Digital Meters Dealers in Vadodara

• Display Type: Digital
• Power Source: Electric
• Feature: Light Weight, Lorawan Compatible, Low Power Comsumption
• Warranty: 1Year
• Brand Name: Kusam Meco
• Accuracy: 1.6%
• Operation: Easy to use

To Check voltage out from power Supply To Check Ampere drawn by machine To Check Resistance of Coils To check Capacitance A Very Useful tool for your tattoo kit.

• Size: Multisizes
• Output: 4-20mA/HART/Relay/Batching/GSM/Data Logging
• Cable length: Up to 50 m / 164 ft
• Size :: 1” to 10”
• Accuracy :: ±2.5% to 3% of actual reading
• Gas Temperature :: Up to 70°C
• Power Supply :: 85 to 265 VAC @ 50Hz

DescriptionAllegiance Digital  Electromagnetic Water  Flow Meter, 80 mm (3 Inch) simply known as mag flow meter is a volumetric flow meter which is ideally used for waste water applications and other applications that experience low pressure drop and with appropriate liquid conductivity required.The device doesn’t have any moving parts and cannot work with hydrocarbons and distilled water. Mag flow meters are also easy to maintain.Magnetic flow meters works based on Faraday’s Law of Electromagnetic Induction. According to this principle, when a conductive medium passes through a magnetic field B, a voltage E is generated which is proportional to the velocity v of the medium, the density of the magnetic field and the length of the conductor.In a magnetic flow meter, a current is applied to wire coils mounted within or outside the meter body to generate a magnetic field. The liquid flowing through the pipe acts as the conductor and this induces a voltage which is proportional to the average flow velocity.This voltage is detected by sensing electrodes mounted in the Magflow meter body and sent to a transmitter which calculates the volumetric flow rate based on the pipe dimensions.Mathematically, we can state Faraday’s law asE is proportional to V x B x L[E is the voltage generated in a conductor, V is the velocity of the conductor, B is the magnetic field strength and L is the length of the conductor].It is very important that the liquid flow that is to be measured using the magnetic flow meter must be electrically conductive. The Faraday’s Law indicates that the signal voltage (E) is dependent on the average liquid velocity (V), the length of the conductor (D) and the magnetic field strength (B). The magnetic field will thus be established in the cross-section of the tube.Basically when the conductive liquid flows through the magnetic field, voltage is induced. To measure this generated voltage (which is proportional to the velocity of the flowing liquid), two stainless steel electrodes are used which are mounted opposite each other.The two electrodes which are placed inside the flow meter are then connected to an advanced electronic circuit that has the ability to process the signal. The processed signal is fed into the microprocessor that calculates the volumetric flow of the liquidPrinciple of Magnetic Flow Meter Based on Faraday’s LawAllegiance Water Management Electromagnetic Flow Meter Clamp On Ultrasonic Flow Meter S.S Electromagnetic Flow Meter Open Chenal Ultrasonic Flow Meter Vortex Flow Meter Instrumentation Tools Turbine Flow Meter by Membrane Key Digital water Flowmeter Telemetry Digital water Flowmeter Non Telemetry Digital water Flowmeter as per CGWA   Digital water Flowmeter

• Brand Name: Metrix
• Color: Yellow
• Model Number: Digital Capacitance Meter, DCM 1501
• Digital Capacitance Meter, DCM 1501: 1300

A capacitance meter is a piece of electronic test equipment used to measure capacitance, mainly of discrete capacitors. Depending on the sophistication of the meter, it may display the capacitance only, or it may also measure a number of other parameters such as leakage, equivalent series resistance (esr), and inductance. For most purposes and in most cases the capacitor must be disconnected from circuit; esr can usually be measured in circuit.

