Air Dryers Dealers in Makarpura, Vadodara

We manufacture and supply a wide range of Refrigerated Dryers, Desiccant dryers, Water/Air Chilling Plants and other Compressed air Accessories which are used by various industries. Our product range encompasses Refrigerated Dryers works on Heat Transfer principle. Saturated compressed air enters the Pre-cooler / Re-heater (air to air heat-exchanger), where it is pre-cooled by exchanging heat with the outgoing cold air, which reduces heat load to evaporator. The inlet air is further cooled in the evaporator (air to refrigerant heat exchanger) to the required dew point. The cold air is then reheated when it passes back through the air-to-air heat exchanger (precooler/reheater). A refrigerant compressor and condenser supply low-temperature refrigerant to the evaporator. The thermostatic expansion valve and the hot gas bypass valve match the operation of the refrigerant system to the compressed air cooling load. In the evaporator, heat is transferred from the compressed air into the refrigerant.The process cools the air, reducing its capacity to hold water vapor and resulting in moisture condensation. The excess vapor condenses and is removed from the air system by a separator and automatic drain valve. Our consistency in continuous improvement in design for renovating small model results into tube-in-tube type dryer. The copper tube-in-tube design provides maximum surface area which results in optimum heat transfer   Features & Advantages Non-Cyclic Operation Load handling Capacity 0 to 100% without Freezing Constant Dew point Customized Air/Water models Special controls for Constant Evaporating and Condensing temperature. Low Energy Consumption Eco Friendly

Owing to our well-maintained and organized inventory system, we deliver the same in the committed time. Customers can provide their specifications to us in regards to the packaging of the products as we serve customized packaging requirements. We ensure damage-free products at customer's end.Description for working : A Heatless compressed air dryer is the desiccant air dryer for achieving a dew point of -70oC or better. Process - Incoming compressed air is dried with refrigeration dryer then it passes through carbon filter, pre filter passes through the slide piston valve assembly and is directed towards absorber chamber I where the compressed air passes through the high quality of desiccant. Compressed air drying takes place by absorption. Dry compressed air from absorber chamber I is then passes though the check valve assembly and then through the after filter to the transformer. While compressed air is being drying in chamber I the desiccant in chamber II where the desiccant has been wetted in the previous cycle is being simultaneously regenerated. The chamber II is depressurized to the atmosphere through the purge valve in the downward direction. A portion of the dry compressed air passes thrugh the needle valve / orifice plate through the desiccant and flushes out the desorbed moisture. When the regeneration is complete, the purge valve is closed and the tower is slowly depressurized to line pressure for a smooth changeover. Efficient dew point of - 70oC or better can be achieved through effective drying system comprising of refrigeration dryer and Heatless Air Dryer. For Continuous measurement of the quality of the air online digital dew point meter can be provided on request.

• Type: Refrigerated Air Dryer
• Brand Name: DOLPHIN
• Place of Origin: Vadodara
• After-sales Service Provided: yes

Manufacturing and supplying technically superior and functionally efficient range of refrigerated compressed air dryer has helped us gain acknowledgement in the industry. Our range of products is appreciated for its excellent quality and durability. We are dedicated to maximize our clients̢۪ satisfaction by offering our quality tested products. These products are known for their power saving capacity and compact designs. Our range of refrigerated air dryers meet international quality standard. These products ensure silent and reliable performance.

Features :- Innovative counter flow drying technology Uniform drying Adjustable drying period Adjustable chamber temperature up to 100ËšC Easy to install & maintain Acquires lesser floor area

