Current Transformers Dealers in Vadodara

• Frequency: 60-80 Hz
• Rated Power (VA): 15 VA
• Accuracy Class: 10

• Phase: Double Phase
• Warranty: 1 Year
• Coil Number: 2
• Std. C.T Ratio: as per requirement
• Class: 0.2 or 0.1
• System Voltage: 11kV / 33Kv

Keeping in-line with the globally accepted standards, the raw material used for production is of high-grade. Thus, we always keep a check on the final product to make sure that the same is defect free. We are capable of delivering the products in exceptional packaging material, this circumvents the loss during transit and thus, the product is delivered safely.

• Inter MM: 30 mm
• Outer MM: 80 mm
• Ratio: 30/5
• Burden: 1.5 VA

Features : Maintenance Free Compact DesignCan be mounted in any positionHigh Dielectric strength & Tracking IndexCan withstand mechanical stresses during fault conditionContinuous Thermal current - 120% Rated Primary CurrentApplication : MeteringProtectionRevenueCore BalanceIndicaiotnSummationAuxiliaryInterposingNeutral DisplacementDifferential ProtectionMeter & UPS manufacturerMotor/ Power Control Center

• Warranty: 1 Year
• Country of Origin: India
• Type: Toroidal Type
• Material: Plastic Case
• Brand Name: Shilchar
• Driven Type: Electric
• Size: Customer Specified

For Accurate Metering Application With PVC Lead Wire Or With Contact Pin for PCB Mounting Customised Design Capacity: 10000 Pieces Per Month

• Certification: CE Certified
• Rated Voltage: 220V
• Driven Type: Electric
• Warranty: 1 Year
• Mounting Type: Pole Mounted
• Rated Voltage: 33 to 330 KV

• Country of Origin: India
• Certification: ISI Certified
• Phase: Three Phase

We provide highly efficient Current Transformers that are easy to install. Our Current Transformer are widely used in control panels and other Indoor switchgear units, all type of machineries, motor starter, power transformer control circuits and outdoor switchyard application. We are regarded as one of the budding Current Transformer Manufacturers and Exporters in India. Quality Assurance Our transformers are made as per the IS and IEC Specification. They are tested at strict parameters in order to assure their high performance. Product Range Ring Type Current Transformers : A Current Transformer which has an window in the center to accommodate a primary conductor (busbar or cable) through it.LT Tape Insulated Current Transformers Range : 1-5-7.5-10-15-20-25-30-50-60-75-100/5-1 AResin Cast Current Transformers. Range : 1-5-7.5-10-15-20-25-30-50-60-75-100/5-1 A Bar -Primary Current Transformers : A Current Transformer in which the primary winding consists of bar of suitable size and it is an integral part of the CT.LT Tape Insulated Current Transformers Range : 1-5-7.5-10-15-20-25-30-50-60-75-100/5-1 AResin Cast Current Transformers. Range : 1-5-7.5-10-15-20-25-30-50-60-75-100/5-1 A Wound Type Current Transformers : A Current Transformer having a primary winding of more than one full turn wound on the core. LT Tape Insulated Current Transformers Range : 1-5-7.5-10-15-20-25-30-50-60-75-100/5-1 AResin Cast Current Transformers. Range : 1-5-7.5-10-15-20-25-30-50-60-75-100/5-1 A Interposing Current Transformers : These Current Transformers are used in conjunction with main CTs to alter the ratio of main CT or to provide isolation to meters or relays from main CTs secondary circuit. Primary current of these CTs are generally lower than 1 0 amp. Due to which they are always wound primary types.Summation Current Transformers : When current flowing, in more than one feeder is required to be metered summation current transformer are used. These Current Transformers are provided with more than one primary winding and one common secondary.Bushing Type or Busduct Current Transformers : These Current Transformers are Ring type construction & can be mounted on Busduct or Bushing turrert of power transformer.Core Balance Current Transformers : These are ring type Current Transformers & suitable for the measurement of the sum of three phase currents in a 3-ph cable. Under normal operating conditions this sum is zero. In the event of an earth-fault the sum of the current is equal to the zero sequence current.Precision Grade Current Transformers : These Current Transformers are of accuracy of 0.1, 0.2 or 0.5 and used as a standard current transformer to check accuracies of other transformer. These current transformers are either wound primary or ring type and manufactured -in. teakwood cases.Special Purpose Transformers : High Current Ring Type Current Transformers upto 20,000A, 22kV system voltage for Generator Busducts.Oil Cooled Current Transformers, Pts And Ct-Pt Combined Unit : These units can be offered as Dry Type or Oil Immersed. Oil cooled upto 33 kV are made from defect-free materials, these Current Transformer and Potential Transformers are designed for monitoring single-phase and three-phase power line voltages in power metering applications such as : Resin cast wound primary current transformersResin cast window type current transformersResin cast bus bar type current transformersOutdoor oil cooled live tank current transformersOutdoor oil cooled dead tank current transformersResin cast potential transformers single/double pole insulatedOutdoor oil cooled potential transformersOutdoor oil cooled combined ct/ pt unit.