 Order -NABL accreditated certificate traceable to National Standards." Features Voltage measurement - 1000V AC/DC, Current With Resistance & Capacitance measurement functions Data hold, Continuty & Diode test with beeper functions

• Brand Name: Optima
• Usage/Application: Measurement
• Type Of Ph Meter: Portable
• Accuracy: Greater than +/- 0.01 pH
• Range: 00.00-14.00 pH
• TDS: 0-1999 mg/l
• DO Meter: 0.00-25.00 mg/L

• Brand Name: AGRO MOISTURE METER
• Accuracy: 0.2 %
• Testing Range: 0 % to 40 % .
• Country of Origin: Vadodara
• Model Number: AGRO - 1 TO AGRO - 8
• Name: Digital Moisture Meter - Agro Seeds

We manufacture & supply Digital Moisture Meters for all types of GRAINS , PULSES & DALS, OIL SEEDS, DRY FRUITS , SPICES , FLOURS & POWDERS. For full Technical Information of our product please visit us at www.nationalcontrols.in

• Brand Name: Rishabh
• Features: Diode measurement and continuity testing, Hold measurement , Relative measurement, Temperature measurement with K type Thermocouple, Peak value measurement
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Item Code: RISHABH-DMM-616
• Digit Display: 4 Digit
• Auto Power Off: Yes
• Low Battery Indication: Yes

• Application: Indsustrial Usage

• Product: POWER PRO

the power pro from trinity is an easy-to-use, cost effective electrical power meter that offers all the basic measurement capabilities required to monitor an electrical installation. in addition to measuring the instantaneous parameters, it also measures accurately all three energies, and also demand, thus helping to measure and control energy costs. over the basic metering, it optionally provides two relay outputs, rs485 port supporting modbus rtu protocol, dual source metering and thd measurements.

• Display: Digital
• Brand Name: Flowtech
• Material: SS
• Accuracy: 0.25%
• Item Code: EMFMBO-099
• Application Media: Water
• Model: EMFMBO-099
• Application: Industrial
• Fluid Temp: 150 Deg C
• Temperature: up to 150 Deg C

• Flowmeter: Electromag

“kabir” make versatile electromagnetic flow meter is ideal for conductive liquids such as raw water, chilled water, effluents, potable water etc. Using time proven electromagnetic flow metering principle, the meter achieves a flow meter for pipes from 15mm to 600mm. Since there are no moving parts, the flow meter gives years of maintenance free service. “kabir” flow-head can be supplied in teflon lining or hard rubber lining is available with all the features required in a field mounted water metering equipments. These include - weather proof enclosure, communication options, rtc with data logging with printer option and 4 to 20 ma isolated flow signal transmission option for flow pattern recording. The converter is available as field mounted-ip65 protection category. Gsm modem interface can also be supplied as an optional add-on feature. the operating principle of magnetic flow meters is based upon faraday's law of electromagnetic induction, “it state that a voltage will be induced in a conductor moving through a magnetic field”. The magnitude of the induced voltage e is directly proportional to the velocity of the conductor width d, and the strength of the magnetic field b. Liquid acts as a conductor as it flows through pipes. This flowmeters find varied applications where the flowing medium is difficult to handle. Major advantage of these flow meters are : zero pressure drop, no moving part and highest accuracy level at most affordable cost.

National Digital Moisture Meter is the most reliable, compact, light weighted, rugged & sophisticated instruments available in the market to provide you long hours of services & trouble free operation. The instrument is an easy single step tester that needs no temperature compensation, calculation or charts. The reading starts settle down in about 40 seconds of sample pouring and the inside electronics automatically compensates for the temperature. National Digital Moisture Meter is an impedance type instruments. This measurement principle is established to be more reliable and less subjected to errors resulting from unevenly distributed moisture within or among sample Mustiness or sourness of sample, etc. A great deal of efforts has gone into the development to provide you with years of service and reliability. The body is made of engineered plastic material and can withstand some abuse. There are no scales, meter with needle, infect no movable parts that need replacements. The unit is built around the latest state of the art integrated circuits to provide you with long, trouble free, hours of services.

