Honeywell PID Controller Dealers in Vadodara

• Display Type: 4 Digit/7 Segment
• Voltage: 24 VAC/DC
• Input Sensor: RTD, TC, Linear
• Model No.: DC1040
• Usage/Application: PID
• Control Type: Proportional/On-Off
• Input Type: Thermocouple
• Control output Type: Relay/SSR
• Brand: Honeywell
• Mounting Type: Panel
• Frequency: 50/60 Hz

• Feature: Precisely engineered , Require less maintenance ,Optimum functionality
• Item Code: PID-C-01

We are one of the leading Electronics PID Controller Suppliers in India. Our Digital PID Controller is A PID controller calculates an "error" value as the difference between a measured process variable and a desired set point. The Industrial PID Controller attempts to minimize the error by adjusting the process control inputs. The PID parameters used in the calculation must be tuned according to the nature of the system. The response of the controller can be described in terms of the responsiveness of the controller to an error, the degree to which the controller overshoots the set point and the degree of system oscillation. Features : InputThermocouple : J, K, T, R, S, C, N, E, L, U, W, B,Platinel IIRTD (2 wire 3 wire): Pt100Linear mV : -5 to 56 mVCurrent : 0 4 to 20 mAVoltage : 0 to 415 acdcMax 3 outputsOutput 2 programmable as Heat Cool AlarmOutput 3 programmable as an alarmSelectable lower display optionSelectable temperature unit - °C °FAuto Manual mode4 -Zone PIDHeat - Cool PID algorithmRamp - SoakSoft Start (set point ramping for process startup)85 to 270 VACDC supply voltage (24 VACDC optional )Program security

• Material: PC UL94V2 self-extinguishing. Front: PC UL94V2
• Voltage: 12 V DC, 24 V DC
• Type: Automatic, Manual
• Model Name/Number: ATR144
• Brand: Pixsys
• Current: 1 A
• Input Value: Universal[All type TC & RTD, linear voltage/current]
• Enclosure: 32 x 74 (front) x 53 mm
• Power Supply: 24..230 V AC / DC +-15% 50/60 Hz - galvanic isolation 2,5KV
• Consumption: 5VA
• Display: 4 digits 0,38" white + 5 digits 0,28" red
• Environmental conditions: Temperature 0-45 DegreeC, humidity 35..95 RH%
• Weight: Approx. 120 g
• Sealing: Front panel: IP65 (with gasket). Enclosure and terminal block: IP20
• Quick set-up options: Memory Card, LABSOFTVIEW software, EASY-UP codes

Application Controlling temperature, humidity, pressure, flow, pH. Detecting voltage, ampere, power, phase failure Features PID auto tuning Two FUZZY PID control processes, with two individual outputs. Multi range input( TC, RTD, mV ), each 14 BIT resolution. Relay output, SSR drive, 4~20mA changable by a module. Three-point alarm, with 19 alarm modes. Non - volatile memory. Self - diagnosis function. AUTO ZERO and AUTO SPAN circuit keep good accuracy. Free range voltage from AC 85V to 265V or DC 10 to 50V. Data lock function 2 pattern each 8 segments programming procedure available to be ordered. Input 2 can be used in Remote SV. Optional transmitter output. With output percentage control, if sensor broken, the controller automatically board manually operation to be controlled by heating power with output percentage.

• Display Type: 4 Digit/7 Segment
• Brand: Honeywell
• Model No.: UDC2500
• Control Type: PID/On-Off
• Input Type: Thermocouple, RTD
• Mounting Type: Panel

PID CONTROLLER, Conductivity Analyzer, pH Analyzer, process calibrator

PID CONTROLLER, RH and Temperature Transmitter, Motor Load Monitor