Compressed Air Dryer Dealers in Vadodara

• Non-Cyclic Operation: Load handling Capacity 0 to 100% without Freezing

Refrigerated Dryers works on Heat Transfer principle. Saturated compressed air enters the Pre-cooler Re-heater (air to air heat-exchanger), where it is pre-cooled by exchanging heat with the outgoing cold air, which reduces heat load to evaporator. The inlet air is further cooled in the evaporator (air to refrigerant heat exchanger) to the required dew point. The cold air is then reheated when it passes back through the air-to-air heat exchanger (precoolerreheater). A refrigerant compressor and condenser supply low-temperature refrigerant to the evaporator. The thermostatic expansion valve and the hot gas bypass valve match the operation of the refrigerant system to the compressed air cooling load. In the evaporator, heat is transferred from the compressed air into the refrigerant.The process cools the air, reducing its capacity to hold water vapor and resulting in moisture condensation. The excess vapor condenses and is removed from the air system by a separator and automatic drain valve. Our consistency in continuous improvement in design for renovating small model results into tube-in-tube type dryer. The copper tube-in-tube design provides maximum surface area which results in optimum heat transfer

the manufacturers of complete range to heatless compressed air dryer system for moisture removal in air, these compressed air dryers are designed for transformer drying application. These air dryes are specially designed to suit the transformer drying application with additional refrigeration air dryer, auto drain valve, carbon filter and after filter.Trough our research and development we are able to design the air dryer for the atmospheric condition of India where the average ambient temperature is quite high throughout the year. The dryer is designed keeping in mind the criticality and sensitivity of the transformers to the moisture.

We provide Compressed Air Dryers made by our Principals – Puriflair India Pvt. Ltd. The dryers are Desiccant or Refrigerated type depending on desired moisture content of the compressed air. We offer different desiccant dryers ranging from simple heat less to heated type (heat of compression, blower or no loss type) dryers. We are considered to be one of the foremost Air Dryers Suppliers in India. Besides these, we also provide various accessories like after coolers, compressed air filters, receivers or storage vessels and drain valves. Variety : Refrigerated Type DryersDesiccant Type Dryers Features : The flow rates start from 5 m3/hr and can be manufactured up to any size.Standard pressure is 7 kg/cm2 but low as well as high pressures dryers can also be supplied. High pressure dryers are used for PET bottling application.In the refrigerated type dryers, the incoming air is cooled to 2 to 3 degree C, thus removing any moisture present in the air. By using suitable heat exchangers, the temp of air at outlet is closer to ambient temperatures. Applications : Desiccant Dryers : Used when moisture in compressed air is required to be very low. There are mainly of two types - The Heatless and the Heated type.Heatless Dryers : Used generally for low flow rates.Heated Dryers : Used for higher flow rates.

• Drying Capacity: 0-20 cfm
• Dryer Technology: Refrigerated
• Minimum Output Dew Point: -20 C
• Maximum Pressure: 4 bar
• Country of Origin: Made in India
• Usage/Application: Refrigerated Air Dryer
• Dryer Horse Power: 1 HP

We offer Heatless Type Air Dryer. Operating Principal: In Heatless Dryers, two vessel filled with desiccant are provided which cycle automatically, producing dry air continuously. In these units, wet air enters the bottom of one Vessel and passes upwards through the desiccant bed where the moisture is adsorbed. The dry air comes out from the top. A small portion of dry air is passed downwards through the desiccant bed in second vessel, which is under re-generation. Moisture laden purge air is then vented out to atmosphere. The purge loss is around 7.5% of the total air flow. At preset interval, the vessel changeover automatically, and Dry air is available continuously, without any surge. Easy Operation: This is simplest type of air dryer with Activated Alumina / Molecular Sieves drying agent. This is virtually maintenance free, fully automatic, and requires no attention for year heatless type dryers do not require any heating for re-generation and therefore are very simple in design and maintenance free. Low Operating Cost: • Due to its inherent simple design, investment in this type of dryer is the cheapest and the payback on this investment is very quickly. • Low Temperature operation reduces corrosion in tower and desiccant lasts longer. • Power requirement is 60 watt only for Solenoids Valves Operation. Capacity: • Air Capacity: 5 to 10000 NM3/Hr. • Dew Point : Up to (-) 60°C • Operating Pressure: 5 to 35 Kg/cm2g

