Flanges Dealers in Waghodia, Vadodara

• Brand Name: Nupros Inc

Our organization deals in manufacturing, exporting and supplying of Insulating Flange Assembly that follows same working principle, but it is a bolted joint. The kits of these Insulating Flange Assemblies are manufactured from 14 nb to 100 nb. These Insulating Flange Assemblies are designed and manufactured to get 100% electrical insulation of flanged joints, cathodic protected separators, heater treaters and process piping connection. Each kit consists of insulating gasket, full length insulating sleeves, two insulating washers and two steel washers for each bolt. The purpose of insulating sleeves is to electrically separate the bolts and the insulating washers to provide electrical insulation for each of the nuts. This method of insulation provides high-reliability solution to complete the electrical insulation of flanged joint of vessels and piping.

We are offering flange nut.

We are offering teflon lined reducing flange. As per astm a 105, drilled to ansi 150# 300# din bs is jis gb std. On demand.

flange type: welding neck , long welding neck, lap joint, blind, slip-on, threaded, reducer, socket welding,orifice, spectacle blind   specifications: ansi b16.5, ansi b 16.47, ansi b16.36, ansi b16.48, mss sp44, api 590, api 6a, bs series, en 1092, uni series, din series . material: astm a105; astm a350 lf1,lf2 cl1/cl2, lf3 cl1/cl2; astm a694 f42, f46, f52, f56, f60, f65, f70 astm a182 f304/304l, f316/316l, f316h, f310, f312 astm a182 f1, f5a, f9, f11, f12, f22, f91 astm a182 f51/uns s31803, f53/uns s32750, f55/uns s32760 face type: flat face, raised face, ring joint face, lap-joint face,large male-female, small male-female,large tongue & groove, small tongue & groove size: 1/2" --- 60".

          Glass fabric laminates are manufactured using high-pressure techniques and are characterized by extremely high mechanical strength and outstanding electrical and thermal properties.

We are Importers, exporters, stockist & supplier of Stainless steel sheets, coils & plates. Our company presents a wide assortment of stainless steel sheets and plates that are procured from reliable manufacturers using the best manufacturing practices. These sheets and plates are tested for their quality before dispatching to the customers. User Industries: Chemicals, Fats, & Fertilizers, Sugar Mills & Distilleries, Cement Industries, Ship Builders, Paper Industries, Pumps, Petrochemicals, Oil & Natural Gas Organization in terms of the specific materials, Technology, Finance & Personal. Product Range:The following table represents size range, product standards and material grades of Sheet and Plates

• Size: 10Inch, 2Inch, 3Inch, 4Inch, 5Inch, 6Inch, 7Inch, 8Inch, 9Inch, UPTO 48"
• Type: Ss Flange Guards
• Material: Stainless Steel
• Shape: Round
• Thickness: 10-15mm, 15-20mm, 20-25mm, 25-30mm, UPTO 150 MM
• Application: Connection Pipes
• Grade: ANSI, ASME, ASTM
• Condition: New
• Finishing: Polished

AVAIABLE IN WIDE RANGE OF GRADE , AVAILABLE IN WIDE RANGE OF SIZE FROM 1/2 INCH TO 48 INCH IN READY STOCK AND AS PER YOUR BLUE PRINT GRADE 304,304L,316,316L,310,321,202

• Size: 2Inch, 3Inch, 4Inch, 5Inch, 6Inch, 7Inch
• Material: Stainless Steel
• Shape: Round
• Application: Automobiles Use, Industrial Use
• Color: Grey
• Surface Finishing: Polished
• Feature: Dimensional, High Tensile
• Application: Industrial, Laboratory
• Feature: Durable, High quality, Reasonable price
• Material: Glass, Metal
• Finishing: Polished
• Texture: Plain
• Weight: 230-750gm

Reducing flanges are used in pipe-to-pipe connections. Reducing flanges are a little easier to bolt up than non-reducing flanges. They provide the most perfect solution when you need to connect different size flanges. They offer the simplest and least expensive method of mating two different sized flanges.

