Air Dryers Dealers in New Sama Road, Vadodara

We offer Heatless Type Air Dryer. Operating Principal: In Heatless Dryers, two vessel filled with desiccant are provided which cycle automatically, producing dry air continuously. In these units, wet air enters the bottom of one Vessel and passes upwards through the desiccant bed where the moisture is adsorbed. The dry air comes out from the top. A small portion of dry air is passed downwards through the desiccant bed in second vessel, which is under re-generation. Moisture laden purge air is then vented out to atmosphere. The purge loss is around 7.5% of the total air flow. At preset interval, the vessel changeover automatically, and Dry air is available continuously, without any surge. Easy Operation: This is simplest type of air dryer with Activated Alumina / Molecular Sieves drying agent. This is virtually maintenance free, fully automatic, and requires no attention for year heatless type dryers do not require any heating for re-generation and therefore are very simple in design and maintenance free. Low Operating Cost: • Due to its inherent simple design, investment in this type of dryer is the cheapest and the payback on this investment is very quickly. • Low Temperature operation reduces corrosion in tower and desiccant lasts longer. • Power requirement is 60 watt only for Solenoids Valves Operation. Capacity: • Air Capacity: 5 to 10000 NM3/Hr. • Dew Point : Up to (-) 60°C • Operating Pressure: 5 to 35 Kg/cm2g

SIGMA-Dry Made from activated aluminium oxide, the desiccant has an exceptionally high adsorption capacity and its regeneration capability provides sustained low pressure dew point performance with minimal pressure loss. The desiccant is also waterproof and mechanically stable, which makes it particularly suitable for long periods of operation. Furthermore, specific pellet sizes are available to ensure optimal performance of flow diffusers and sieve plates. Air Flow Rate : 0.15 to 154.53 m³/min (5 CFM to 5457 CFM)

• Voltage: 440V
• Body Material: Stainless Steel
• Frequency: 50Hz / 60Hz
• Phase: 3 Phase
• Power Source: Electric
• Usage: Industrial

They are prefabricated to simplify transportation, installation and commissioning. Many plants undergo a factory test before dispatch to minimise installation and start-up times. MINIGAN is a standard cryogenic plant for production of high purity nitrogen gas and is suitable for outdoor installation. This plant range is based on liquid inject technology with production rates of up to 2600 Nm³hr, with purity levels up to 99.9995% as standard. MINIGAN comprises modules of the warm end and the coldbox.

• Material: SS
• Automatic: Automatic
• Country of Origin: Made in India
• Automation Grade: Automatic
• Air Flow Rate: 40 to 5400 scfm
• I Deal In: New Only

Hot Air Dryer, Hydrogen Gas Generator, Industrial Gas Generators