the Air Fin Coolers to increase the heat transfer area. The fins are selected on the basis of parameters like fouling nature of the air/gas, air/gas to be cooled, available area, etc. The common types of fins are : Integral Fin The Tubes are finned on the OD of the Tube This increases the Heat Transfer Area of the Tube by 3 to 3.5 Times as compared to Plain Tube, with a minor increase in the cost These Tubes find applications in the AC Plants/Oil Cooler, Condensers, etc. Carbon Steel, Stainless Steel, Copper, Copper Alloys can be finned L Type Fins The aluminium strip foot section is first formed into an L shape and then tension wrapped on to the base tube Wound fin base sections are close to each other so as ensure a continuous cover over the primary tube surface Finally, the fin strip is fastened at ends to prevent loosening Plate Fin Plate Fin generally consist of a thin strip of either aluminium, Galvanized Iron, Copper etc which is slipped over the OD of the Tube Necessary operation is done to ensure proper contact between the OD of the Tube and Tube Hole ID of the Plate Fin The Pitch of the Holes in Fin is accordingly to the Tube Layout of the Tube Sheet G Type Fins The aluminium strip foot section is first formed into an L shape and which is tension wrapped and embedded into the primary tube wall These type of tubes have better life vis a vis the L type of Fins find applications in Refineries Spiral Tension Wound Tubes Here Plate Fin is tension wound spirally on the od of the tube, ensuring proper contact between the OD of the Tube & Plat Fin Plate Fin material can be Aluminium, Carbon Steel, Copper, while Tube material can be Carbon Steel, Stainless Steel, Copper, Copper Alloys, etc.

• Material: Metal
• Shape: Rectangular
• Application: Busbars Use
• Feature: Accuracy Durable, Corrosion Resistance, High Quality
• Type: Bus Duct
• Country of Origin: India
• Powder: Upto 4000 Amps
• Suitable for: Indoor & Outoor Both

Electrical Bus Duct Supplier An electrical bus duct, or so-called busway, is a kind of electrical distribution system. It is widely used to efficiently and safely deal out electrical power within a building or ability. It consists of a series of metal enclosures that house busbars and are planned to carry high currents over a distance while adding power to different loads. Bus ducts offer an alternative to conventional cable distribution systems, providing a flexible, modular, and compact solution. Are you looking for the best quality of electrical bus duct? Yes. Pace Technologies is readily available to serve your needs. We are working as a leading electrical bus dump supplier. All the products are best known for their high durability and performance. We offer a wide range of panels with the best quality at a reasonable cost. Features of Electrical Bus Duct Accuracy Durable, Corrosion Resistance, High Quality Works on the power Up to 4000 Amps Works equally for Indoor & Outoor Made in metal material Available in a rectangular shape Busbars Use If you have more questions and queries about the Electrical Bus Duct Supplier, you can contact our team for more information.

• User friendly: Automatic operation
• Equipped with adequate sized built-in water tank and pump set: Minimum floor space required
• High efficiency shell & tube type condenser designed for peak conditions: Easy to integrate into existing plant
• High efficiency Evaoperators: Digital Temperature Indication and Controller ensuring rapid and accurate sensing
• Powder Coater Steel Cabinet: Easy to integrate into existing plant
• power saving compressor with high energy efficient ration: Manufactured accoring to the Safety Regulations

We are offering Chilling Plants. we are given prime importance to customers satisfaction in giving quality and meeting their requirement in totality. covering a wide range capacities upto 120 trs (in either or ammonia as refrigerant) to cater the requirement of application as enlisted below application : chemicals, comfort cooling, diamond industry, dyeing / bleaching industry, edm machine cooling, food products : milk & dairy, pasteurizing, induction heat treatment. lighting, lubricant / oil cooling, mineral water / soda process, paper and pulp processing, plating and anodizing, plastic process : blow molding, injection molding, extruders, pvc pipes, pp film lamination, woven sacks, plastic and rubber calendars, pharmaceuticals, printing ink/ paper waxing cooling, vacuum metalizing in case, you regularly require specific models to suit to your requirement, we can certainly work out for such arrangement with compact chillers, which may turn to be economical, power saving, maintenance free, user friendly, noiseless and better in performance.

