Dryers Dealers in Makarpura, Vadodara

We manufacture and supply a wide range of Refrigerated Dryers, Desiccant dryers, Water/Air Chilling Plants and other Compressed air Accessories which are used by various industries. Our product range encompasses Refrigerated Dryers works on Heat Transfer principle. Saturated compressed air enters the Pre-cooler / Re-heater (air to air heat-exchanger), where it is pre-cooled by exchanging heat with the outgoing cold air, which reduces heat load to evaporator. The inlet air is further cooled in the evaporator (air to refrigerant heat exchanger) to the required dew point. The cold air is then reheated when it passes back through the air-to-air heat exchanger (precooler/reheater). A refrigerant compressor and condenser supply low-temperature refrigerant to the evaporator. The thermostatic expansion valve and the hot gas bypass valve match the operation of the refrigerant system to the compressed air cooling load. In the evaporator, heat is transferred from the compressed air into the refrigerant.The process cools the air, reducing its capacity to hold water vapor and resulting in moisture condensation. The excess vapor condenses and is removed from the air system by a separator and automatic drain valve. Our consistency in continuous improvement in design for renovating small model results into tube-in-tube type dryer. The copper tube-in-tube design provides maximum surface area which results in optimum heat transfer   Features & Advantages Non-Cyclic Operation Load handling Capacity 0 to 100% without Freezing Constant Dew point Customized Air/Water models Special controls for Constant Evaporating and Condensing temperature. Low Energy Consumption Eco Friendly

Owing to our well-maintained and organized inventory system, we deliver the same in the committed time. Customers can provide their specifications to us in regards to the packaging of the products as we serve customized packaging requirements. We ensure damage-free products at customer's end.Description for working : A Heatless compressed air dryer is the desiccant air dryer for achieving a dew point of -70oC or better. Process - Incoming compressed air is dried with refrigeration dryer then it passes through carbon filter, pre filter passes through the slide piston valve assembly and is directed towards absorber chamber I where the compressed air passes through the high quality of desiccant. Compressed air drying takes place by absorption. Dry compressed air from absorber chamber I is then passes though the check valve assembly and then through the after filter to the transformer. While compressed air is being drying in chamber I the desiccant in chamber II where the desiccant has been wetted in the previous cycle is being simultaneously regenerated. The chamber II is depressurized to the atmosphere through the purge valve in the downward direction. A portion of the dry compressed air passes thrugh the needle valve / orifice plate through the desiccant and flushes out the desorbed moisture. When the regeneration is complete, the purge valve is closed and the tower is slowly depressurized to line pressure for a smooth changeover. Efficient dew point of - 70oC or better can be achieved through effective drying system comprising of refrigeration dryer and Heatless Air Dryer. For Continuous measurement of the quality of the air online digital dew point meter can be provided on request.

Features :- Innovative counter flow drying technology Uniform drying Adjustable drying period Adjustable chamber temperature up to 100˚C Easy to install & maintain Acquires lesser floor area

• Type: Refrigerated Air Dryer
• Brand Name: DOLPHIN
• Place of Origin: Vadodara
• After-sales Service Provided: yes

Manufacturing and supplying technically superior and functionally efficient range of refrigerated compressed air dryer has helped us gain acknowledgement in the industry. Our range of products is appreciated for its excellent quality and durability. We are dedicated to maximize our clients� satisfaction by offering our quality tested products. These products are known for their power saving capacity and compact designs. Our range of refrigerated air dryers meet international quality standard. These products ensure silent and reliable performance.

We offer to the customers Y Type Strainer that is manufactured using high grade raw materials like stainless steel, alloys, etc. Our Y Type Strainer is widely appreciated and demanded in the market owing to its high durability and superior performance. Also, our specialized team of experts duly checks the Y Type Strainer before delivering it to the customers. Features Anti-corrosiveEasy to installLow maintenanceHigh strength Used in Industries Like ChemicalPetrochemicalWater PurifyingPulp and paperMarine Details Size : 3/8" to 2" BSP / BSPTFiltration : 100 MeshMaterial : C.I. or Brass

• Type: Continous Rotary or Rotary Vaccum Paddle Dryers
• Brand Name: SOLAR
• Warranty: STANDARD 12 -18 MONTHS
• Application: FOR MOISTURE REDUCTION OR DRYING
• Place of Origin: INDIA
• Capacity: 10 KG/HR - 10 TONS / HR OR HIGHER
• After-sales Service Provided: YES

Rotary driers for all applications includes food, agriculture, chemicals, etc. the driers are designed to suit the applications which may also include untouched process for food stuff such as for drying of leaves, chemicals such as potassium nitrate & several other products. the dryer can be single pass or multi-pass to suit limitations of space. the same is supplied with hot air generators or direct firing with ldo diesel or lpg etc

Fluid Bed Dryer offers a lucid solution to drying of wet granules. It utilizes the principle of passing the hot air at a high velocity through the bed of the material to be dried, causing it to float on a cushion of air. The process air is supplied to the bed through a special perforated distributor plate and flows through the bed of solids at a velocity sufficient to support the weight of particles in a fluidized state. Bubbles form and collapse within the fluidized bed of material, promoting intense particle movement. In this state, the solids behave like a free flowing boiling liquid.   Very high heat and mass transfer values are obtained as a result of the intimate contact with the solids and the differential velocities between individual particles and the fluidized gas.     particles and the fluidized gas.               Unique Features. Enhanced heat and mass transfer through intimate contact and mixing with the fluidizing gas  Uniform reproducibility of  high quality output Uniform drying. No lump formation.   Application Foodstuffs in Granules or powder. Plastic industry. Pharmacy industry. Agglomerated Products.

