Compressed Air Dryer Dealers in Makarpura, Vadodara

• Special controls for Constant Evaporating and Condensing temperature.: Low Energy Consumption

Refrigerated Dryers works on Heat Transfer principle. Saturated compressed air enters the Pre-cooler Re-heater (air to air heat-exchanger), where it is pre-cooled by exchanging heat with the outgoing cold air, which reduces heat load to evaporator. The inlet air is further cooled in the evaporator (air to refrigerant heat exchanger) to the required dew point. The cold air is then reheated when it passes back through the air-to-air heat exchanger (precoolerreheater). A refrigerant compressor and condenser supply low-temperature refrigerant to the evaporator. The thermostatic expansion valve and the hot gas bypass valve match the operation of the refrigerant system to the compressed air cooling load. In the evaporator, heat is transferred from the compressed air into the refrigerant.

the manufacturers of complete range to heatless compressed air dryer system for moisture removal in air, these compressed air dryers are designed for transformer drying application. These air dryes are specially designed to suit the transformer drying application with additional refrigeration air dryer, auto drain valve, carbon filter and after filter.Trough our research and development we are able to design the air dryer for the atmospheric condition of India where the average ambient temperature is quite high throughout the year. The dryer is designed keeping in mind the criticality and sensitivity of the transformers to the moisture.

• Type: Refrigerated Air Dryer
• Brand Name: DOLPHIN
• Place of Origin: Vadodara
• After-sales Service Provided: yes

Manufacturing and supplying technically superior and functionally efficient range of refrigerated compressed air dryer has helped us gain acknowledgement in the industry. Our range of products is appreciated for its excellent quality and durability. We are dedicated to maximize our clients̢۪ satisfaction by offering our quality tested products. These products are known for their power saving capacity and compact designs. Our range of refrigerated air dryers meet international quality standard. These products ensure silent and reliable performance.

The heatless dryer consists of 2 towers which, alternately cycle on drying and regeneration. Each tower is filled with a bed of adsorbent desiccant. The tower on drying cycle adsorbs the moisture from the incoming wet air. The tower on regeneration uses a small portion of the dried air passing through the desiccant to remove the adsorbed moisture. This air is later vented to the atmosphere. The cycle is maintained using a control panel.

We are counted among well-reckoned Manufacturers and Supplier of Desiccant Dryer. Desiccant Dryer, offered by us, is fabricated with great perfection using top grade components. Desiccant Dryer is known for its high performance and low maintenance. Moreover, the Desiccant Dryer is tested stringently on various quality parameters. Silent Features : Constant Atmospheric Dew Point of (–)40oC Minimum loss of purged airLong life desiccant which gives desired dew pointEasy to Operate or Troubleshoot Designed as per ASME Sec VIII Div 1 Low Maintenance costLow Power Consumption The wet air with inlet temperature of 40oC enters the pre Filter. Pre-Filter is necessary prior to the dryer, as it removes oil and other contaminants. This actually protects the Desiccant from deteriorating, thus increasing the life of desiccant. The pre-filtered air then enters the adsorption tower through a 3-way diaphragm control valve. As the air flows through the tower the moisture is adsorbed from the wet air. This dry air then passes through the After-Filter, which removes any desiccant dust carry over. Meanwhile the other Adsorber tower is undergoing regeneration, with a part of dry air coming out of the tower under adsorption. This air is then purged out through muffler. The atmospheric dew point achieved is around (-) 40oC. How does it work? Rust and pipe scale deposits in steel pipes, increased resistance to flow, malfunctioning of pressure control equipment, corrosion in electromagnetic valves, solidification of media in pneumatic conveying systems, bubbling or orange peel effect in paint spraying are all consequences of water in the compressed air system. It not only endangers your delivery dates but quickly soaks up profits. Air drawn into the compressor will, depending upon the relative humidity, contain 60% to 80% of water vapour. Under compression, some of this converts to water and can be removed by line filters. However, as the temperature drops, water vapour will re-appear as condensation. Water vapour can only be economically removed by two methods : one is by cooling the air; the other more efficient method is by adsorption. The Puriflair range comprises of both Refrigeration Dryers and adsorption dryers. Refrigeration Dryers are used for application requiring air with pressure dewpoints to +2oC. Adsorption dryers provide a much lower pressure dewpoint, from -20oC to -40oC, at a relative compressed air humidity of only 0.1%. These are available as Heatless, Heat regenerated (Reduced Purge Air), Heatregenerated and Energyless;

Desiccant Dryers, Dehumidifiers, Desiccant Rotors

electronic drain valves, High Pressure Receiver