Air Dryers Dealers in Vadodara

• Special controls for Constant Evaporating and Condensing temperature.: Low Energy Consumption

Refrigerated Dryers works on Heat Transfer principle. Saturated compressed air enters the Pre-cooler Re-heater (air to air heat-exchanger), where it is pre-cooled by exchanging heat with the outgoing cold air, which reduces heat load to evaporator. The inlet air is further cooled in the evaporator (air to refrigerant heat exchanger) to the required dew point. The cold air is then reheated when it passes back through the air-to-air heat exchanger (precoolerreheater). A refrigerant compressor and condenser supply low-temperature refrigerant to the evaporator. The thermostatic expansion valve and the hot gas bypass valve match the operation of the refrigerant system to the compressed air cooling load. In the evaporator, heat is transferred from the compressed air into the refrigerant.

We provide Compressed Air Dryers made by our Principals – Puriflair India Pvt. Ltd. The dryers are Desiccant or Refrigerated type depending on desired moisture content of the compressed air. We offer different desiccant dryers ranging from simple heat less to heated type (heat of compression, blower or no loss type) dryers. We are considered to be one of the foremost Air Dryers Suppliers in India. Besides these, we also provide various accessories like after coolers, compressed air filters, receivers or storage vessels and drain valves. Variety : Refrigerated Type DryersDesiccant Type Dryers Features : The flow rates start from 5 m3/hr and can be manufactured up to any size.Standard pressure is 7 kg/cm2 but low as well as high pressures dryers can also be supplied. High pressure dryers are used for PET bottling application.In the refrigerated type dryers, the incoming air is cooled to 2 to 3 degree C, thus removing any moisture present in the air. By using suitable heat exchangers, the temp of air at outlet is closer to ambient temperatures. Applications : Desiccant Dryers : Used when moisture in compressed air is required to be very low. There are mainly of two types - The Heatless and the Heated type.Heatless Dryers : Used generally for low flow rates.Heated Dryers : Used for higher flow rates.

Features :- Innovative counter flow drying technology Uniform drying Adjustable drying period Adjustable chamber temperature up to 100˚C Easy to install & maintain Acquires lesser floor area

Owing to our well-maintained and organized inventory system, we deliver the same in the committed time. Customers can provide their specifications to us in regards to the packaging of the products as we serve customized packaging requirements. We ensure damage-free products at customer's end.Description for working : A Heatless compressed air dryer is the desiccant air dryer for achieving a dew point of -70oC or better. Process - Incoming compressed air is dried with refrigeration dryer then it passes through carbon filter, pre filter passes through the slide piston valve assembly and is directed towards absorber chamber I where the compressed air passes through the high quality of desiccant. Compressed air drying takes place by absorption. Dry compressed air from absorber chamber I is then passes though the check valve assembly and then through the after filter to the transformer. While compressed air is being drying in chamber I the desiccant in chamber II where the desiccant has been wetted in the previous cycle is being simultaneously regenerated. The chamber II is depressurized to the atmosphere through the purge valve in the downward direction. A portion of the dry compressed air passes thrugh the needle valve / orifice plate through the desiccant and flushes out the desorbed moisture. When the regeneration is complete, the purge valve is closed and the tower is slowly depressurized to line pressure for a smooth changeover. Efficient dew point of - 70oC or better can be achieved through effective drying system comprising of refrigeration dryer and Heatless Air Dryer. For Continuous measurement of the quality of the air online digital dew point meter can be provided on request.