SALIENT FEATURES : Small Space required Ultimate for heat sensitive products Less rotating parts so less maintenance Best for crystalline & free flowing products Uniform Drying results in faster drying Electric or steam heated Tilting arrangement of product container saves more labour Batch size from 30 kg to 500 kg APPLICATIONS : Bulk Drugs Pharmaceuticals Chemicals Paint Industries Food Product

We are engaged in offering a comprehensive range of Rotating Air Rings for LLD Film Plant, which is known for their unmatched quality and durability. These are constructed using supreme quality raw material and are available in various sizes and models. Keeping in mind the variegated requirements of our patrons, these can offered in customization solutions. Moreover, these are quality tested to ensure high performance and longer service life. Customers can purchase these from us at pocket friendly prices. Features: Easy to install Available in various models Maintenance free Specification: Exits Multy Double Lip Layer Rotating with Aircon

• Design Standard: : ASME B 16.34 / ASME Sec. VII – Div. 1
• Inspection & Testing Standard: : BS EN ISO 12266 – I (BS 6755 – I) / API 598
• Flange To Flange Distance: : DIN EN 558-1 / Mfg. Std.
• End Connection: : Flanged End to ANSI B 16.5, Class 150 / 300 / 600
•  : : BS 10 Table D / E / F / H
•  : : PN 6 / PN 10 / PN 16 / PN 25 / PN 40 / PN 64
•  : : DIN Standard / JIS Standard / IS Standard
•  : : Screwed – Threaded End to ANSI B 1.20.1
•  : : Socket Weld End to ANSI B 16.11
•  : : Butt Weld End to ANSI B 16.25
• Manufacuring Size Range: : 1″ (DN25) to 12″(DN 300)
• Pressure Rating of Valve: : 150# / 300# / 600# / 800#
•  : : PN 10 / PN 16 / PN 25 / PN 40 / PN 64

We are leading Manufacturer, Supplier and impoter of Hand Dryer like ABS – 2000W, Elegant-1500W, SS Hand Dryer - 2100W, SS Hand Dryer - 2500W, S S High Speed Hand Dryer - 1800W, Jet Hand Dryer, Eco Hand Dryer - 1200W and more. Feature • Material : Stainless Steel (304G) • Power : 2500 W • Power Supply : 230V/50Hz • Air Speed : 30m/s • RPM : 12000 • Drying Time :

• Material: MS
• Power: 16 Kw - 22 KW
• Voltage: 415 V
• Capacity: Approx 55-60 Kgs.
• Brand Name: Vishwakarma Engineering
• Max Temperature: 250 Deg C.
• Surface Finish: Powder Coated
• Automation Grade: Semi-Automatic
• Speed: 10 RPM

GMP Model Double walled construction, inner & outer made out of S. S. 316 / 304 sheet 2" Thick fibber glass insulation A manually operated Damper is provided Temperature up to 150°c. Tray Size: 32”L. x 16”W. x 1¼”H. S. S. TRAYS Size: 32" x 16" x 1 1/4" height.

We are a well-known Manufacturer and Supplier of robustly constructed No Loss Split Flow Type Dryer. No Loss Split Flow Type Dryer, offered by us, is fabricated with the best quality components. The No Loss Split Flow Type Dryer is precision made and is known for offering high performance. Silent Features : No purge lossLow dew pointLow pressure dropLow energy cost for given dew pointCompactReady to useReliable design & componentsAvailable to various standardsDew point based tower changeover controlsLow cost of total ownershipExtinctive operation & maintenance manuals The wet air entering the dryer first comes in contact with the ceramic element of the Pre-Filter.Here solid impurity up to 5 microns and water droplets are effectively removed. Now, saturated wet air (free of contaminants) enters the distribution box which splits the air stream and diverts it partly to the heater for heating and partly for adsorption. The stream going for adsorption enters via the top four-way valve to the Adsorber tower, which is packed with desiccant. This Desiccant has a high surface area to porosity, which enables to hold large quantities of moisture from the compressed air. It also possesses the property of giving up this moisture on heating. Dry air leaving Adsorber from the bottom via the four-way valve enters the After Filter. The After Filter alike the Pre Filter has ceramic elements which prevents the desiccant dust carry-over into the system. Going back to the distributor box, the second stream leaving the distributor passes through the heater where it is heated to the reactivation temperature of 180 Deg C. This hot air leaving the heater passes through the tower to be reactivated via top four-way valve. On its way through the tower, it carries the moisture adsorbed by the Desiccant (in the previous cycle) and leaves the tower via the bottom four-way valve. Now, this wet air enters into the Reactivation cooler where it gets cooled to 40 Deg C and the moisture in the air condenses which is removed by the Moisture separator. This air stream again joins by the main stream through the distributor. Hence, in this process, there is no loss of compressed air. The change over of the Adsorber tower is accomplished by a linkage mechanism connecting the two four way valve shanks. A double acting pneumatic cylinder actuates this linkage. The timing of operation of this cylinder is controlled by a four-way solenoid valve, which in turn is controlled by the timer in the control panel. The air actuating the solenoid valve is first lubricated in an oil lubricator before entering the pneumatic cylinder. The air used for this purpose is dry air and is tapped from the after filter. Two limit switches control the travel of the linkage mechanism.