LT Current Transformer is used for converting primary current in to small standard current values which are ideal for the devices to which it is to be connected. The Low Tension Current Transformer made available by us is accessible in robust construction and is very endurable as well. Additionally, we are one of the eminent Lt Current Distribution Transformer Exporters from India.

• Core Type: Ring Core Type CT
• Material: Copper
• CT Ratio: As Per Requirment

• CT Ratio: 100A to 5000A/5 or 1A
• Rated Power (VA): 5VA to 15VA
• Rated Voltage: 440V
• Accuracy Class: 0.2, 0.5, 1 or 3, Measuring CT upto 0.1 accuracy class
• Minimum Order Quantity: 10 Number

• System Voltage: 720V maximum
• Rated primary rating: 30A to 4000A
• Rated secondary output: 5A
• Rated burden: 1.5AV - 15VA
• Class of accuracy: 0.5
• Operating frequency: 50Hz or 60Hz
• Thermal short circuit current (Ith): 60xIn
• Dynamic short circuit current (Idyn): 2.5xIth
• Instrument security factor: FS<5
• Test voltage: 3kV 50 Hz 1 min
• Insulation class: E (120°C max)
• Case: made from ABS Plastic
• Mounting modes: DIN rail
• Applicable standard: IEC/EN 60044 -1, BS 3938

• Country of Origin: India
• Feature: Good Quality

We have gained excellence in the field of designing and manufacturing of Ring Type Oil Immersed LT Bushing CTs through experimentation and experience of two decades. They are preferred choice for Power and Distribution Transformer manufacturers of repute. Features : Cost effective optimal design. Dimensional Flexibility. State of art manufacturing practice. Impeccable quality, conforming to latest standards.  

• Color: Red, Black, Brown, Orange, Grey, White
• Material: Copper
• Driven Type: Electrical
• Packaging Type: New, Used
• Voltage: 0-110 V, 110-220 V, 220-440 V
• Condition: New, Used

Narayan has a full range of MV CTs -Indoor as well as Outdoor, outline electrical parameters are as below: Up to 36 kV system voltage application. Primary current rating up to 20,000 Amps. Secondary current rating of 1 Amps, 5 Amps, 0.577 Amps (or any relay feed current value) or custom specified. Multi core CTs up to 5 cores or more. Burden value up to 50 VA (IEC 60044, IS 2705) or more. Accuracy class up to 0.1 for metering (IEC 60044, IS 2705), up to 10P, 15P for relaying/protection (IEC 60044, IS 2705), 0.1 for metering (ANSI C 57.13) and up to C 800 for relaying (ANSI C 57.13). Special accuracy class like class PS (IS 2705)/PX (IEC 60044) with specific values of Vk and Imag., PR Class, TPS, TPX, TPY and TPZ

we are adding instruments transformers, both current & voltage Transformers to our range of product. Group of Current Transformers designed & constructed in compliance with below standards: Transformers have been successfully tested in ERDA, Vadodara for type test as per IEC: 61869-2. ‘elmex’ has set up all the test facilities in- house to conduct all routine tests as well as certain type test.