• Material: Glass
• Application: Industrial Use
• Weight: 7-105kgs
• Voltage: 380V
• Keep the Maximum Coolant Pressure to: 2.7 Bars.
• Features: Durable

Coil Condensers Coil Condensers are commonly used for the process of vapor condensation as well as examines the cooling of liquids. Condensers are manufactured by binding many parallel coils together in a glass shell. These coils are built of different diameters using various bore tubes.   Design of Coil Condenser The Coil condensers are commonly used to separate or remove heat from refrigeration or an air-conditioning system. Occasionally they are accustomed to the intention of heating the air streams. Coil condensers are among the four essential components in an air-conditioning or the refrigeration cycle. The refrigerant then enters the system as a superheated gas and gets condensed in the coil tubes. The refrigerant then leaves the coil in the form of a liquid.   Methods of Using the Coil Condensers Vapors from bottom It is effortless to install the Vapor method over a reactor. However, it may result in the condensate to return at its condensing temperature. You must be careful while working with this method that the condensate must not be in excess, and it must not lead to the blocked coils and create back pressure. Usually, the use of a reflux divider is advised to be installed below the condenser that will take the distillate out.   Boilers Boilers are usually used for the evaporation process carried out for various liquids by passing the hot steam through the coils. Boilers are manufactured by combining many parallel coils in a glass shell. The coils in the boilers are specially designed to provide you with a much bigger cross-section than Condensers.   Angled Hose Connector Assemblies Angled hose connector assemblies are usually made from either metal or plastic and must connect the condensers to the flexible hose. These can be provided with a rubber gasket, a mating flange, and nut bolts.   Immersion Immersion-type heat exchangers are generally used to control the exothermic reaction happening in the glass vessels. Immersion-type heat exchangers can be used along with the vessels that have a bigger and wider bottom outlet. Such heat exchangers come with a central hole in the coil battery so that a stirrer can be mounted at the bottom of the heat exchanger.   In most of the applications, the cooling water is usually used in the coils with a maximum pressure of 2.7 bar g; you can also use them along with the hot steam having a maximum pressure of 3.5 bar g. In the latter case, all the coils are entirely immersed in the liquid. Immersion procedure is not advised to use with the products having crystallization tendency.   Product coolers Product coolers are generally used to cool various types of liquids that are used for the process of cooling the distillates in the distillation system. Unlike other coil condensers, among the product coolers, the product passes through the coil battery, and the coolant passes through the shell. This transfer process will give the product more time to get cooled.   Preventive measures while using coil condensers Let the vapors pass via shell only. Keep the maximum coolant pressure to 2.7 bars. Coolant flow must be adequate for the process. The use of steam in the coil is prohibited. Coolant must be heated but not to its boiling point. Turn the coolant control valve slowly. Let the coolant drain freely. You can use coils made from brine in a closed circuit. Connect the water main to a flexible hose. Ensure water left in the coil doesn’t freeze. Condensers must be mounted only in a vertical position   Final Thoughts Ablaze Export Pvt. Ltd. is one of the leading Coil condensers manufacturers in India. We are into the production of many standard chemical process equipment as well as we also provide customized process equipment. We have years of experience serving customers across India as well as delivering our products across the world.

• Automatic Grade: Automatic
• Power: 1-3kw
• Driven Type: Electric
• Color: Blue
• Voltage: 240-415 Volt (v)
• Application: Laboratory / Hospital
• Usage: Industrial

• Material: Aluminium
• Feature: Water Proof, Tamper Proof, Corrosion Resistant, Durable Coating
• Max Working Pressure: 150 PSI
• Working Temperature: 1 to 60 deg C
• Thickness: 6mm - 8 mm
• Surface Treatment: Clear anodized, Mill finish, Powder coat

• Material: Aluminum
• Louver Type: Adjustable and Combination Louver
• Opening Pattern: Horizontal
• Application: Ventilation
• Size: 1 x 2 meter
• Size/Dimension: mini 600x1000 max 4.5x2.5

We are a leading Manufacturer of louver from Vadodara, India.We are among the reputed organizations, deeply engaged in offering an optimum quality range of Louver.Features: Precisely designed Impeccable finish Enhanced durability

• Country of Origin: India
• Size: 4
• Type: Air Damper
• Material: PP
• Diameter: 4inch,6inch, 8inch, 10inch, 12 inch with and without flange
• Shape: Circular
• Thickness: 0-5mm
• Grade: INDIAN
• Color: Grey
• Feature: Corrosion Resistance, Durable, High Quality
• Technics: GREY
• Surface Finishing: PLAIN
• Certfication: Indian Standdard
• Brand Name: PLF