We are counted among the prominent organizations engaged in providing a broad range of Y Type Strainer (Flange End).Our products are stringently tested on several parameters to ensure their flawlessness before delivering at clients' desired destination. These products are highly durable and can also be customized as per the specifications mentioned by the valuable patrons. Their varied features are as follows:   Features :   Perfect finish. High performance. Superior quality.

• Certification: CE Certified
• Weight: 100-150kg, 150-200kg, 50-100kg
• Color: Brown, Grey, Light White, Shiny Silver, Silver, White
• Voltage: 110V, 220V, 380V, 440V
• Condition: New, Used
• Power: 1-3kw, 3-6kw, 6-9kw, 9-12kw
• Warranty: 1yrs, 2yrs, 5yrs
• Application: Vapor Removing
• Automatic Grade: Automatic, Fully Automatic, Manual, Semi Automatic
• Driven Type: Electric

Dehydration of Fruits and vegetables plant at Nashik, India – This facility was set up to demonstrate to farmers the advantages of using solar to process and store their produce.

NRG has provided this dryer as an demonstration project, again with University of Mumbai, in a seaside locale with a large fishermen population, so that they can actively take free trials on the dryer. A lot of fishermen took trials of various types of fish, prawns etc in the dryer. Many of them were really impressed by the fact that the drying took only 6-7 hours instead of the usual 4-5 days in the open sun! A few of them have already approached us to help them set up similar plants for them.

• Material: Mild Steel and Stainless Steel
• Motor Power: 5-20 HP
• Automation Grade: Semi-Automatic
• Surface Treatment: Paint Coated
• Speed: 8-10RPM
• Working Capacity: 10 TPH-20 TPH

ASH-60SB Cover available in stainless steel brush finish High speed carbon brush motor Depth of 100mm gives asthetic look Voltage: 230V - 50Hz / Single Phase Power: 1300W Air Speed: 17 m/s Dimensions: H 236 X W 251 X D 100 mm Unit Weight: 3.8 kg. Heating coil protected with thermal fuse

Rotary Sand Drier of BMM  make is made specially to dry the FOUNDRY sand in the most economic way.  it saves the fuel / energy when compared with the other (make) types of driers. The DOUBLE PASS type Sand dryer design makes it compact & occupies  less ground space for higher capacities. Available with OIL fuel burner GAS fuel burner HOT Air Recuperator/Generator

The heatless dryer consists of 2 towers which, alternately cycle on drying and regeneration. Each tower is filled with a bed of adsorbent desiccant. The tower on drying cycle adsorbs the moisture from the incoming wet air. The tower on regeneration uses a small portion of the dried air passing through the desiccant to remove the adsorbed moisture. This air is later vented to the atmosphere. The cycle is maintained using a control panel.

• Air Dryer: Filter
• Heatless Dryer: Bag Filter

we offer Air Dryer. is the first joint venture company in India to Design, Engineer, Manufacture , Market & Service high efficiency purification equipment meeting demanding international quality standards Ever since its inception at Bangalore in 1986, the company has been seeking out new state-of-the-art filtration & drying technology to broaden its customer base by offering a wide range of products to meet customer demand of various application.  Compressed Air Filters  Process Filters  NG Filters  CNG Filters  Refrigerated Air Dryers  Desiccant Air Dryers

Stainless Steel (#304) brush finish cover, thickness 1.2 mm 230V AC / 50 Hz Motor type: 500 W, 2900 RPM, Brush type Motor thermal protection: Resetting thermostat turns off unit at 105 C Heating element: 500 W Drying time less than 15 sec. Heating element thermal protection: Resettinf thermostat turns off unit at 85 C Sound Level: 75± 1dB at 1 meter Air Speed: 90 m/s

fluidized bed dryer, Electric Blowers, CYCLONE, Pin Mill

Desiccant Dryers, Dehumidifiers, Desiccant Rotors, Silica Gel

Desiccant Air Dryer, Refrigerated Air Dryer, Air Compressor, Air Dryer

Spiral Dryer, Pipe Conveyor, Pneumatic Conveyor, Roller Conveyor

Dryers, Air Filters, Moisture Separator, Oxygen Plant