• CURRENT TRANSFORMER : VOLTAGE

We are offering current transformer, voltage transformer. 1) LOW -TENSION CURRENT TRANSFORMERS UP TO1.1 kV SYSTEM VOLTAGE:-- � We manufacture LT current transformer, which is Known for its Effective functioning among our valued Clients And is extensively used for Industrial And Commercial supply. The standard value of the secondary Current is placed at 1A or 5A. LT CT, PT tape wound, resin cast- transformers, which are encountering Wide demand in the market. We manufacture Tape wound types CTS, AuTo transformers and Epoxy moulded transformers, miniature CTS Our specialized products are LT and HT current transformers Current and Voltage Transformer from LV i.e 0.415kv to MV up to 33 kv for Metering , Protection and special purpose are Manufacturing by us. They are either tape Wound , Resin cast or Oil cooled. They are Compact and custom build for the given specification. We offer single phase CTS or three phase CTS (for LT CTS). These products are manual fractured with high Grade . Low loss magnetic material and copper wound under controlled climate. The designs are computerized and Products are Manufactured by skilled workmen These designs comply with requirements of relevant BIS/IEC and have been successfully type tested at Govt. approved laboratories like ERDA. We also provide necessary assistance to our valued customer in import substitutions and also in finalizing overall dimensions, mountain dimensions or specification in case of class PS CTS , core balance CTS etc

• Brand Name: Trinity
• Frequency: 50 Hz
• CT Ratio: 50/5A to 1200/5A
• Rated Voltage: 0.66/3 kV
• Accuracy Class: 1 to 5
• Rated Burden: 3 to 15 VA
• Inner Diameter: Min 30 to 115 mm
• Outer Diameter: Max 80 to 145 mm
• Instrument Safety Factor: Less than 5

• Material: Mild Steel
• Phase: Three Phase
• Frequency: 50-60 Hz
• Rated Power (VA): 10VA
• Accuracy Class: 0.5
• Ratio: 1000/5A
• Type: MSQ-60

• Phase: Three Phase
• Mounting Type: Floor Mounted
• Frequency: 60 Hz
• Weight: 50 kg
• Power: 63 kVA
• Output Voltage: 400 V
• Winding Material: Copper
• Transformer Type: Medium Voltage Current Transformer
• Accuracy Class: 0.2
• Usage/Application: Medium Or High Voltage applications
• Operating Temperature: -10 To 50 Degree Celsius
• Dimensions: 240 x 148 x 200 mm

• HERMATICALLY SEALED: CLASS A OIL IMPREGNATED PAPER INSULATION FOR UNIFORM STRESS
• CLASS 0.5 OR 0.2 FOR METERING AND ALL STANDARD FOR PROTECTION: RATIO CHANGING

We supply ht current transformers, essentially, used as part of the protection system. voltage level : upto 220 kv. burden level : as per requirement type : as per requirement type test : will be provided certificates testing agency: erda (electrical research and development agency) who are internationally-recognised independent laboratory. cpri (central power research institute) of govt of india.

• Material: Copper
• Rated Power: 1 VA
• Rated Voltage: 440 V
• Phase: Single Phase
• CT Ratio: 1:2500
• Brand Name: Cleem
• Part Number: CETF31001
• Output Voltage: 10 V

• Upto 36KV system Voltage: Indoor
• Resin Cast: Outdoor

We offer current transformers resin cast, oil cooled, dry type, tape insulated; indoor & outdoor ct up to 36kv system voltage as per customers requirement.

One of the suppliers of industrial products, providing various types of products such as current transformer.

low voltage current transformers, CONTROL TRANSFORMERS, Toroidal Transformers

Insulated Current Transformer, ups transformer, High Frequency Transformer

Low Tension Current Transformer, Electrical Motors, Water Pumps

We are offering low voltage current transformer from india.

auxiliary current transformers, low tension meter, Current Transformer

Current Transformers, Rapeseed Meal, Potential Transformers, Moong Daal