• Size/ Diameter: 1 inch
• Fitting Type: Reducer
• Surface of Application: Chemical
• Country of Origin: Made in India
• Material: MS,SS
• Color: Blue, Grey
• Brand Name: JIH

Features: Concentric Reducer’s all flanges drilled to be ANSI B 16.5 Concentric Reducer’s all flanges will be 150# Concentric Reducer’s body will be C.I., W.C.B or S.S. 150#

Stainless Steel Spectacle Flange. A spectacle blind or spec blind, is a safety device used to isolate a section of line or piece of equipment when the line or equipment needs to be inspected or removed from service. It is different than a valve in that the blind is a permanent or long term isolation device. A spectacle blind is machined from a single piece of metal that is cut to match the pipe size, fit between two pipe flanges and requires an additional gasket when it is installed. Also, the bolts will need to be lengthened depending on what piping class and size blind is used. The thickness of the spectacle blind is specified based on the line pressure and pipe size. TYPES OF SPECTACLE BLINDS RING SPACER Ring spacers are bored to the matching pipe ID and are the same thickness as the “single blind” that it replaces. When removing a “single blind”, either the flange or associated piping must be pulled together to seal the line, or a “ring spacer” must be installed to fill the gap. Thick single blinds or rigid piping systems normally require ring spacers. SINGLE/ LINE BLIND OR BLANK A positive shut-off device normally installed adjacent to, or in conjunction with, a valve. Their purpose is to prevent accidental flow through a pipeline to a vessel. With the exception of cast iron, plastic, or fiberglass services, they are not drilled with bolt holes, but fit inside the bolt circle of mating flanges. Pipeline blinds or blanks are not the same as bolting blind flanges. Single blinds use standard gaskets. A combination of a “single blind’ and a “ring spacer” can be fabricated for field convenience as a single unit. Weight consideration and the associated difficulty of handling heavy pieces in the field are a primary consideration in specifying a “spectacle blind” or a combination of blinds. Spectacle blinds are meant to be rotated to change blind/spacer orientation. SPECTACLE BLIND A spec blind is a combination of a ring spacer and single blind. They are usually permanently installed in a piping system and rotated as needed. VAPOR BLIND Similar to a “single blind”, but thinner, normally 1/8″ (3mm) to 5/16″ (8mm) thick. These are positive sealing devices intended to prevent accidental flow or leakage of vapors into a pipeline or vessel, usually while the system is in service. Vapor blinds are not to be subject to differential pressure. TEST BLANK A test blank is specially designed blank used for hydrostatic or other incompressible fluid testing purposes only. Their advantage is cost and weight savings since higher allowable stress values (or lower safety factors) are used in their design.

insulated flange joints assembly, applicator brush, insulating sleeves

• Material: CS / MS / SS
• Size: 15NB to 600NB
• Country of Origin: Made in India
• Brand Name: NG
• Usage/ Application: Industrial
• Thickness: 3mm to 6mm

We are offering forged flanges. We are 20 years old leading steel forging company based in vadodara, india, manufacturing steel forged flanges. We have recently installed 4500 ton open die forging press along with 60 ton rail bound manipulator along with related heat treatment furnaces based on n gas, polymer and water quenching tanks in a new heavy steel forging plant located in baroda city of gujarat state of india. we can manufacture and supply following products upto 40 tons weight single piece. • forged steel flanges up to 72" • forged steel bars, rolls and shafts, step shafts from 160 to 1000 mm dia. • discs forgings up to 3000 mm dia. • valve body, hollow shell, rings, forgings etc. we can manufacture all above products in various types of steels like carbon steel, stainless steel, alloy steel, duplex stainless steel etc. we have our own heavy machining facility and in house test facility for quality control along with qualified and experienced manpower in the field of heavy forgings.