• MOISTURE TEST RANGE: 2% TO 40%
• RESOLUTION: 0.1%

 0.5% DATA HOLD FUNCTION LOW BATTERY INDICATION DATA HOLD FUNCTION BATTERY CONSUMPTION APPROX. 6.5mA LOW POWER CONSUMPTION IT IS USED THE MICROCOMPUTER (CPU) TECHNIQUE TO MEASURE QUICKLY, ACCURATELY STANDARD 9V BATTERY

National Digital Moisture Meter is the most reliable, compact, light weighted, rugged & sophisticated instruments available in the market to provide you long hours of services & trouble free operation. The instrument is an easy single step tester that needs no temperature compensation, calculation or charts. The reading starts settle down in about 40 seconds of sample pouring and the inside electronics automatically compensates for temperature. National Digital Moisture Meter is an impedance type instruments. The measurement principle is established to be more reliable and less subjected to errors resulting from unevenly distributed moisture within or among the sample mustiness or sourness of sample. The molded body is made of engineering plastic material and can withstand some abuse. There are no scales, meter with needle, infect no moving part that need replacements. The unit is built around the latest state of art integrated circuits to provide you with long, trouble free, hours of services.  

• Display Type: 7 segment LED model
• Frequency: MF216
• Features: Dimensional accuracy,Corrosion resistance,Application specific design,Excellent performance
• Applications: Control Panel,Motor Control Centers,Distribution Panels,Genset Panels,Plant Monitoring,Control Syste
• Brand: sub zero
• Model Name/Number: M14
• Resolution: 0.01 Resolution
• Screen Digit: 4 digit

We manufacturer and Supply digital frequency meter in a reasonable prices.

• Color: Black 
• Weight: 0.4kg
• Brand Name: Multitek
• Item Code: M300-XXX
• Usage/Application: Laboratory
• Material: Polycarbonate
• Supply Voltage: 115 or 230 Volts
• Overrange indication: 1 Second
• Resolution: 0.05%

Features: - 3½ Digital Multimeter - Large LCD Display with Manual Range - No Power-OFF under natural operation - Full protection in All Ranges.     

• Weight: 900 gms
• Display Type: Digital
• Usage/Application: Industrial
• Model Name/Number: Meco DBM72
• Brand: Meco
• Dimension: 205x115x70mm
• Cable Length: 300mm (approx.)
• Battery Load Test Current: 80A
• Battery Capacity: 40 Ah
• Battery Voltage: 6V / 12V DC
• Battery Type: Lead Acid & Li-ion Battery

• Brand Name: Metravi
• Accuracy: 1.5 dB
• Model No: SL 4005
• Display: Digital
• Calibration: Automatic
• Resolution: 0.1 dB
• Measurement Range: 30-130 dB

Our Digital Multifunction Meter is one of the most widely used products. These are used in various industrial and household applications and gives best and accurate results. Same is the case with our Electronics Multifunction Meter which is made of high quality raw materials and is highly durable and trustworthy in giving readings. We have with our dedication become the most well known Multifunction Electricity Meter, Supplier in India. Features : High durabilityAbrasion resistant Easy installation Click Here To View More detail

• Color: Black
• Display Type: Digital
• Shape: Square
• Material: Plastic
• Mounting Type: Panel Mounting
• Time Setting Range: 0-9999.59 hour/min                      

• Display: Digital
• Application: Industrial
• Working Frequency: 60Hz
• Power Supply: 4 x 1.5 V AAA (UM-4)Battery
• Dimensions: 140 x 72 x 34 mm

We are offering VAF Meter to our client. Displays Line to Line Voltage - average and phase wise, Amps - average and phase wise & Frequency.

• Display Type: LED
• Color: WHITE/BLUE
• Brand: Rishabh
• Material: PVC
• Model: Optima VAF
• Usage/Application: Industrial
• Size: 96X96
• Power Source: 230VAC

The VAF model meters from Trinity are True RMS type digital meters for use in three phase four wire LT electrical systems. The design of these meters is based on proven micro-controller technology, resulting in compact and accurate meters. The design uses powerful micro-controller based technology. The meter uses state of the art Digital Signal Processing (DSP) circuitry to achieve very high accuracy measurement of True RMS value of all parameters. The meter displays the readings on Crisp Super bright LED Displays.

• Feature: Automatic terminal blocking system,Protective holster for rough duty,Supplied with accredited test certificates
• Warranty: 3 year
• Display Type: Digital
• Body Material: ABS
• Color: Red and Black
• Digit Display: 4 Digit