Epoxy Adhesives Dealers in Vadodara

• Packaging Type: Box and Jar
• Packaging Size: 25gm, 50gm, 250gm, 1 KG
• Color: dark gray colour
• Surface Of Application: sealing,gripping,joining,insulating variety of surfaces like ferrous and non-ferrous metals,p
• Putty Form: two component
• Categories: ndustrial, electrical, automotive, grouting civil cracks, general & household, handicraft applicat
• Grade Standard: RS
• Temperature Resistance: room temperature curing

fiberglass epoxy resin, 2-methylimidazole, Clear Casting Resin

Medium bodied, fast setting, high strength ABS solvent cement. Designed for all dames and schedules of ABS pipe and fittings through 8”(200mm) diameter with interference fit. For plumbing application (DWV, sewer & drain), conduit and foam core. Meets ASTM D-2235 standard requirements. Brookfield Viscosity: Minimum 500 cP Shelf Life: 2 years Store Product below 44°C (111°F)

• Type: Liquid
• Color: Transparent Reddish
• Brand Name: Ark
• Usage: Industrial
• Grade Standard: Chemical Grade
• Chemical Type: Epoxy Resin and Hardener
• Features: Underwater Curable

Underwater curable Epoxy Resin and Hardener

clear liquid epoxy resin, Aquarium Gravel & Sand, crushed gravel

We are offering self leveling epoxy is based on high performance epoxy resin & curing agents. It is sold under the brand name gal – sl and has a three-component system, consisting of resin, curing agent and carefully graded iron free fillers. Product is self-leveling to achieve excellent gloss, attractive, hygienic and very hardwearing & chemical resistant finish. features being smooth, joint less and monolithic surface it is very easy to clean and to make it dust freeproduct is based on high performance epoxy resin & curing agent system. The flooring system has excellent overall chemical resistance at ambient temperaturea carefully selected and graded high wearing aggregate gives very strong floor toppings to withstand normal foot and light vehicular trafficsystem is available in many attractive colors uses self leveling epoxy is highly recommended, for use, for extremely hygienic condition, chemical resistant and dust free areas like: automobile industriespharmaceuticals & aesthetic areasfood processing areasbottling plantselectronics industrieshospital operation theatreschemical plants surface preparation for successful performance of self leveling epoxy or any other flooring system can achieve only after proper surface preparation. It is the prime requirement that surface must correctly prepared before application. new concrete surface must be cured for 28 dayssurface must be free from any oils, grease, loose partials, curing aid chemicals, previously applied coating etcsurface must be fully dryfor old surface, all cracks, cavities should be repaired with gal epoxy puttythis is a very thin topping so cannot level any irregularities of levels of the original sub-base. Therefore, it is most important to make original surface in line & level, before application of self leveling epoxy application (primer coat) apply one coat of self leveling epoxy primer on properly prepared surface by brush and allow it to dry. self level toppling first mix the resin part a, thoroughly with slow speed mixer until uniform color is achieved. then add curing agent part b and mix again with mixer (@less then 80 rpm). After that add filler par c and mix with mixer until a homogeneous, lumps free mass is achieved (@less then 80 rpm). Then, pour it on primed surface and work with notched trowel to required thickness and apply spike roller to remove air. Proper mixing is the key factor to get uniform color and smooth surface. storage all the components resin, hardener & filler must be kept in cool, dry place and in covered shed. health & safety it is advisable to wear protective wears at the time of use of self leveling epoxy and all other gal brand products. In case of contact with eyes and skin, wash with plenty of water and consult a doctor.

• Material: Acrylic
• State: Paste
• Application: For Repair
• Grade Standard: Industrial Grade
• Shelf Life: 12 months
• Epoxy Glue Set: 20ml Glue (10ml Resin + 10ml Hardener)
• Quick Setting Action: 5 Minutes
• Completely Set Hardener: 30 Minutes
• Weight: 40.8 Grams
• Package Dimensions: 17.6 x 12.2 x 1.4 cm

Easy-Seal Regular Epoxy Putty Compound is a two component room temperature curing, easy to use multi-purpose epoxy putty. It useful in sealing, gripping, joining, insulating variety of surfaces like ferrous and non-ferrous metals, porcelain, ceramic, marble, concrete, granite, ivory, asbestos, glass, wood, certain plastics, etc. On curing, the compound sets into a hard mass that can be drilled, tapped, machined, cut and then painted. It has a good electrical insulating properties and the cured product is resistant to moisture, heat, mild acids and alkali. It is ideal for industrial, electrical, automotive, grouting civil cracks, general & household, handicraft applications. Resin and hardener components are equally mixed with both hands by rolling between two palms until a dark grey color (like dried cement mortar) is attained.

colored epoxy putties, customized epoxy putties, two pack epoxy putties

epoxy putties, Coating Chemicals

epoxy resin 450-500, Resins, epoxy resin 500-550, mutilated uf & mf resin

adhesive epoxy, Adhesive Binding, Electronic Instruments and Controls

Epoxy, arylic emulsions, Coatings, fire resistant paints

Switchgears, Instrument Transformers

Hybrid Polyester Powder, Polyester Resin (70:30), Polyester Resin (93:07)

formulated epoxy resin, ADHESIVE, electrical insulator epoxy resin

Epoxy, epoxy grouts, Waterproofing Chemical, Expansion Joint

cast bushings, Instrument Transformers, encapsulated coils

cast bushings, Instrument Transformers, encapsulated coils

Adhesives, Engineering Grouts, Plasticizers, ready mix plaster and putty