We offer Heatless Type Air Dryer. Operating Principal: In Heatless Dryers, two vessel filled with desiccant are provided which cycle automatically, producing dry air continuously. In these units, wet air enters the bottom of one Vessel and passes upwards through the desiccant bed where the moisture is adsorbed. The dry air comes out from the top. A small portion of dry air is passed downwards through the desiccant bed in second vessel, which is under re-generation. Moisture laden purge air is then vented out to atmosphere. The purge loss is around 7.5% of the total air flow. At preset interval, the vessel changeover automatically, and Dry air is available continuously, without any surge. Easy Operation: This is simplest type of air dryer with Activated Alumina / Molecular Sieves drying agent. This is virtually maintenance free, fully automatic, and requires no attention for year heatless type dryers do not require any heating for re-generation and therefore are very simple in design and maintenance free. Low Operating Cost: • Due to its inherent simple design, investment in this type of dryer is the cheapest and the payback on this investment is very quickly. • Low Temperature operation reduces corrosion in tower and desiccant lasts longer. • Power requirement is 60 watt only for Solenoids Valves Operation. Capacity: • Air Capacity: 5 to 10000 NM3/Hr. • Dew Point : Up to (-) 60°C • Operating Pressure: 5 to 35 Kg/cm2g

• Type: Compressed Air Dryer
• Certification: CE Certified, ISO 9001-2008 Certified
• Color: Brown, Grey, Light White, Shiny Silver, Silver, White
• Voltage: 110V, 220V, 380V, 440V
• Condition: New, Used
• Warranty: 1yrs, 2yrs, 5yrs
• Application: Water Vapor Removing
• Automatic Grade: Automatic, Fully Automatic, Manual, Semi Automatic
• Driven Type: Electric, Hydraulic, Mechanical, Pneumatic

• Drying Capacity: 0-20 cfm
• Dryer Technology: Refrigerated
• Minimum Output Dew Point: -20 C
• Maximum Pressure: 4 bar
• Country of Origin: Made in India
• Usage/Application: Refrigerated Air Dryer
• Dryer Horse Power: 1 HP

• Condition: New
• Use: Medical
• Use In: Air Compressor
• Application: Veterinary Purpose, Clinical Purpose
• Flow in cfm: 20
• Power Consumption: 0.36
• End Connection: 1

• Type: Refrigerated Air Dryer
• Brand Name: DOLPHIN
• Place of Origin: Vadodara
• After-sales Service Provided: yes

Manufacturing and supplying technically superior and functionally efficient range of refrigerated compressed air dryer has helped us gain acknowledgement in the industry. Our range of products is appreciated for its excellent quality and durability. We are dedicated to maximize our clients� satisfaction by offering our quality tested products. These products are known for their power saving capacity and compact designs. Our range of refrigerated air dryers meet international quality standard. These products ensure silent and reliable performance.

• Motor Power: 18.5 to 500 kW
• Air Flow Rate: 0.6 to 25 m³/min (21 CFM to 883 CFM)
• FAD: 2.09 to 86 m³/min
• Standard pressure: 5.5 to 15 bar (g)

The SECOTEC® System In developing the SECOTEC dryer range, KAESER’s goal was to produce a system that consumed minimal energy and which would provide optimal reliability and userfriendliness. The resulting SECOTEC system from KAESER KOMPRESSOREN fulfils all of these requirements and, in contrast to most refrigeration drying systems, uses a highly efficient cycling system: SECOTEC Control. Therefore, the dryer’s refrigeration circuit consumes power only when necessary.

Solar Air heating systems can provide pre-heated air for various processes. This can reduce consumption of diesel and gas which is traditionally used for heating of air.

