Shelf Life: 12 months under normal storage condition in original sealed containers at 30 deg C
Surface Preparation: Primed surface must be clean, dry, free of moisture and other contaminants.
Environmental Conditions: Surface temperature must be at least 3°C above Dew Point to prevent condensation.
Temperature: 5 – 40°C, 5 – 50°C
Applied Over: Epoxy primed surface
Application Method: Trowel & Roller
Volume Solids: 100%
DFT or Coat: 0.8 - 1.20 mm
Theoretical Coverage or Coat: 0.62 m2 / kg at 1000 microns DFT
Application Instruction: Stir the component A and component B respectively. If settling observed in the component A, loosen the settled material and mix it with the help of pneumatic stirrer.
Special Notes: Practical covering capacity depends on application techniques, ambient conditions, wastage, surface condition etc. FLOORA SHINE is subject to colour change upon ageing. There may be minor variation in shade from batch to batch.
Type: Three Pack
Mixing Ratio: By weight
Component A: 40 parts
Component B: 10 parts
Component C: 50 parts (Sand)
Colour: Desired
Gloss: Semi-Glossy
Pot Life: 30 mins. at 30°C
Curing Mechanism: Chemical reaction between the components