• Thickness: 1 mm - 20 mm
• Material: Stainless Steel
• Surface Treatment: Polished
• Shape: Rectangular
• Steel Grade: SS 304
• Usage/Application: Construction

We are offering mstl reducing flange. Mstl reducing flange offered by us, is available with us in various sizes and shapes. We proffer our highly acclaimed mstl reducing flange at reasonable prices.

We manufacture, supply and stockist of high quality steel flanges in various sizes for different applications in waterworks, petrochemicals, refinaries, chemical industries, construction work etc. aterworks, petrochemicals, refinaries, chemical industries, construction work etc.

We supply flanges which find varied applications in numerous industries such as waterworks, petrochemicals, refineries, chemical industry, construction works etc. 15 NB to 1500 NB in 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS available with NACE MR 01-75 Form : Socket Weld Slip On Blind Lapped Screwed Weld Neck Long Weld Neck Reducing Spectacle Ring Joint Stainless Steel & Nickel Alloy Flanges We supply stainless steel & nickel alloy flangesStainless Steel Flanges Standard : ASTM / ASME A/SA 182Grade : F 304, 304L, 304H, 309S, 309H, 310S, 310H, 316, 316TI, 316H, 316L, 316LN, 317, 317L, 321, 321H, 347, 347H, 904L.Nickel Alloy FlangesStandard : ASTM / ASME SB 564 / 160 / 472Grade : UNS 2200 (NICKEL 200), UNS 4400 (MONEL 400), UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600), UNS 6601 (INCONEL 601), UNS 6625 (INCONEL 625), UNS 10276 (HASTELLOY C 276), UNS 2201 (NICKEL 201), (ALLOY 20 / 20 CB 3) Carbon Steel & Alloy Steel Flanges Our carbon steel flanges and forged alloy steel flanges, conform to the international quality standards and are widely noted for their durability, reliability and superior functionality, these metal flanges are cost effective in price.Carbon Steel Flanges Standard : ASTM / ASME A/SA 105 / 350 LF 2Alloy Steel FlangesStandard : ASTM / ASME A/SA 182 Grade : F5, F9, F11, F12, F22, F91. Copper Alloy & Duplex Steel Flanges We offer best quality copper alloy flanges and duplex steel flanges, which find operation in different industries for various purposes.They are available in affordable rates.Copper Alloy Flanges Standard : ASTM / ASME SB 61 / 62 / 151 / 152.Grade : UNS NO. C 92200, UNS NO. C 83600, UNS NO. 70600, 71500, C 70600 (CU -NI- 90/10), C 71500 (CU -NI- 70/30), UNS NO C 10100, C 10200, C 10300, C 10800, C 12000, C 12200Duplex Steel FlangesStandard : ASTM / ASME A/SA 182Grade : F5, F9, F11, F12, F22, F91.

• Size: 1" to 12" inch
• Shape: cylindrical
• Country of Origin: Made in India
• Product Type: Lined Component
• Pressure: 20 bar/300 psi.g. Full vacuum resistance depending upon the Process conditions

Dutron cpvc pipes & fittings - dutron upvc pipes & fittings dutron swr pipes & fittings - dutron rigid pvc pipes & fittings dutron hdpe pipes.

We are reckoned as reputed manufacturer, exporter and supplier of quality range of tower flanges in india.

We are offering adaptor backing flanges.

Kaka Water Tank, Kitchen Furniture, over head water storage tanks

Flange, Industrial Valve

Flanges, Pipes, tubes

Bellow flanges are used to fit a bellow to a glass component. Standard Bellow are made Cast Iron. Cast Iron with Epoxy Coated, Cast Iron with PTFE coated, Aluminum, Silumin, Stainless Steel 304 & 316 and are used in FBV, VB, FB type bellow.

Bellow flanges are used to fit a bellow to a glass component. Standard Bellow are made Cast Iron. Cast Iron with Epoxy Coated, Cast Iron with PTFE coated, Aluminum, Silumin, Stainless Steel 304 & 316 and are used in FBV, VB, FB type bellow.

Flanges