• Type: Refrigerated Air Dryer
• Brand Name: DOLPHIN
• Place of Origin: Vadodara
• After-sales Service Provided: yes

Manufacturing and supplying technically superior and functionally efficient range of refrigerated compressed air dryer has helped us gain acknowledgement in the industry. Our range of products is appreciated for its excellent quality and durability. We are dedicated to maximize our clients̢۪ satisfaction by offering our quality tested products. These products are known for their power saving capacity and compact designs. Our range of refrigerated air dryers meet international quality standard. These products ensure silent and reliable performance.

Atmospheric Air is sucked by air Compressor which basically contains water vapour & dust. Besides, in lubricated type Air Compressors, oil is present in the air compression chamber, traces of which are present, in compressed air in Liquid Vapour form, which condenses into a heavy gummy oil varnish.

• Automation Grade: Automatic
• Application: Eliminate Moisture Present In The Air Stream
• Voltage: 220V
• Capacity: 3 m3/min
• Drying Capacity: 20 CFM
• Dryer Technology: In-Line
• Dryer Type: Compressed
• Dryer Horse Power: 5 HP
• Minimum Output Dew Point: -30 C

In Today’s Industrial zone this compressed air dryer is playing an important role in many applications. Capitalizing on our manufacturing unit we design, manufacture and supply superior quality compressed air dryers & gas drying systems. Our designed Air Dryers is for high-end Industrial applications to provide better protection against condensate damage. As per commercial point of view compressed air dryer are very cost effective and we also offer intelligent energy and Purge loss saving control for all drying processes. Our Range of Dryer Heatless Air Dryer Heat Reactivated Dryer Heat Reactivated Dryer   Working Principle of Heatless Air Dryer In Heatless Air Dryer two adsorber towers filled with Activated Alumina / Molecular Sieves to absorb the moisture present in the wet compressed air. Wet incoming compressed air or gas is passed through an adsorber tower where moisture is adsorbs to achieve better dew point.The dry air comes through the top of tower. After some time of operation activated alumina needs regeneration. Reactivation or regeneration of activated alumina is necessary to drive off the adsorbed moisture and to restore its absorptive capacity.This is accomplished via purging the adsorbent by dry air or gas at atmospheric pressure and temperature in reverse direction. The purge loss in around 10% of dry air. Changeover will take place through PLC/timer and continuous dry air will be received at outlet.

• Brand Name: Atlas Copco
• Phase: 1Phase
• Voltage: 230V
• Usage/Application: Industrial
• Dryer Technology: Refrigerated
• Maximum Pressure: 7 bar
• Frequency: 50Hz
• Model No.: F60
• Operating Pressure: 100psi
• Operating Temperature: 35 Degree Celsius
• Room Temperature: 25 Degree Celsius
• Working Pressure: 16bar
• Air Treatment Capacity: 216m3/Hour
• Nominal Electrical Power: 662W

The heatless dryer consists of 2 towers which, alternately cycle on drying and regeneration. Each tower is filled with a bed of adsorbent desiccant. The tower on drying cycle adsorbs the moisture from the incoming wet air. The tower on regeneration uses a small portion of the dried air passing through the desiccant to remove the adsorbed moisture. This air is later vented to the atmosphere. The cycle is maintained using a control panel.