We are counted among well-reckoned Manufacturers and Supplier of Desiccant Dryer. Desiccant Dryer, offered by us, is fabricated with great perfection using top grade components. Desiccant Dryer is known for its high performance and low maintenance. Moreover, the Desiccant Dryer is tested stringently on various quality parameters. Silent Features : Constant Atmospheric Dew Point of (�)40oC Minimum loss of purged airLong life desiccant which gives desired dew pointEasy to Operate or Troubleshoot Designed as per ASME Sec VIII Div 1 Low Maintenance costLow Power Consumption The wet air with inlet temperature of 40oC enters the pre Filter. Pre-Filter is necessary prior to the dryer, as it removes oil and other contaminants. This actually protects the Desiccant from deteriorating, thus increasing the life of desiccant. The pre-filtered air then enters the adsorption tower through a 3-way diaphragm control valve. As the air flows through the tower the moisture is adsorbed from the wet air. This dry air then passes through the After-Filter, which removes any desiccant dust carry over. Meanwhile the other Adsorber tower is undergoing regeneration, with a part of dry air coming out of the tower under adsorption. This air is then purged out through muffler. The atmospheric dew point achieved is around (-) 40oC. How does it work? Rust and pipe scale deposits in steel pipes, increased resistance to flow, malfunctioning of pressure control equipment, corrosion in electromagnetic valves, solidification of media in pneumatic conveying systems, bubbling or orange peel effect in paint spraying are all consequences of water in the compressed air system. It not only endangers your delivery dates but quickly soaks up profits. Air drawn into the compressor will, depending upon the relative humidity, contain 60% to 80% of water vapour. Under compression, some of this converts to water and can be removed by line filters. However, as the temperature drops, water vapour will re-appear as condensation. Water vapour can only be economically removed by two methods : one is by cooling the air; the other more efficient method is by adsorption. The Puriflair range comprises of both Refrigeration Dryers and adsorption dryers. Refrigeration Dryers are used for application requiring air with pressure dewpoints to +2oC. Adsorption dryers provide a much lower pressure dewpoint, from -20oC to -40oC, at a relative compressed air humidity of only 0.1%. These are available as Heatless, Heat regenerated (Reduced Purge Air), Heatregenerated and Energyless;

• Phase: Three Phase
• Max Temperature: 90 DegreeC
• Flow Rate: 0.04 to 3.97 m Cube /min
• Pressure: 45 Bar
• Automation Grade: Semi-Automatic

A peristaltic pump delivers liquid from the sample container to the 2 fluids nozzle mounted on the drying chamber, compressed air from the inbuilt compressor is also supplied to the nozzle, resulting in atomization of the liquid into a fine spray. Air from the blower is heated by an electrical air heater and blown through the drying chamber. Due to the large surface area, drying is very rapid, resulting in a sharp drop in tempetare.the dry powder particles are separated from the airing the cyclone separator and collected in the glass collection bottle. The exhaust air is directed through a flexible SS hose into the atmosphere. A bag filter can be provided for secondary powder collection.     

• Automation Grade: Automatic
• Application: Eliminate Moisture Present In The Air Stream
• Voltage: 220V
• Capacity: 3 m3/min
• Drying Capacity: 20 CFM
• Dryer Technology: In-Line
• Dryer Type: Compressed
• Dryer Horse Power: 5 HP
• Minimum Output Dew Point: -30 C

Theory Of Operation In HOC type dryer, hot air at 120 degree celsius to 140 degree celsius from Compressor discharge is directly used for the desiccant regeneration. Running cost of this dryer is virtually NIL. It has two drying towers filled with the Activated alumina or molecular sieve desiccant and they alternate in process every 4-hour automatically. Compressed air directly from air compressor discharge is taken to air dryer inlet through pipelines at 130 degree celsius (Min) temperature. This hot air is passed one drying vessel where saturated desiccant is regenerated by this high temperature air. After picking up moisture from bed, this air is cooled in an intermediate cooler. Here moisture is condensed and removed by an auto drain trap. At 40 degree celsius temperature this air passes through second drying vessel where moisture gets adsorbed and dry air comes out. Cycle time is 4-hours regeneration and 4-hours drying. After 4-hours changeover of vessels takes place. In the regeneration cycle heating of the bed is only for 2-hours and thereafter the bed is cooled by dry air. Dry air is cooled to 40 degree celsius temperature before going out of the air dryer. Due to NIL operating cost, this design is becoming more popular. To utilize full heat energy of compressor discharge, HOC type dryer should be located very close to compressor discharge. These dryers are recommended only for Dew-Point (-) 40 degree celsius and the capacities above 300 Nm3 /hr. In smaller capacity the hot air discharge does not reach 140 degree celsius and hence this design can't be used. Salient Features 1. No loss of compressed air in purge. It is a no purge loss design. 2. Maintenance is easy and simple as there are no heaters and no other moving parts except 4- way valves. 3. Fully automatic, continuous operation without any attention of operator. 4. Negligible operating cost. It neither requires electric power for regeneration nor there do any purge loss of     compressed air.

