Epoxy Coatings Dealers in Jambuva, Vadodara

Transparent clear powder is a series of clear transparent thermoset powder designed for automotive wheel and furniture application where aesthetic appearance and chemical resistance is highly required. Available in all chemistry series, epoxy, polyester, polyurethane.   Offering excellent smoothness and brightness.   Excellent chemical resistance and mechanical properties.

• Color: all
• Industry: industrial
• Categories: Regular Solid Colors

• Feature: Easy To Digest, Effective, Moisture Proof, No Side Effect
• Form: Capsule, Powder, Tablet
• Packaging Type: Bottle, Glass Bottle, Plastic Bottle
• Packaging Size: 10-30 Cap, 30-60 Cap
• Usage: Industrial,Laboratory,Commercial
• Grade: Technical Grade,Analytical Grade,ACE Grade

• Brand Name: Powerfix
• Packaging Size: 10 kg
• Shelf Life: 12 months under normal storage condition in original sealed containers at 30 deg C
• Surface Preparation: Primed surface must be clean, dry, free of moisture and other contaminants.
• Environmental Conditions: Surface temperature must be at least 3°C above Dew Point to prevent condensation.
• Temperature: 5 – 40°C, 5 – 50°C
• Applied Over: Epoxy primed surface
• Application Method: Trowel & Roller
• Volume Solids: 100%
• DFT or Coat: 0.8 - 1.20 mm
• Theoretical Coverage or Coat: 0.62 m2 / kg at 1000 microns DFT
• Application Instruction: Stir the component A and component B respectively. If settling observed in the component A, loosen the settled material and mix it with the help of pneumatic stirrer.
• Special Notes: Practical covering capacity depends on application techniques, ambient conditions, wastage, surface condition etc. FLOORA SHINE is subject to colour change upon ageing. There may be minor variation in shade from batch to batch.
• Type: Three Pack
• Mixing Ratio: By weight
• Component A: 40 parts
• Component B: 10 parts
• Component C: 50 parts (Sand)
• Colour: Desired
• Gloss: Semi-Glossy
• Pot Life: 30 mins. at 30°C
• Curing Mechanism: Chemical reaction between the components
• Flash Point: Above 25°C
• Recoating Time: Min. 16 Hrs at 30°C
• Topcoating Time: Max. 48 hours at 30°C
• Drying Time @ (30°C): ------
• (i) Surface Dry: Max. 4-5 Hrs.
• (ii) Hard Dry: 18 – 24 Hrs.

• Material: Silicone Gel, Silicone Rubber
• Pattern: Dotted, Plain, Printed
• Texture: Hard, Soft
• Form: Liquid, Solid
• Thickness: 0.5-1mm, 1.5-2mm, 2.5-3mm, 3.5-4mm, 4.5-5mm
• Application: Flooring, Wall Coating
• Feature: Eco Friendly, Optimum Quality, Solvent Resistant, Water Resistant, Waterproof

• Packaging Type: tin
• Color: any
• Packaging Size: 1,4, 20 liter
• Brand Name: Reliable
• Usage/Application: industrial

• Grade Standard: Industrial Grade
• Color: Black
• Packaging Size: 20 Ltr
• Brand: Berger
• Usage/Application: Floors
• No. Of Components: Single Component

floor coating

INSULATIONS & COATINGS, Industrial Valves, Actuator, gasket, Welding Items

rubber coatings, tpu coated fabric, pu coated fabric, Eva coated fabrics

cool roof coatings, Coating, energy conservative coating, hygiene coating

Epoxy Flooring (epoxy floor coating) can be applied over many different materials, including steel, concrete, and wood. However, concrete is the best surface for laying epoxy floors. Epoxy floor coating performance is directly affected by surface preparation. The integrity and the service life will be reduced significantly if the surface is improperly prepared. A proper surface preparation ensures epoxy coating adhesion to the substrate and prolongs the life of the epoxy coating system.   Self Level Epoxy Topping for 2mm Thickness   Description : SLEF LEVEL is a solvent free, pigmented three component system consisting of liquid epoxy resin, specially formulated hardener and high quality fillers. In cured condition, It is hard, tough abrasion resistant material. It is resistant to wide range of chemicals including acids, alkalis, mineral oils, solvents etc. It also has excellent resistance to water. Scope of use : It is a self leveling system recommended over cement bound surfaces like concrete, screed and industrial tremix floors. Major applications are as floor toppings in automobile industries, home appliance industries, hospitals, pharmaceutical industries, dairy industries, agrochemical industries, chemical laboratories etc.    EPOXY POINTING Epoxy is most widely applicable and versatile material in Corrosion Technology. Epoxy used as Coating, Screeding, Bedding & Jointing material for Brick, Tile and Mandana Stone lining work in all industrial plants i.e. : Agro, Foods, Dairies, Pharmaceuticals, Bulk Drugs, Hospitals, Bravery & Breweries plants gives an excellent performance upto many years.Epoxy base Colorful & Joint less Screeding or Floor Coating are highly recommended in all above plants which provides dust free, very high strength and excellent Aesthetic view. Epoxy due to its very high compressive & bonding strength is very versatile material for grouting work in all types of RCC Structures, Foundations of D.G. Sets and Heavy Compressors, Bridges, Chimneys and Skyscraper buildings etc. 

Powder Coating, Industrial Painting

Powder Coating

die coating, cover fluxes, Magnesium Remover, grain refiners

lacquer coating, Antennas, fluid filling machines, curing machines

Anti Corrosion Coatings, epoxy putties, Coating Chemicals

Protective Coating, construction chemical like admixture, Grouts & Anchors

Xtralife Ultra Coatings, Ultra Z Coat Refractory Coating, XLAR Ceramic Tiles

Cable Powder Coating, metallic powder coating, Aluminum Coating Service

Powder Coating

polyerster powder coating, Powder Coatings, spray powder coating

Powder Coating, anodizing

decorative powder coating, coating powder, cold galvanizing spray

Metal Coating, stainless steel welding, MS Welding

Powder Coating, metal treatment chemicals, Phenol Crystal

PTFE Coating, Automobile Spring, Industrial Spring

industrial coating, Epoxy Paints, Specialty Chemical