We are a well-known Manufacturer and Supplier of robustly constructed No Loss Split Flow Type Dryer. No Loss Split Flow Type Dryer, offered by us, is fabricated with the best quality components. The No Loss Split Flow Type Dryer is precision made and is known for offering high performance. Silent Features : No purge lossLow dew pointLow pressure dropLow energy cost for given dew pointCompactReady to useReliable design & componentsAvailable to various standardsDew point based tower changeover controlsLow cost of total ownershipExtinctive operation & maintenance manuals The wet air entering the dryer first comes in contact with the ceramic element of the Pre-Filter.Here solid impurity up to 5 microns and water droplets are effectively removed. Now, saturated wet air (free of contaminants) enters the distribution box which splits the air stream and diverts it partly to the heater for heating and partly for adsorption. The stream going for adsorption enters via the top four-way valve to the Adsorber tower, which is packed with desiccant. This Desiccant has a high surface area to porosity, which enables to hold large quantities of moisture from the compressed air. It also possesses the property of giving up this moisture on heating. Dry air leaving Adsorber from the bottom via the four-way valve enters the After Filter. The After Filter alike the Pre Filter has ceramic elements which prevents the desiccant dust carry-over into the system. Going back to the distributor box, the second stream leaving the distributor passes through the heater where it is heated to the reactivation temperature of 180 Deg C. This hot air leaving the heater passes through the tower to be reactivated via top four-way valve. On its way through the tower, it carries the moisture adsorbed by the Desiccant (in the previous cycle) and leaves the tower via the bottom four-way valve. Now, this wet air enters into the Reactivation cooler where it gets cooled to 40 Deg C and the moisture in the air condenses which is removed by the Moisture separator. This air stream again joins by the main stream through the distributor. Hence, in this process, there is no loss of compressed air. The change over of the Adsorber tower is accomplished by a linkage mechanism connecting the two four way valve shanks. A double acting pneumatic cylinder actuates this linkage. The timing of operation of this cylinder is controlled by a four-way solenoid valve, which in turn is controlled by the timer in the control panel. The air actuating the solenoid valve is first lubricated in an oil lubricator before entering the pneumatic cylinder. The air used for this purpose is dry air and is tapped from the after filter. Two limit switches control the travel of the linkage mechanism.

• Certification: CE Certified
• Weight: 100-150kg, 150-200kg, 50-100kg
• Color: Brown, Grey, Light White, Shiny Silver, Silver, White
• Voltage: 110V, 220V, 380V, 440V
• Condition: New, Used
• Power: 1-3kw, 3-6kw, 6-9kw, 9-12kw
• Warranty: 1yrs, 2yrs, 5yrs
• Application: Vapor Removing
• Automatic Grade: Automatic, Fully Automatic, Manual, Semi Automatic
• Driven Type: Electric

We are engaged in offering a comprehensive range of Rotating Air Rings for LLD Film Plant, which is known for their unmatched quality and durability. These are constructed using supreme quality raw material and are available in various sizes and models. Keeping in mind the variegated requirements of our patrons, these can offered in customization solutions. Moreover, these are quality tested to ensure high performance and longer service life. Customers can purchase these from us at pocket friendly prices. Features: Easy to install Available in various models Maintenance free Specification: Exits Multy Double Lip Layer Rotating with Aircon

Solar Air heating systems can provide pre-heated air for various processes. This can reduce consumption of diesel and gas which is traditionally used for heating of air.

The heatless dryer consists of 2 towers which, alternately cycle on drying and regeneration. Each tower is filled with a bed of adsorbent desiccant. The tower on drying cycle adsorbs the moisture from the incoming wet air. The tower on regeneration uses a small portion of the dried air passing through the desiccant to remove the adsorbed moisture. This air is later vented to the atmosphere. The cycle is maintained using a control panel.

• Air Dryer: Filter
• Heatless Dryer: Bag Filter

we offer Air Dryer. is the first joint venture company in India to Design, Engineer, Manufacture , Market & Service high efficiency purification equipment meeting demanding international quality standards Ever since its inception at Bangalore in 1986, the company has been seeking out new state-of-the-art filtration & drying technology to broaden its customer base by offering a wide range of products to meet customer demand of various application.  Compressed Air Filters  Process Filters  NG Filters  CNG Filters  Refrigerated Air Dryers  Desiccant Air Dryers

Desiccant Dryers, Dehumidifiers, Desiccant Rotors, Silica Gel

Desiccant Air Dryer, Refrigerated Air Dryer, Air Compressor, Air Dryer

Air Conditioning Plant, chiller unit, Water Chiller, Milk Chiller

Compressed Air Dryers, Heatless Dryer, Air Dryers

Compressed Air Dryers, electronic drain valves, High Pressure Receiver

Air Dryers, refrigerated type compressed air chiller

Air Dryer, vaccum filtration systems, Air Dryers