The heatless dryer consists of 2 towers which, alternately cycle on drying and regeneration. Each tower is filled with a bed of adsorbent desiccant. The tower on drying cycle adsorbs the moisture from the incoming wet air. The tower on regeneration uses a small portion of the dried air passing through the desiccant to remove the adsorbed moisture. This air is later vented to the atmosphere. The cycle is maintained using a control panel.

• Voltage: 440V
• Body Material: Stainless Steel
• Frequency: 50Hz / 60Hz
• Phase: 3 Phase
• Power Source: Electric
• Usage: Industrial

• Warranty: 6 months
• Frequency: 50 Hz
• Phase: Three
• Automation Grade: Automatic
• Features: The refrigerant dryer range is equipped with a simple timer operated condensate drain discharge,Highest quality brand in industry, reliable and efficient.
• Drying Capacity: 0-20 cfm
• Dryer Horse Power: 1 HP
• Minimum Output Dew Point: -20 C
• Maximum Pressure: 7 bar

• Certification: CE Certified
• Weight: 100-150kg, 150-200kg, 50-100kg
• Color: Brown, Grey, Light White, Shiny Silver, Silver, White
• Voltage: 110V, 220V, 380V, 440V
• Condition: New, Used
• Power: 1-3kw, 3-6kw, 6-9kw, 9-12kw
• Warranty: 1yrs, 2yrs, 5yrs
• Application: Vapor Removing
• Automatic Grade: Automatic, Fully Automatic, Manual, Semi Automatic
• Driven Type: Electric

• Packaging Type: Box
• Dryer Technology: Refrigerated
• Brand: Atlas Copco
• Model Number: FD-185
• Cycling/Non-Cycling: Cycling
• Refrigerant Type: R410a
• Tested Flow: 360 scfmb
• Outlet Pressure Dewpoint: 39 Degree F
• Pressure Drop: 3.20 psi(d)
• Total Dryer Input Power: 2.30 KW
• Specific Package Power: 0.64 kW/100 scfm

• Material: SS
• Automatic: Automatic
• Country of Origin: Made in India
• Automation Grade: Automatic
• Air Flow Rate: 40 to 5400 scfm
• I Deal In: New Only

• Brand Name: Atlas Copco
• Phase: 1Phase
• Voltage: 230V
• Usage/Application: Industrial
• Dryer Technology: Refrigerated
• Maximum Pressure: 7 bar
• Frequency: 50Hz
• Model No.: F60
• Operating Pressure: 100psi
• Operating Temperature: 35 Degree Celsius
• Room Temperature: 25 Degree Celsius
• Working Pressure: 16bar
• Air Treatment Capacity: 216m3/Hour
• Nominal Electrical Power: 662W

• Air Dryer: Filter
• Heatless Dryer: Bag Filter

we offer Air Dryer. is the first joint venture company in India to Design, Engineer, Manufacture , Market & Service high efficiency purification equipment meeting demanding international quality standards Ever since its inception at Bangalore in 1986, the company has been seeking out new state-of-the-art filtration & drying technology to broaden its customer base by offering a wide range of products to meet customer demand of various application.  Compressed Air Filters  Process Filters  NG Filters  CNG Filters  Refrigerated Air Dryers  Desiccant Air Dryers

We are highly delighted to introduce, our self as a Professionally managed manufacturer and supplier of a wide range of air dryer in India.

Hot Air Dryer, Hydrogen Gas Generator, Industrial Gas Generators

Desiccant Dryers, Dehumidifiers, Desiccant Rotors

electronic drain valves, High Pressure Receiver