• Warranty: 12 months
• Usage/Application: Moisture Removal
• Drying Capacity: 20cfm to 1000cfm
• Dryer Technology: Dessicant
• Brand: MARK
• Dimension: As per Design
• Maximum Pressure: 13bar

SIGMA-Dry Made from activated aluminium oxide, the desiccant has an exceptionally high adsorption capacity and its regeneration capability provides sustained low pressure dew point performance with minimal pressure loss. The desiccant is also waterproof and mechanically stable, which makes it particularly suitable for long periods of operation. Furthermore, specific pellet sizes are available to ensure optimal performance of flow diffusers and sieve plates. Air Flow Rate : 0.15 to 154.53 m³/min (5 CFM to 5457 CFM)

We are counted among well-reckoned Manufacturers and Supplier of Desiccant Dryer. Desiccant Dryer, offered by us, is fabricated with great perfection using top grade components. Desiccant Dryer is known for its high performance and low maintenance. Moreover, the Desiccant Dryer is tested stringently on various quality parameters. Silent Features : Constant Atmospheric Dew Point of (–)40oC Minimum loss of purged airLong life desiccant which gives desired dew pointEasy to Operate or Troubleshoot Designed as per ASME Sec VIII Div 1 Low Maintenance costLow Power Consumption The wet air with inlet temperature of 40oC enters the pre Filter. Pre-Filter is necessary prior to the dryer, as it removes oil and other contaminants. This actually protects the Desiccant from deteriorating, thus increasing the life of desiccant. The pre-filtered air then enters the adsorption tower through a 3-way diaphragm control valve. As the air flows through the tower the moisture is adsorbed from the wet air. This dry air then passes through the After-Filter, which removes any desiccant dust carry over. Meanwhile the other Adsorber tower is undergoing regeneration, with a part of dry air coming out of the tower under adsorption. This air is then purged out through muffler. The atmospheric dew point achieved is around (-) 40oC. How does it work? Rust and pipe scale deposits in steel pipes, increased resistance to flow, malfunctioning of pressure control equipment, corrosion in electromagnetic valves, solidification of media in pneumatic conveying systems, bubbling or orange peel effect in paint spraying are all consequences of water in the compressed air system. It not only endangers your delivery dates but quickly soaks up profits. Air drawn into the compressor will, depending upon the relative humidity, contain 60% to 80% of water vapour. Under compression, some of this converts to water and can be removed by line filters. However, as the temperature drops, water vapour will re-appear as condensation. Water vapour can only be economically removed by two methods : one is by cooling the air; the other more efficient method is by adsorption. The Puriflair range comprises of both Refrigeration Dryers and adsorption dryers. Refrigeration Dryers are used for application requiring air with pressure dewpoints to +2oC. Adsorption dryers provide a much lower pressure dewpoint, from -20oC to -40oC, at a relative compressed air humidity of only 0.1%. These are available as Heatless, Heat regenerated (Reduced Purge Air), Heatregenerated and Energyless;

• Packaging Type: Box
• Dryer Technology: Refrigerated
• Brand: Atlas Copco
• Model Number: FD-185
• Cycling/Non-Cycling: Cycling
• Refrigerant Type: R410a
• Tested Flow: 360 scfmb
• Outlet Pressure Dewpoint: 39 Degree F
• Pressure Drop: 3.20 psi(d)
• Total Dryer Input Power: 2.30 KW
• Specific Package Power: 0.64 kW/100 scfm

Desiccant Air Dryer, Refrigerated Air Dryer, Air Compressor, Air Dryer

Desiccant Dryers, Dehumidifiers, Desiccant Rotors, Silica Gel

Desiccant Dryers, Compressed Air Filters, Air Filters

Heatless Air Dryer, Hydrogen Gas Generator, Industrial Gas Generators

Compressed Air Dryers, electronic drain valves, High Pressure Receiver

Compressed Air Dryers, Heatless Dryer

Heatless Adsorption Dryer, Automotive Fluid Connector

Compressed Air Dryers, Compressed Air Filters, Drain Valves, Heat Exchangers

Compressed Air Dryer, Industrial Incinerator, gas plant